Re: Exception error
Posted: Fri Jun 20, 2025 2:56 am
21:50:26.383000 #1 Ended CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Info 21:50:26.383268 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Info 21:50:26.383395 #1 Capture Event : DeviceOpened in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.385007 #1 DeviceOpened event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.390139 #1 Setup camera controls, 51 found in void SharpCap.Models.Controls.SetCaptureControl(CaptureControl cc)
Info 21:50:26.391663 #1 Destroying mount proxy which was a SharpCap.Models.NullProxy for On Camera ST4 in void SharpCap.Models.Mount.CleanupProxy()
Debug 21:50:26.393845 #1 Started bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:50:26.397492 #1 Loading capture profile _autosave (ZWO ASI533MC Pro) in List<string> SharpCap.Models.Camera.LoadCaptureProfileWithErrorInfo(string profileName)
Info 21:50:26.443179 #1 Starting preview on ZWO ASI533MC Pro in void SharpCap.MultiCaptureProvider.StartPreview(PreviewChangeReason reason)
Debug 21:50:26.652075 #1 The WPF render thread has been located for monitoring at thread ID 23472 in ProcessThread SharpCap.Base.ThreadLoadMonitor.FindWPFRenderThread()
Info 21:50:26.652621 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Info 21:50:26.653677 #1 Starting Preview on ZWO ASI533MC Pro, 3008x3008, RGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 21:50:26.659669 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 21:50:26.660077 #1 Started void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Debug 21:50:26.660450 #1 Ended void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Info 21:50:26.664280 #1 Changing output format to AVI files (*.avi) for short exposure based on user preference of avi in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:26.664717 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 21:50:26.666106 #32 =='Grab Thread' (New Thread)
Debug 21:50:26.666214 #32 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 21:50:26.745249 #32 Switching ZWO camera into video mode, exposure is now 50ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:50:26.747241 #33 =='ASI Grab Thread' (New Thread)
Debug 21:50:26.747330 #33 Started void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc() in void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc()
Debug 21:50:26.749049 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 21:50:26.749873 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 21:50:26.750873 #33 Paged memory check based on total memory of 12014Mb, available of 4647Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.751125 #33 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.751225 #33 Assigning 2048Mb to non-pool memory and 2048Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Info 21:50:26.755080 #33 Paged memory check based on total memory of 12014Mb, available of 4647Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.755162 #33 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.755275 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.760610 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls, CancellationToken cancellationToken)
Info 21:50:26.825840 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:50:26.845545 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RGB24.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.846347 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RGB24.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.847364 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.847969 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Info 21:50:26.855619 #1 Did not find library sensor characteristics at C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC~RGB24.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:50:26.858880 #1 Did not find library sensor characteristics at C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC Pro~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:50:26.874549 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Info 21:50:26.887082 #1 Changing output format to FITS files (*.fits) for long exposure based on user preference of fits in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:26.891301 #1 Ended (Profile applied) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:50:26.928148 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Debug 21:50:27.387858 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 