Uniform image drift while guiding - how does it occur?
Posted: Tue Apr 26, 2022 12:55 am
I've gone from a piggyback arrangement for my guide scope and image scope to an asymmetric side-by-side set up. I'm still working through the transition, but have noticed that I'm getting longer hot pixel trails in my stack that seem to be completely aligned with my RA. Also, I believe I'm getting more movement in the RA on my imaging camera, affecting my image sharpness.
I'm not actually concerned about the hot pixels as I know how to deal with them, but I am concerned about this apparent movement they reveal in my RA. Since I'm using a guide scope, it seems like the hot pixels should stay put on the imager and not form trails in the stack (in a perfect world). Of course, in the real world flexure and other random movement between the two scopes is going to cause the hot pixels to form patterns, but it seems like these should be random patterns -- so not straight lines along the RA axis.
I did some live stack testing the other night with a 0.8"/pixel scale on both the guide scope and the image scope. My guiding looked pretty good in PHD with an RMS of 0.4" on the Dec and 0.6" on the RA. I'm still tuning this in on the new set up, but afraid I may be wasting my time if there is something wrong with the set up causing the RA movement in the image scope to differ from the guide scope.
I know that I still have some cone error (about 4 minutes) and pointing error between the guide scope and image scope (about 5 minutes). Initially, I have not been concerned about these, but now I am wondering if this can cause my two cameras to move at different rates in RA. Generally, I understand these errors have very little effect on imaging, but I am wondering if it is just more pronounced with my asymmetrical side-by-side arrangement. Or maybe I'm just not understanding how hot pixels can make uniform trails in your image stack when you are autoguiding.
Any insight or ideas appreciated.
Thanks!
Bill
I'm not actually concerned about the hot pixels as I know how to deal with them, but I am concerned about this apparent movement they reveal in my RA. Since I'm using a guide scope, it seems like the hot pixels should stay put on the imager and not form trails in the stack (in a perfect world). Of course, in the real world flexure and other random movement between the two scopes is going to cause the hot pixels to form patterns, but it seems like these should be random patterns -- so not straight lines along the RA axis.
I did some live stack testing the other night with a 0.8"/pixel scale on both the guide scope and the image scope. My guiding looked pretty good in PHD with an RMS of 0.4" on the Dec and 0.6" on the RA. I'm still tuning this in on the new set up, but afraid I may be wasting my time if there is something wrong with the set up causing the RA movement in the image scope to differ from the guide scope.
I know that I still have some cone error (about 4 minutes) and pointing error between the guide scope and image scope (about 5 minutes). Initially, I have not been concerned about these, but now I am wondering if this can cause my two cameras to move at different rates in RA. Generally, I understand these errors have very little effect on imaging, but I am wondering if it is just more pronounced with my asymmetrical side-by-side arrangement. Or maybe I'm just not understanding how hot pixels can make uniform trails in your image stack when you are autoguiding.
Any insight or ideas appreciated.
Thanks!
Bill