Not enough stars to plate solve
Posted: Wed Nov 03, 2021 8:46 am
I have 2 observatories, one with a C11/Hyperstar on a wedge, the other with an array of refractors on a Paramount. I need to polar align both setups. I thought the Hyperstar rig was going to be impossible and tackled it first. I got "Excellent" polar alignment in under half an hour. Two things were in my favour (I now realise) - an 11" mirror caught plenty of photons so that Sharpcap could easily see enough stars to plate solve, and being on a wedge, rotating the scope by 90 degrees leaves the scope pointing through the dome aperture - so no issues there.
Now we come to the refractor array. The first issue is that Sharpcap does not appear to be picking up enough stars for a plate solve (it has done so sporadically, but not well enough to continue). The refractor is a Sky90 with a Starlight Xpress M26C OSC CCD. MaximDL shows plenty of stars in the frame with a 10s exposure and bin 1. Sharpcap doesn't show enough stars even with bin 2 and up to 20 s exposures. I am guessing this can't be right. There is an additional problem. How do I swing the GEM mount through 90 degees AND keep the scope lined up through the aperture at the same time?
Now we come to the refractor array. The first issue is that Sharpcap does not appear to be picking up enough stars for a plate solve (it has done so sporadically, but not well enough to continue). The refractor is a Sky90 with a Starlight Xpress M26C OSC CCD. MaximDL shows plenty of stars in the frame with a 10s exposure and bin 1. Sharpcap doesn't show enough stars even with bin 2 and up to 20 s exposures. I am guessing this can't be right. There is an additional problem. How do I swing the GEM mount through 90 degees AND keep the scope lined up through the aperture at the same time?