21:50:27.388922 #1 Started new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:50:27.390581 #1 Ended new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:50:27.393550 #1 Started new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Debug 21:50:27.393998 #1 Ended new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Info 21:50:27.419482 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:50:27.425607 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:50:27.435196 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:50:27.448577 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.457644 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.461210 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:50:27.578291 #35 =='ASCOM UI Thread for Focuser' (New Thread)
Info 21:50:27.578318 #35 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 21:50:27.578759 #35 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 21:50:27.579271 #35 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:50:27.579946 #35 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:50:27.580026 #35 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:50:27.601519 #35 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 21:50:27.678523 #35 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 21:50:27.682336 #35 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:50:27.682492 #35 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 21:50:27.684120 #35 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Info 21:50:27.687647 #1 Focuser 'Celestron Focuser Driver' now Conneted:True in void SharpCap.Models.ConnectableHardware<T>.OnConnectedChanged(IApplication app)+() => { }
Debug 21:50:27.692168 #1 Sequencer : Completed : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.693158 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.693948 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.694316 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.723660 #1 Started void SharpCap.ViewModels.FocuserViewModel.Initialize() in void SharpCap.ViewModels.FocuserViewModel.Initialize()
Debug 21:50:27.725273 #1 Started void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.728980 #1 Initializing Celestron Focuser Driver, MaxPosition = 42193, MaxChange = 42193, TempCompAvailable = False in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.730687 #37 =='ASCOM UI Thread for Mount' (New Thread)
Info 21:50:27.730703 #37 Connecting to mount : Celestron Telescope Driver in void SharpCap.Models.Mount.set_Connected(bool value)
Info 21:50:27.731689 #37 Creating mount proxy to control Celestron Telescope Driver in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 21:50:27.732649 #37 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:50:27.732729 #37 Creating ASCOM Telescope mount of type ASCOM.Celestron.Telescope ('Celestron Telescope Driver') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Debug 21:50:27.733573 #1 Ended void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.740476 #37 Created ASCOM Telescope mount Celestron StarSense AVX 1.22 (ASCOM Celestron Telescope Driver.), Version=6.1, InterfaceVersion=3, Info=ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron
Scope Type StarSense AVX 1.22 in SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)+() => { }
Debug 21:50:27.740641 #37 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:50:27.997695 #37 The mount claims to be Celestron StarSense AVX 1.22, ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron
Scope Type StarSense AVX 1.22, ASCOM Celestron Telescope Driver., 6.1 in void SharpCap.MountProxy.ASCOM.MountWrapper.DoMountInitialization()
Info 21:50:28.000932 #37 The mount reports an alignment mode of GermanPolar in void SharpCap.MountProxy.ASCOM.MountWrapper.DoMountInitialization()
Info 21:50:28.056141 #37 Available RA tracking rates from mount are Sidereal, Lunar, Solar in IEnumerable<TrackingRate> SharpCap.MountProxy.ASCOM.MountWrapper.GetSupportedTrackingRates()
Warning 21:50:28.330828 #37 Mount time of 2025-06-18T22:09:56.0000000 differs from system time 2025-06-20T02:50:28.2961387Z by -1720.5 minutes in void SharpCap.Models.Mount.CheckMountTime()
Warning 21:50:28.332224 #37 Mount sidereal time of 9.6776812863176 differs from system calculated sidereal time 14.431714704299964 by -285.2 minutes, based on longitude of -94.71861111111112 calculated at 2025-06-20T02:50:28.3314578Z in void SharpCap.Models.Mount.CheckMountTime()
