HyperStar and Smart Histogram
Posted: Sat Sep 19, 2020 9:42 pm
The last 2 nights I've been imaging M31 with my C8HD + HyperStar using SharpCap.
My camera is a QHY183C in case that matters and I'm in a Bortles 7 location.
So I used the smart histogram which has always given me great exposure using the rear camera with or without the reducer.
It told me to set my exposures to 3.4 seconds with 0 gain. I thought that was nuts because that would mean an hour of capture would result in over 1,000 frames.
So I ignored it and ran 30 second subs and got pretty good results. In fact I'd say surprisingly good results considering I was running subs that were 8x longer than Smart Histogram was suggesting.
The next night I added my Optolong L-Pro light pollution filter to see what would happen. This time, the smart histogram told me to set my exposure to a more reasonable 16.2 seconds with 0 gain. Obviously the filter was cutting out a lot of light pollution. This time I decided to listen and ran about 90 minutes at those settings.
The problem is, it resulted in such underexposed frames that any sort of image calibration, even just using bias resulted in calibrated frames that were practically blank. So I had to skip calibration altogether. I've never had this happen before. And the final integrated image had (not surprisingly) far less detail than the 30 second subs with no filter.
Is there some trick to using the Smart Histogram with a HyperStar? Are there settings in SharpCap somewhere that I need to tweak because of the change in focal length.
My camera is a QHY183C in case that matters and I'm in a Bortles 7 location.
So I used the smart histogram which has always given me great exposure using the rear camera with or without the reducer.
It told me to set my exposures to 3.4 seconds with 0 gain. I thought that was nuts because that would mean an hour of capture would result in over 1,000 frames.
So I ignored it and ran 30 second subs and got pretty good results. In fact I'd say surprisingly good results considering I was running subs that were 8x longer than Smart Histogram was suggesting.
The next night I added my Optolong L-Pro light pollution filter to see what would happen. This time, the smart histogram told me to set my exposure to a more reasonable 16.2 seconds with 0 gain. Obviously the filter was cutting out a lot of light pollution. This time I decided to listen and ran about 90 minutes at those settings.
The problem is, it resulted in such underexposed frames that any sort of image calibration, even just using bias resulted in calibrated frames that were practically blank. So I had to skip calibration altogether. I've never had this happen before. And the final integrated image had (not surprisingly) far less detail than the 30 second subs with no filter.
Is there some trick to using the Smart Histogram with a HyperStar? Are there settings in SharpCap somewhere that I need to tweak because of the change in focal length.