Creating Flats
Posted: Thu Sep 05, 2019 6:47 am
I have a question about flats creation. I read the users guide but wanted to get some comments on the following advice on taking flats posted in Cloudynights ( https://www.cloudynights.com/topic/5797 ... adu-value/ ). The advice was as follows:
________________________
"The ideal ADU value for flats varies by camera. You want about the highest ADU value that you can get before pixels either saturate or, in the case of the ASI1600 or any anti-blooming camera, you want to be just below where the pixel response goes non-linear.
You can find this yourself by taking increasingly longer exposures and graphing the number of ADUs per exposure length. The graph should be an increasing diagonal line that starts straight, but eventually levels off. The ideal ADU value is just before the line levels off."
_______________________
I have an ASI290MC planetary camera. SharpCap is great since it shows the ADU units up in the right hand corner. I created plots as suggested as shown below. This camera is an 8 bit one so 256 max ADUs.
You can see that depending on the brightness of my light box I get fairly linear plot up to 23 msec on the medium bright setting of the light box and 500 msec on the low brightness setting. This is not close to the 50% setting (128 ADU). I was thinking of looking at all my color histograms and keeping the right most setting of the highest ADU histogram (white, red, blue, green) reading just below the 23 or 500 msec reading depending on the light box setting.
Am I on track with this procedure? Would appreciate thoughts on this.
________________________
"The ideal ADU value for flats varies by camera. You want about the highest ADU value that you can get before pixels either saturate or, in the case of the ASI1600 or any anti-blooming camera, you want to be just below where the pixel response goes non-linear.
You can find this yourself by taking increasingly longer exposures and graphing the number of ADUs per exposure length. The graph should be an increasing diagonal line that starts straight, but eventually levels off. The ideal ADU value is just before the line levels off."
_______________________
I have an ASI290MC planetary camera. SharpCap is great since it shows the ADU units up in the right hand corner. I created plots as suggested as shown below. This camera is an 8 bit one so 256 max ADUs.
You can see that depending on the brightness of my light box I get fairly linear plot up to 23 msec on the medium bright setting of the light box and 500 msec on the low brightness setting. This is not close to the 50% setting (128 ADU). I was thinking of looking at all my color histograms and keeping the right most setting of the highest ADU histogram (white, red, blue, green) reading just below the 23 or 500 msec reading depending on the light box setting.
Am I on track with this procedure? Would appreciate thoughts on this.