Re: Mount control by Sharpcap
Posted: Tue Aug 17, 2021 2:09 pm
by woldsweather
Yes using the ASCOM driver. I've never used the handset always used synscan app on phone. If I do that I'll have to remove the EQMOD cable to insert the wifi dongle.
I have noticed however the RA and DEC values are changing (mainly the RA) in the mount control box on SCap and the DEC changes when I hit up or down so maybe it is moving. I was expecting to hear a whirring of the drive but perhaps it will only move slowly.
I tried to focus the camera out of the winder but I have no view beyond 5m from this room (though I can focus on a transmitter 7 miles away in the lounge so could pack up all the gear and decant to there). Perhaps the log tells al?
Here it is:
Info 14:58:13.907292 #1 Starting... in void SharpCap.Program.Main()
Info 14:58:14.047917 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Info 14:58:14.360415 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 14:58:14.860417 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 14:58:15.126044 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 14:58:15.141667 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 14:58:15.454169 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AltairDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type SVBonyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type iNovaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.532290 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.579168 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.579168 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.594791 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.610418 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.610418 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.672917 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device SynScan App Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.891667 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs)
Info 14:58:15.907288 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 14:58:15.907288 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 14:58:16.422917 #9 =='LogInfo Thread' (New Thread)
Info 14:58:16.422917 #9 AvailablePhysicalMemory: 5648Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 CPU: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz with 2 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 CurrentDirectory: C:\Program Files (x86)\SharpCap 4.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 GCMemory: 120Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 InstallationId: a5e0dbfd-86ac-444a-bfa4-9a85435c2498 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSEdition: Microsoft Windows 10 Pro in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSFullVersion: 10.0.19043 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSProductType: 0x6 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSVersion: Microsoft Windows NT 6.2.9200.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\JuneHP\AppData\Local\Microsoft\WindowsApps; in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 ProcessMemory: 162Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 ProcessorCount: 2 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 SharpCapBitness: 32 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SharpCapExecutablePath: file:///C:/Program Files (x86)/SharpCap 4.0/SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SharpCapVersion: 4.0.8026.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SystemMemory: 8094Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 WindowsMediaVersion: 12.0.19041.1151 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.797916 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs)
Debug 14:58:16.829167 #1 Started new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel) in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:16.907290 #1 Preview host created in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:16.907290 #1 Parent being changed on PreviewPanel in void SharpCap.UI.ScrollZoomForm.OnParentChanged(object sender, EventArgs eventArgs)
Info 14:58:16.907290 #1 Creating control form in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:17.547921 #1 Control Form created in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Debug 14:58:17.969790 #1 Ended new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel) in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Debug 14:58:18.321356 #1 Started void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e)
Debug 14:58:18.324354 #1 Ended void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e)
Debug 14:58:18.343348 #1 Started void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Debug 14:58:18.544355 #1 Docking setup in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Debug 14:58:18.732353 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Debug 14:58:19.071351 #1 Timebomb checked in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 14:58:19.079355 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Info 14:58:19.277964 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 14:58:21.137342 #9 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 14:58:21.199843 #1 BaslerDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.199843 #1 QHYDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.199843 #1 ASIDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: ALTAIRGP327C (Altair Cameras, AA201022090358327C2E076DAF3A970) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 SVBonyDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 PointGreyDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 SxDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 iNovaDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 AstCamPanDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 CelestronDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 MoravianDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 AtikDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 P1DeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: HP Webcam-101 (DirectShow Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Altair Astro Camera ASCOM Driver (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Altair Astro Camera ASCOM Driver 2 (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Camera V2 simulator (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.590462 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 14:58:26.231088 #1 Splash and tips done in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Debug 14:58:26.246728 #1 Ended void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Info 14:58:29.309220 #1 Updating devices menu in void SharpCap.ViewModels.CamerasMenuViewModel.UpdateDevicesMenu()
