Page 1 of 1

Deep Sky Imaging: Lightpollution Rate 2,3 or 2,6 ?

Posted: Thu Dec 26, 2019 7:59 pm
by dkracht
Hi,
in his talk on Practical Astronomy Show Robin Glover showed a slide "Light Pollutions Rates" which shows 2.6 as the rate for a "Standard Observer" (i.e. Bortle 5, Pixel size 3.75, CMOS mono sensor, QE 50%, f/6. The number 2.6 is further used in the subsequnt calculations.
On the website http://tools.shapcap.co.uk the Light Pollution calculation leeds to 2.3 electrons per pixel per second.
What is the right number to do further calculatins with?
Kind regards & Clear Skies
Dietrich

Re: Deep Sky Imaging: Lightpollution Rate 2,3 or 2,6 ?

Posted: Fri Dec 27, 2019 9:59 pm
by admin
Hi,

the tools.sharpcap.co.uk site has the correct calculations in it (although they are only approximations anyway). I suspect that I had made some of the slides for the talk with the value of 2.6 rather than 2.3 due to a miscalculation and kept the figures (and the slides) rather than re-work them.

If you try putting Bortle 4.9 and 5.1 into the web site you will see how sensitive the final figure is to the change in Bortle number.

Robin