Debug 21:50:28.332270 #1 Notification (Status=Warning): The mount reports a time of 2025-06-18T22:09:56.0000000, which differs from the PC time by -1720.5 minutes. This may cause issues with mount movements. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:50:28.334175 #1 Mount 'Celestron Telescope Driver' now Conneted:True in void SharpCap.Models.ConnectableHardware<T>.OnConnectedChanged(IApplication app)+() => { }
Debug 21:50:28.339040 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 21:50:28.339148 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 21:50:28.357494 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.358266 #1 Slew rates are : 0-4 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.361810 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.361979 #1 Slew rates are : 0-4 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.368570 #1 Testing slew rates for availability : 0.004178074623790057, 0.008356149247580115, 0.01671229849516023, 0.03342459699032046, 0.06684919398064092, 0.13369838796128183, 0.25068447742740346, 0.5013689548548069, 1.000000017408644, 2.0054758194192277, 3.0082137291288413, 4.010951638838455, 8.02190327767691, 20.054758194192274, 40.10951638838455, 50.136895485480686 in (List<AxisRate> slewRates, bool hasFixedRates) SharpCap.MountProxy.ASCOM.MountWrapper.DetermineSlewRates(Tuple<double, double>[] axisRates0, Tuple<double, double>[] axisRates1)
Info 21:50:28.369550 #1 Slew rate of 4.010951638838455 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369649 #1 Slew rate of 8.02190327767691 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369750 #1 Slew rate of 20.054758194192274 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369835 #1 Slew rate of 40.10951638838455 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369919 #1 Slew rate of 50.136895485480686 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.371397 #1 After testing, the following slew rates are valid : 1x, 0.004 deg/s, 2x, 0.008 deg/s, 4x, 0.017 deg/s, 8x, 0.033 deg/s, 16x, 0.067 deg/s, 32x, 0.134 deg/s, 60.00000000000001x, 0.251 deg/s, 120.00000000000001x, 0.501 deg/s, 239.3447x, 1.000 deg/s, 480.00000000000006x, 2.005 deg/s, 720x, 3.008 deg/s in (List<AxisRate> slewRates, bool hasFixedRates) SharpCap.MountProxy.ASCOM.MountWrapper.DetermineSlewRates(Tuple<double, double>[] axisRates0, Tuple<double, double>[] axisRates1)
Info 21:50:28.371725 #1 Celestron Telescope Driver has 11 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 21:50:28.372744 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 21:50:28.377852 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 21:50:28.385120 #1 Sequencer : Completed : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:28.385459 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:28.387686 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:50:28.389108 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:50:29.399540 #1 Notification (Status=Warning): It looks like you are taking long exposure images at a bit depth of 8 bits. You might want to change to a higher bit depth to capture maximum detail in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:50:31.868298 #33 Switching ZWO camera into still mode, exposure is now 8000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Debug 21:50:32.160065 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Debug 21:50:40.745246 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Debug 21:50:40.747084 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Debug 21:50:49.412078 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Debug 21:50:49.414163 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Info 21:50:51.217192 #1 Changing output format to AVI files (*.avi) for short exposure based on user preference of avi in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:51.551353 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Info 21:50:51.551417 #33 Switching ZWO camera into video mode, exposure is now 1000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:51:54.974688 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.BlindSolveAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Debug 21:51:54.980912 #1 Started async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveExAsync(PlateSolvePurpose frt, CancellationToken cancellationToken, double radius, RADecPosition hintPosition, bool setPixelPositionData) in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveExAsync(PlateSolvePurpose frt, CancellationToken cancellationToken, double radius, RADecPosition hintPosition, bool setPixelPositionData)