Info 14:58:31.309218 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.OpenCameraAction ALTAIRGP327C executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 14:58:31.356087 #1 Changing camera from none to ALTAIRGP327C in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 14:58:31.418585 #1 OpeningDevice event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 14:58:31.418585 #1 Opening device : ALTAIRGP327C (via Altair Cameras) in void SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag)
Debug 14:58:31.418585 #1 Started void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow)
Debug 14:58:31.434213 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow)
Info 14:58:31.434213 #1 Started void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 14:58:31.434213 #1 Started void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 14:58:31.746723 #1 Setting ImageProvider CurrentDevice to SharpCap.Cameras.Altair.AltairCameraProxy in void SharpCap.Base.BaseImageProvider.set_CurrentDevice(ICameraProxy value)
Debug 14:58:31.746723 #1 Ended void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 14:58:31.777964 #1 Started CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Debug 14:58:31.793603 #1 Started ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls() in ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls()
Debug 14:58:31.809223 #1 Started ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RAW8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RAW12 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RGB24 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space MONO8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.887337 #1 Altair Trigger Mode detected - enabling exposures up to 900s in new SharpCap.Cameras.Altair.ExposureIntFeature(AltairCam cam)
Debug 14:58:31.918592 #1 Ended ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl)
Warning 14:58:31.934213 #1 Flat frame correction not available - processor does not support SSE4 in bool SharpCap.Base.FlatFrame.get_Available()
Info 14:58:31.949835 #1 Ended CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Info 14:58:31.949835 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 14:58:31.965463 #1 Started bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Debug 14:58:31.965463 #1 Ended (No default defined for this camera) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 14:58:31.965463 #1 Starting preview on ALTAIRGP327C in void SharpCap.MultiCaptureProvider.StartPreview()
Info 14:58:31.984478 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 14:58:31.985477 #1 Starting Preview on ALTAIRGP327C, 1920x1080, Bayer_RGGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Debug 14:58:32.292101 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 14:58:32.307136 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 14:58:32.312133 #21 =='Grab Thread' (New Thread)
Debug 14:58:32.313132 #21 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 14:58:32.319134 #21 Got max resolution of {Width=1920, Height=1080}, allocating 6220800 for temp buffer in void SharpCap.Cameras.Altair.AltairCameraProxy.SetupGrabThread()
Debug 14:58:33.037124 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 14:58:33.043126 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 14:58:33.047120 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:33.066123 #1 StatusBarUpdate event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:33.066123 #1 Connecting to mount EQMOD ASCOM HEQ5/6 in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 14:58:33.068121 #1 Connecting to mount : EQMOD ASCOM HEQ5/6 in void SharpCap.Models.Mount.set_Connected(bool value)
Debug 14:58:33.082172 #1 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:33.083172 #1 Creating ASCOM Telescope mount of type EQMOD.Telescope ('EQMOD ASCOM HEQ5/6') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:33.211766 #21 Paged memory check based on total memory of 8094Mb, available of 5686Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 14:58:33.212764 #21 Paged memory enabled at 3001Mb for Frame Cache and 1046Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 14:58:33.213763 #21 Assigning 1046Mb to non-pool memory and 3001Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Debug 14:58:35.791261 #1 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:36.991928 #1 The mount claims to be EQMOD HEQ5/6, EQASCOM V2.00q
USITG, EQMOD ASCOM Driver, 1.0 in void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()
Info 14:58:37.003928 #1 The mount reports an alignment mode of algGermanPolar in void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()
Info 14:58:37.005928 #1 Mount 'EQMOD ASCOM HEQ5/6' now Conneted:True in void SharpCap.Models.ConnectableHardware.OnConnectedChanged()
Info 14:58:37.009917 #1 Astap found at c:\Program Files\Astap\Astap.exe in bool SharpCap.ImageProcessing.AstapPlateSolverFactory.CheckInstalledImpl()
Info 14:58:37.027912 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.030913 #1 Plate solver detection : AstroTortilla - Not found in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.032915 #1 Plate solver detection : All Sky Plate Solver - Not found (binary path missing : C:\Users\JuneHP\AppData\Local\Astrometry\bin) in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.033915 #1 Plate solver detection : Ansvr - Not found at C:\Users\JuneHP\AppData\Local\cygwin_ansvr in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.034914 #1 Plate solver detection : Cygwin/Astrometry based - Not found at C:\cygwin in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Warning 14:58:37.105501 #1 Focal Length not available via ASCOM from EQMOD ASCOM HEQ5/6 : Exception of type 'PropertyNotImplementedException' : Property read EQMOD.Telescope FocalLength is not implemented in this driver.
