Hi there,
I want to find the exact sweet spot on my camera. According to QHY, this should be at gain 58 or 59.
When I do the sensor analysis, gain 10, 20, ... 50, 60, 70, ... is done.
Is there a way to do this with gain 55, 56, 57, 58, 59, 60?
Thanks and best regards
Daniel
Sensor analysis QHY268m with gain 55-60
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13177
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sensor analysis QHY268m with gain 55-60
Hi,
only by using the Python scripting built into SharpCap, and even then the use of added points is currently broken for QHY cameras (but I have a fix and intend to upload a fixed version of SharpCap later today). See this thread : viewtopic.php?f=19&t=4685
cheers,
Robin
only by using the Python scripting built into SharpCap, and even then the use of added points is currently broken for QHY cameras (but I have a fix and intend to upload a fixed version of SharpCap later today). See this thread : viewtopic.php?f=19&t=4685
cheers,
Robin
-
- Posts: 9
- Joined: Mon Mar 22, 2021 8:45 am
Re: Sensor analysis QHY268m with gain 55-60
Hi Robin,
thank you.
I did it.
The sweet spot is then probably at gain 56 and not at gain 60.
Therefore, I will now make my recordings with Gain 56.
Regards,
Daniel
thank you.
I did it.
The sweet spot is then probably at gain 56 and not at gain 60.
Therefore, I will now make my recordings with Gain 56.
Regards,
Daniel
- Attachments
-
- Sensor Analyse.JPG (129.46 KiB) Viewed 303 times