Upgrading from 3.0 to 3.2 on PrimaluceLab Eagle 2
Posted: Fri Oct 12, 2018 2:18 pm
Hi all! New to the forum and starting off with a problem!
I have been running version 3.0 as the pre-installed version on my PrimaluceLab Eagle 2 with an Altair Astro GPcam mono for lunar imaging but mainly guiding with no problems whatsoever. However I am now in the process of moving from a modified DSLR to an AltairAstro 183C Pro TEC camera and of course 3.0 won't recognise this camera. (At least that what I think was happening.)
I therefore tried to upgrade the Eagle 2 to the latest as of today 3.2 version of SharpCap. This upgrade failed several times, (log attached). Unlike my PC and my laptop where it installed no problem. From the log it show that SharpCap was trying to link the webpage, go.microsoft.com/fwlink/?LinId=780596 when it failed. "Failed to send request to URL."
My Eagle 2 is not connected to the web, (unlike my PC and laptop). I have it set up for remote use in the field or back garden using Microsoft Remote Desktop running Windows 10 Enterprise on an iPad mini.
At last the questions: 1. Does version 3.2 require access to the internet to install on a device?
2. If that is not the problem, what does the error log suggest it is?
Note that I have just successfully installed version 3.1 onto my Eagle 2 which does recognise the 183 camera. Going forward I would prefer to be able install version 3.2 and beyond, especially without having to reconfigure my Eagle 2!
Thanks in advance for any help.
Colin
I have been running version 3.0 as the pre-installed version on my PrimaluceLab Eagle 2 with an Altair Astro GPcam mono for lunar imaging but mainly guiding with no problems whatsoever. However I am now in the process of moving from a modified DSLR to an AltairAstro 183C Pro TEC camera and of course 3.0 won't recognise this camera. (At least that what I think was happening.)
I therefore tried to upgrade the Eagle 2 to the latest as of today 3.2 version of SharpCap. This upgrade failed several times, (log attached). Unlike my PC and my laptop where it installed no problem. From the log it show that SharpCap was trying to link the webpage, go.microsoft.com/fwlink/?LinId=780596 when it failed. "Failed to send request to URL."
My Eagle 2 is not connected to the web, (unlike my PC and laptop). I have it set up for remote use in the field or back garden using Microsoft Remote Desktop running Windows 10 Enterprise on an iPad mini.
At last the questions: 1. Does version 3.2 require access to the internet to install on a device?
2. If that is not the problem, what does the error log suggest it is?
Note that I have just successfully installed version 3.1 onto my Eagle 2 which does recognise the 183 camera. Going forward I would prefer to be able install version 3.2 and beyond, especially without having to reconfigure my Eagle 2!
Thanks in advance for any help.
Colin