Stack Trace: at object ASCOM.DriverAccess.MemberFactory.CallMember(int memberCode, string memberName, Type[] parameterTypes, params object[] parms) in C:/ASCOM Build/Export/ASCOM.DriverAccess/MemberFactory.cs:line 278
at double ASCOM.DriverAccess.Telescope.get_FocalLength() in C:/ASCOM Build/Export/ASCOM.DriverAccess/Telescope.cs:line 607
at double SharpCap.MountProxy.ASCOM.MountInterceptionProxy.get_FocalLength() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 308
at double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 57 in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Warning 14:58:37.107491 #1 Inner Exception : System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException: Property FocalLength is not implemented by this telescope driver object.
--- End of inner exception stack trace ---
at object RuntimeType.InvokeDispMethod(string name, BindingFlags invokeAttr, object target, object[] args, bool[] byrefModifiers, int culture, string[] namedParameters)
at object RuntimeType.InvokeMember(string name, BindingFlags bindingFlags, Binder binder, object target, object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, string[] namedParams)
at object Type.InvokeMember(string name, BindingFlags invokeAttr, Binder binder, object target, object[] args, CultureInfo culture)
at object ASCOM.DriverAccess.MemberFactory.CallMember(int memberCode, string memberName, Type[] parameterTypes, params object[] parms) in C:/ASCOM Build/Export/ASCOM.DriverAccess/MemberFactory.cs:line 242 in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Warning 14:58:37.109490 #1 Inner Exception : System.Runtime.InteropServices.COMException (0x80040400): Property FocalLength is not implemented by this telescope driver object. in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Info 14:58:37.200225 #1 StatusBarUpdate event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:37.203223 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 14:58:37.385010 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:37.995247 #1 Loading library sensor characteristics from C:\Program Files (x86)\SharpCap 4.0\SensorLibrary\ALTAIRGP327C~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 14:58:38.024605 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 14:58:38.147945 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.OpenCameraAction ALTAIRGP327C complete in async Task SharpCap.ViewModels.UIAction.Execute()
Debug 14:58:38.959105 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 14:58:38.967108 #1 Started new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 14:58:38.969106 #3 =='Monitor mount movement thread' (New Thread)
Debug 14:58:38.969106 #3 Started void SharpCap.ViewModels.MountViewModel.MountMonitor() in void SharpCap.ViewModels.MountViewModel.MountMonitor()
Debug 14:58:38.971107 #1 Ended new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 14:58:38.971107 #1 Triggering mount initialization in new SharpCap.ViewModels.MountViewModel(Mount model)
Debug 14:58:38.979100 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 14:58:38.979100 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 14:58:39.169410 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.181420 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.200414 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.209407 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.233688 #1 Testing slew rates for availability : 1, 2, 4, 16, 60, 120, 239.3447, 480, 720, 960, 1920, 4800, 9600, 12000 in IEnumerable<double> SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRates()
Info 14:58:39.238714 #1 Slew rate of 960 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.240718 #1 Slew rate of 1920 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.241714 #1 Slew rate of 4800 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.243716 #1 Slew rate of 9600 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.244714 #1 Slew rate of 12000 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.244714 #1 EQMOD ASCOM HEQ5/6 has 9 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 14:58:39.246713 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 14:58:39.250719 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:30.513487 #1 Updating devices menu in void SharpCap.ViewModels.CamerasMenuViewModel.UpdateDevicesMenu()
Info 15:03:30.721004 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.RestartPreviewAction executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 15:03:30.842289 #1 Stopping preview from Camera object : Restart preview request in void SharpCap.Models.Camera.StopPreview(string reason)
Info 15:03:30.843293 #1 Stopping preview : Restart preview request in void SharpCap.MultiCaptureProvider.StopPreview(string reason)
Info 15:03:30.844290 #1 Stopping preview from MultiCaptureProvider in void SharpCap.MultiCaptureProvider.StopPreview(string reason)
