Polar align error not stable

Using SharpCap's Polar Alignment feature
Post Reply
Perrywarburton
Posts: 1
Joined: Fri Jan 31, 2020 3:44 pm

Polar align error not stable

Post by Perrywarburton » Fri Jan 31, 2020 3:52 pm

Hi I’m really hoping someone can help me!
When I’m doing my polar alignment I can get it to a excellent state, say 0.2 but it will jump around from 0.2 to 0.10 and sometimes it jumps from excellent to good.
Is there something I’m not doing right or is this due to seeing conditions?
I’d really like to get the polar alignment stable so I can get it as excellent as possible. Say 0.0 would be good.
I’ll be putting my mount on a pier soon so I’d like to get this working.
It’s driving me mad because I just don’t know how good the alignment is.
Any help would be great.
Cheers.

User avatar
admin
Site Admin
Posts: 3541
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Polar align error not stable

Post by admin » Fri Jan 31, 2020 8:37 pm

Hi,

First check if any of the hints on the polar alignment troubleshooting page help – https://www.sharpcap.co.uk/sharpcap/fea ... leshooting .

If none of that helps then please tell us a bit more about your setup (camera, scope, settings you're using, etc)

Thanks, Robin

Post Reply