Change Camera position to Polar Align
Posted: Sun Jul 21, 2019 4:37 pm
Hi, before changing the mount I did polar alignments using SharpCap with a Polemaster QHY camera that connect through the polar alignment hole in the AP mount. Now with the 10Micron 2000 mount its does not have a polar alignment hole through the mount, so the previous workflow that consisted in turning/rotation the RA to 90 degrees and whereby the QHY camera did not move I cannot do it anymore.
So, the only place that I connected the QHY camera was with a bracket to the dovetail just underneath the telescope, meaning that the camera will rotate as i rotate the RA.
Question, do I continue with the same workflow as I did previously, or there is any another method to polar alignment given this new setup??
Thanks
Carlos
So, the only place that I connected the QHY camera was with a bracket to the dovetail just underneath the telescope, meaning that the camera will rotate as i rotate the RA.
Question, do I continue with the same workflow as I did previously, or there is any another method to polar alignment given this new setup??
Thanks
Carlos