First Light with the new ZWO ASI533MC Pro
Posted: Mon Dec 16, 2019 5:39 pm
I downloaded the new version of SharpCap that Robin provided to get this new camera working. Unique camera- square sensor, no amp glow due to back illumination, and very low noise) - giving a clean image after very short exposures.
Here is my first image, Little Dumbbell Nebula- only 30 minutes of live stacking (15x120s) with some Pixinsight post-processing. Camera set at 200 gain, 10 brightness, and -10 temp. Guiding and dithering were applied along with darks but no flats. This was done on my C11"EdgeHD @f/7 with the Optolong L-emhance filter. A better FOV would be to use this at f/4 or f/2 as the small square dimensions on this scope at f/7 really limits you to the smallest objects. However, it is an amazing camera with no amp glow and noise almost non-existent. This was done at Bortle 6 skies with average seeing and transparency and an 89% moon illumination. I did not get a chance to see what the Brain suggested. Will do that another day.
Here is my first image, Little Dumbbell Nebula- only 30 minutes of live stacking (15x120s) with some Pixinsight post-processing. Camera set at 200 gain, 10 brightness, and -10 temp. Guiding and dithering were applied along with darks but no flats. This was done on my C11"EdgeHD @f/7 with the Optolong L-emhance filter. A better FOV would be to use this at f/4 or f/2 as the small square dimensions on this scope at f/7 really limits you to the smallest objects. However, it is an amazing camera with no amp glow and noise almost non-existent. This was done at Bortle 6 skies with average seeing and transparency and an 89% moon illumination. I did not get a chance to see what the Brain suggested. Will do that another day.