Page 1 of 1
Dithering without guide with ascom synscan app driver
Posted: Tue Nov 23, 2021 1:38 pm
by Antonio
Hi!
I have wrote here
viewtopic.php?f=38&t=3206&start=30 but maybe is better a new 3d.
My question: is it possible have dithering without guide with ascom synscan app driver? I must use it for az-gti.
Thank's!
Re: Dithering without guide with ascom synscan app driver
Posted: Tue Nov 23, 2021 1:50 pm
by admin
Hi,
you should be able to use 'Dither only guiding' as shown here -
https://docs.sharpcap.co.uk/4.0/#!2!Guiding%20Tab . That will work as long as your ASCOM driver supports pulse guiding commands. I'm afraid I don't use the Synscan driver, so I can't be sure that it does support them fully, but worth a try.
cheers,
Robin
Re: Dithering without guide with ascom synscan app driver
Posted: Tue Nov 23, 2021 2:13 pm
by Antonio
I will check better tonight. Thank you!
Re: Dithering without guide with ascom synscan app driver
Posted: Tue Nov 23, 2021 8:31 pm
by Antonio
You have right! It work perfectly!
(I thought to find this option directly into livestacking menu. Sorry if you have lost time for me..)
Re: Dithering without guide with ascom synscan app driver
Posted: Wed Nov 24, 2021 11:24 am
by admin
Hi,
you are right in a way - the dithering options used to be in the live stacking area in SharpCap 3.2... In SharpCap 4.0 you can also dither without live stacking, so it made more sense to move the dithering options to the settings.
Anyway, good to hear it is working.
cheers,
Robin