Debug 21:51:54.992853 #1 Notification (Status=Warning): Capturing a frame to plate solve... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:54.995371 #1 Not allowing previous frame when capturing for plate solving, since exposure is 1.00s and the mount only reports stable pointing for 0.31s in async Task<FrameToSolve> SharpCap.Models.CurrentCameraFrameToSolveProvider.GetFrameFromCameraAsyncImpl(ICamera camera, CancellationToken cancellationToken)
Info 21:51:54.998812 #1 CapturingFrame event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.000525 #1 StartCapture event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.016838 #4 =='Single Frame Thread' (New Thread)
Debug 21:51:55.016915 #4 Setting capture writer to SharpCap.Base.ForwardingCaptureFileWriter in void SharpCap.Base.BaseImageProvider.SetCaptureWriter(ICaptureFileWriter writer)
Debug 21:51:55.017212 #4 Started void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit) in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Info 21:51:55.126309 #4 Capture frame limit set to 1 when starting capture in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Debug 21:51:55.127736 #4 Ended void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit) in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Debug 21:51:55.709652 #4 Started void SharpCap.Base.BaseImageProvider.BeforeStopCapture() in void SharpCap.Base.BaseImageProvider.BeforeStopCapture()
Debug 21:51:55.710941 #4 Ended void SharpCap.Base.BaseImageProvider.BeforeStopCapture() in void SharpCap.Base.BaseImageProvider.BeforeStopCapture()
Debug 21:51:55.813511 #4 Clearing capture writer because: Capture single frame complete in void SharpCap.Base.BaseImageProvider.ClearCaptureWriter(string reason)
Debug 21:51:55.813607 #4 Ended bool SharpCap.Base.CaptureProviderBase<T>.CaptureSingleFrame(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken) in bool SharpCap.Base.CaptureProviderBase<T>.CaptureSingleFrame(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)
Debug 21:51:55.813752 #4 CaptureSingleFrame returned True in Task<bool> SharpCap.MultiCaptureProvider.TryCaptureSingleFrameAsync(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)+() => { }
Debug 21:51:55.817914 #1 Single frame thread completed in async Task<bool> SharpCap.MultiCaptureProvider.TryCaptureSingleFrameAsync(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)
Debug 21:51:55.827675 #1 Single frame capture result was Succeeded in async Task<FrameCaptureResult> SharpCap.Models.Camera.CaptureSingleFrameImplNoEventsAsync(string targetName, bool exactFilePath, bool allowPreviousFrame, CancellationToken cancellationToken, IFileNameProvider fileNameProvider, bool showErrorNotifications)
Debug 21:51:55.829929 #1 Started async void SharpCap.Models.SequenceCaptureModel.OnStopCapture() in async void SharpCap.Models.SequenceCaptureModel.OnStopCapture()
Debug 21:51:55.830346 #1 Ended async void SharpCap.Models.SequenceCaptureModel.OnStopCapture() in async void SharpCap.Models.SequenceCaptureModel.OnStopCapture()
Info 21:51:55.830775 #1 StopCapture event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.832219 #1 CaptureFrameComplete event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:56.339555 #1 Captured single frame to SharpCap.ImageProcessing.FrameToSolve for plate solving, Exists?: True in async Task<IFrameToSolve> SharpCap.Models.CurrentCameraFrameToSolveProvider.GetImageToSolveAsFileAsync(CancellationToken cancellationToken)
Info 21:51:56.343088 #1 Field of view calculated as 0.46x0.46 degrees based on FL of 1422.0mm and sensor size of 11.31x11.31mm in SizeF? SharpCap.Base.FieldOfView.CalculateFieldOfView(double? focalLength, SizeF? sensorSize)
Debug 21:51:56.344637 #1 Notification (Status=Warning): Solving frame... Please wait... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.357045 #1 Loading plate solving index PSINDEX;VER=1.2.0.0;SOURCE=GAIADR3;CREATED=2023-11-09T23:16:58.2244789Z;MINGRIDSIZE=0.125;TILES=522, data size = 159.332Mb in new SharpCap.ImageProcessing.QuadAlignment.MultiTileBase(Func<Stream> streamSrc)
Info 21:51:56.357731 #1 Starting blind plate solve in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)
Info 21:51:56.526101 #8 =='.NET TP Worker' (New Thread)
