The SharpCap Deep Sky Sequence Planner
Posted: Mon Jan 25, 2021 8:57 pm
Hi folks,
this is a new feature that is currently taking shape in the 3.3 beta releases - an easy-to-use sequence planner that is much simpler than the full sequence editor.
The planner contains an area at the top where you configure the initialization steps needed for your capture plan - things like camera settings, target, cooling, guiding and focus.
Below that is the capture list - here you can set up capture of light, dark, flat etc frames, including filter changes if you have a filter wheel and the option to override the default exposure/gain if necessary. You can specify pauses before/after captures if you need to arrange for flat illumination or cover the aperture.
At the bottom is the list of actions (currently only one) to be taken at the end of the imaging run. In future there might be more options here - shut down the computer for instance.
The choices you make here build a sequence (using the same steps available in the sequence editor). You can even edit the sequence created by the planner to customize it to your needs.
You will see that there are a lot of buttons marked 'Test' on the planner - each of these will run a test of the options/capture step it sits next to, so that for instance you can test the autofocus settings work correctly on their own rather than having to run the whole sequence just to get to that stage. Capture list 'Test' buttons will capture just one frame using the provided settings - enough to make sure it's working right and any filter/setting changes take effect correctly.
Some of the additional options I am thinking of adding include things like
* refocus on filter change
* options to get the guiding application started if it isn't yet guiding
* pause and alert if guiding lost
* load a saved capture profile
and potentially more. Really keen to get feedback on if/how this works for people and what other features they would like to see.
Robin
PS. In the future there will be a Solar/Lunar/Planetary sequence planner too
this is a new feature that is currently taking shape in the 3.3 beta releases - an easy-to-use sequence planner that is much simpler than the full sequence editor.
The planner contains an area at the top where you configure the initialization steps needed for your capture plan - things like camera settings, target, cooling, guiding and focus.
Below that is the capture list - here you can set up capture of light, dark, flat etc frames, including filter changes if you have a filter wheel and the option to override the default exposure/gain if necessary. You can specify pauses before/after captures if you need to arrange for flat illumination or cover the aperture.
At the bottom is the list of actions (currently only one) to be taken at the end of the imaging run. In future there might be more options here - shut down the computer for instance.
The choices you make here build a sequence (using the same steps available in the sequence editor). You can even edit the sequence created by the planner to customize it to your needs.
You will see that there are a lot of buttons marked 'Test' on the planner - each of these will run a test of the options/capture step it sits next to, so that for instance you can test the autofocus settings work correctly on their own rather than having to run the whole sequence just to get to that stage. Capture list 'Test' buttons will capture just one frame using the provided settings - enough to make sure it's working right and any filter/setting changes take effect correctly.
Some of the additional options I am thinking of adding include things like
* refocus on filter change
* options to get the guiding application started if it isn't yet guiding
* pause and alert if guiding lost
* load a saved capture profile
and potentially more. Really keen to get feedback on if/how this works for people and what other features they would like to see.
Robin
PS. In the future there will be a Solar/Lunar/Planetary sequence planner too