sensor analysis
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
sensor analysis
I have 2x ZWO cameras, one mono the other colour. If I do a sensor analysis for each camera will SharpCap remember these and apply the right analysis in the smart histogram when the camera is selected? Thanks for any help.
-
admin
- Site Admin
- Posts: 17517
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: sensor analysis
Hi,
yes, absolutely (as long as you use the cameras via SharpCap's direct control, not via ASCOM/DirectShow drivers). SharpCap stores the analysis results by the name of the camera.
If you happen to have two cameras of exactly the same model then there is no need to analyse both except out of interest - results for different samples of the same model are usually incredibly similar to each other.
cheers,
Robin
yes, absolutely (as long as you use the cameras via SharpCap's direct control, not via ASCOM/DirectShow drivers). SharpCap stores the analysis results by the name of the camera.
If you happen to have two cameras of exactly the same model then there is no need to analyse both except out of interest - results for different samples of the same model are usually incredibly similar to each other.
cheers,
Robin
Re: sensor analysis
Thanks Robin for your help.