Basically, it stays stuck in 'stage one'.
I did the best I could - I aligned it 'correctly' with it pointing south, the right degrees, and yet it doesn't seem to be within the 5-7 degrees it insists on.
I have shifted where I set up, but am still having trouble...
Am I pointing at the right spot?
http://nova.astromet...48784#annotated
This is after moving it slightly to the right.
http://nova.astromet...948796#original
Stuck on page 1 - Trying to work though what's wrong..
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
admin
- Site Admin
- Posts: 17466
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Stuck on page 1 - Trying to work though what's wrong..
Hi,
Unfortunately your links to astrometry.net don't seem to have come out correctly
If you can fix the links I will have a look, otherwise tried to post the image that you uploaded to be plate solved and if possible a screenshot of SharpCap showing the polar alignment tool at the bottom when you are stuck. It's also worth checking out the troubleshooting page – https://www.sharpcap.co.uk/sharpcap/fea ... leshooting
Cheers, Robin
Unfortunately your links to astrometry.net don't seem to have come out correctly
If you can fix the links I will have a look, otherwise tried to post the image that you uploaded to be plate solved and if possible a screenshot of SharpCap showing the polar alignment tool at the bottom when you are stuck. It's also worth checking out the troubleshooting page – https://www.sharpcap.co.uk/sharpcap/fea ... leshooting
Cheers, Robin