Advice on Hyperstar Brain Output
Posted: Mon Sep 20, 2021 4:58 pm
Firstly, thank you Robin for Sharpcap and your excellent support of it.
I have a hyperstar under light polluted skys (no filters) and am trying to understand the output from the brain. I have watched the CMOS presentation several times.
Specifically, I have an ASI294MC camera on a 9.25SCT with a Hyperstar under Bortle 6 skys. My 'Sky Brightness is measured at 92 e/pixels/s. Running sharpcap 4.0.8173.0 - 9/14/2021. When I run the brain, requesting 'Max Dynamic Range' it typically tells me that the optimum exposure is a second (or less) at gain=121. This number of frames is tough to work with. If I set a 2 second minimum exposure it lengths the optimal exposure to 4.7s still at gain=120. If I increase the minimum exposure to 5s it says the optimal exposure is now 20.2s at gain=0. I have the screen prints if you want to see them.
We know the ASI204MC drops the read noise at gain=120
Two questions.
1.
The brain recommendation switches to gain=0 at longer exposures because the read noise is such a small contributor relative to the sky brightness at this point?
2.
Is the only thing I lose by taking longer exposures with gain=120 potentially dynamic range? In other words if I confirm I am not over exposing pixels I am ok to go longer? For dim DSOs 30 or 60 second exposures seem a sensible length what I understand these are longer than the minimum in terms of stacking noise given my sky conditions but as long as I am not over exposing pixels what is the downside?
I don't want to ignore the brain output but sub-second exposures are tricky to deal with, just want to check I am not doing something silly by going longer (as long as I am not blowing out pixels).
Thanks!
I have a hyperstar under light polluted skys (no filters) and am trying to understand the output from the brain. I have watched the CMOS presentation several times.
Specifically, I have an ASI294MC camera on a 9.25SCT with a Hyperstar under Bortle 6 skys. My 'Sky Brightness is measured at 92 e/pixels/s. Running sharpcap 4.0.8173.0 - 9/14/2021. When I run the brain, requesting 'Max Dynamic Range' it typically tells me that the optimum exposure is a second (or less) at gain=121. This number of frames is tough to work with. If I set a 2 second minimum exposure it lengths the optimal exposure to 4.7s still at gain=120. If I increase the minimum exposure to 5s it says the optimal exposure is now 20.2s at gain=0. I have the screen prints if you want to see them.
We know the ASI204MC drops the read noise at gain=120
Two questions.
1.
The brain recommendation switches to gain=0 at longer exposures because the read noise is such a small contributor relative to the sky brightness at this point?
2.
Is the only thing I lose by taking longer exposures with gain=120 potentially dynamic range? In other words if I confirm I am not over exposing pixels I am ok to go longer? For dim DSOs 30 or 60 second exposures seem a sensible length what I understand these are longer than the minimum in terms of stacking noise given my sky conditions but as long as I am not over exposing pixels what is the downside?
I don't want to ignore the brain output but sub-second exposures are tricky to deal with, just want to check I am not doing something silly by going longer (as long as I am not blowing out pixels).
Thanks!