Info 15:03:30.845289 #1 Stopping preview : Restart preview request in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Info 15:03:30.846293 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason) in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Debug 15:03:30.848293 #1 Started void SharpCap.Base.BaseImageProvider.Stop() in void SharpCap.Base.BaseImageProvider.Stop()
Info 15:03:30.848293 #1 Stopping preview, 3077 frames processed, 0 frames dropped in void SharpCap.Base.BaseImageProvider.Stop()
Debug 15:03:30.850292 #1 Started void SharpCap.Base.CameraProxyBase.StopPreview() in void SharpCap.Base.CameraProxyBase.StopPreview()
Info 15:03:30.931191 #21 Capture cancelled, returning null frame in BufferFrame SharpCap.Base.CameraProxyBase.GrabFrameWithRateLimit(DateTime startTime, CancellationToken cancellationToken)
Debug 15:03:30.932193 #21 Ended void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Debug 15:03:31.033337 #1 Ended void SharpCap.Base.CameraProxyBase.StopPreview() in void SharpCap.Base.CameraProxyBase.StopPreview()
Debug 15:03:31.049337 #1 Ended void SharpCap.Base.BaseImageProvider.Stop() in void SharpCap.Base.BaseImageProvider.Stop()
Info 15:03:31.051331 #1 Capture Event : StopPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.059337 #1 Drop stashed frames reclaimed 2076672 bytes of memory. in void SharpCap.Base.Memory.MappedBufferFactory+MemoryManager.DropStashedFrames()
Info 15:03:31.134293 #1 StopPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.166301 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason) in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Info 15:03:31.166301 #1 Starting preview on ALTAIRGP327C in void SharpCap.MultiCaptureProvider.StartPreview()
Info 15:03:31.169297 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 15:03:31.169297 #1 Starting Preview on ALTAIRGP327C, 1920x1080, Bayer_RGGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Debug 15:03:31.170295 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 15:03:31.172298 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 15:03:31.173293 #26 =='Grab Thread' (New Thread)
Debug 15:03:31.174301 #26 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 15:03:31.175299 #26 Got max resolution of {Width=1920, Height=1080}, allocating 6220800 for temp buffer in void SharpCap.Cameras.Altair.AltairCameraProxy.SetupGrabThread()
Debug 15:03:31.180298 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 15:03:31.182298 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 15:03:31.184292 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.186298 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 15:03:31.193301 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.203294 #1 Loading library sensor characteristics from C:\Program Files (x86)\SharpCap 4.0\SensorLibrary\ALTAIRGP327C~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 15:03:31.207830 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 15:03:31.280402 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.RestartPreviewAction complete in async Task SharpCap.ViewModels.UIAction.Execute()
Debug 15:03:31.664402 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 15:03:31.666405 #1 Started new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 15:03:31.667408 #28 =='Monitor mount movement thread' (New Thread)
Debug 15:03:31.667408 #28 Started void SharpCap.ViewModels.MountViewModel.MountMonitor() in void SharpCap.ViewModels.MountViewModel.MountMonitor()
Debug 15:03:31.670407 #1 Ended new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 15:03:31.670407 #1 Triggering mount initialization in new SharpCap.ViewModels.MountViewModel(Mount model)
Debug 15:03:31.675407 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:31.675407 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:31.824273 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.832264 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.847264 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.854267 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.856261 #1 Testing slew rates for availability : 1, 2, 4, 16, 60, 120, 239.3447, 480, 720, 960, 1920, 4800, 9600, 12000 in IEnumerable<double> SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRates()
Info 15:03:31.857260 #1 Slew rate of 960 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.858266 #1 Slew rate of 1920 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.859265 #1 Slew rate of 4800 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.861260 #1 Slew rate of 9600 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.862259 #1 Slew rate of 12000 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.862259 #1 EQMOD ASCOM HEQ5/6 has 9 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 15:03:31.862259 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 15:03:31.863265 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:34.774967 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 15:03:34.873686 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.Execute()