Info 21:51:56.526112 #8 Detected 255 stars, using 100 with settings of Sigma=6, Stretch=Black at 3.9062%, Mid at 10.9997%, White at 99.6094% in List<StarInfo> SharpCap.ImageProcessing.PlateSolving.SharpSolvePlateSolver.DetectStars(DisposableFrame frame, float sigma, PlateSolverLogger logger)
Info 21:51:56.526604 #8 Plate solving : Detected 100 stars. in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.526929 #1 Notification (Status=Warning): Solving: Detected 100 stars. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.533774 #27 =='.NET TP Worker' (New Thread)
Info 21:51:56.533794 #27 Plate solving : Searching at 8.9 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.534129 #1 Notification (Status=Warning): Solving: Searching at 8.9 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.870869 #16 =='.NET TP Worker' (New Thread)
Info 21:51:56.870894 #16 Plate solving : Searching at 9.0 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.871146 #1 Notification (Status=Warning): Solving: Searching at 9.0 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.905138 #8 Plate solving result found : Center at RA=02:34:04.9,Dec=+89:11:02, PixSize=0.507, FrameSize={Width=0.42384094, Height=0.42384094}, Orientation=348.59648560880254, IsFlipped=False, Log10 odds=19.4,
MappingData is TileCenter=RA=00:00:00.0,Dec=+90:00:00, ReferencePosition=RA=02:34:04.9,Dec=+89:11:02, GridScaling=4500, PixelToGrid=Rotation (xAxis):62.83, Rotation (yAxis): 62.87 Flip: False, Scaling: (0.634191,0.634160), Data : 0.2896211,-0.5643971,-6.1271225E-13,-0.5643971,0.28916216,6.0352154E-11 0.2896211, 0.56419665, 1588.5594, -0.5643971, 0.28916216, 2700.6802, -6.1271225E-13, 6.0352154E-11, 1 in void SharpCap.ImageProcessing.QuadAlignment.MultiTileSolver+WorkContext.SetResult(SolveResult result)
Info 21:51:57.143348 #1 Frame center calculated at RA=02:34:04.9,Dec=+89:11:02 (J2000) in bool SharpCap.Models.PixelPositionProviderBase.IsOkToSaveData(RADecPosition frameCenter, IMappingData mappingData)
Info 21:51:57.158290 #1 Frame center converted to JNOW : RA=03:02:13.7,Dec=+89:17:13 in bool SharpCap.Models.PixelPositionProvider.IsOkToSaveData(RADecPosition frameCenter, IMappingData mappingData)
Info 21:51:57.175818 #1 Recording Sky Orientation Mapping from Plate solving at RA=01:47:52.8,Dec=+89:56:17 in void SharpCap.Models.SkyMapping.StorePixelsPerDegreeMapping(Matrix mappingMatrix, string source)
Info 21:51:57.176330 #1 PixelSize is {Width=3.76, Height=3.76}, Side of Pier is EastSideLookingWest, Mapping is Rotation (xAxis):0.17, Rotation (yAxis): -4.42 Flip: False, Scaling: (7064.410156,7120.686035), Data : 7064.38,549.04785,0,549.04785,7099.4873,0, FocalLength calculated at 1534.02, PixelsPerDegree=7120.686 in void SharpCap.Models.SkyMapping.StorePixelsPerDegreeMapping(Matrix mappingMatrix, string source)
Info 21:51:57.176651 #1 Plate solve info with center at RA=03:02:13.7,Dec=+89:17:13 recorded against mount position RA=01:47:52.8,Dec=+89:56:17, mapping data is TileCenter=RA=00:00:00.0,Dec=+90:00:00, ReferencePosition=RA=02:34:04.9,Dec=+89:11:02, GridScaling=4500, PixelToGrid=Rotation (xAxis):62.83, Rotation (yAxis): 62.87 Flip: False, Scaling: (0.634191,0.634160), Data : 0.2896211,-0.5643971,-6.1271225E-13,-0.5643971,0.28916216,6.0352154E-11 0.2896211, 0.56419665, 1588.5594, -0.5643971, 0.28916216, 2700.6802, -6.1271225E-13, 6.0352154E-11, 1, orientation is 348.59648560880254 in void SharpCap.Models.PixelPositionProvider.LogMapping()
Debug 21:51:57.177378 #1 Notification (Status=OK): Plate solve succeeded, currently pointing at RA=02:34:04.9,Dec=+89:11:02 (J2000), field of view is 0.4238x0.4238 degrees, up is 348.6 degrees E of N, focal length is 1528.9mm. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:57.177658 #1 Field solved to RA=02:34:04.9,Dec=+89:11:02, field Size {Width=0.42384094, Height=0.42384094} in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)
Info 21:51:57.180677 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.BlindSolveAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:52:12.087840 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.TransformAction Polar Align executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:52:12.088363 #1 Changing transform from None to Polar Align due to button click on Polar Align in void SharpCap.ViewModels.Actions.TransformAction.ExecuteSync()
Info 21:52:12.088501 #1 Selecting transform Polar Align in void SharpCap.Models.Transforms.set_SelectedTransform(ITransform value)
Info 21:52:12.088666 #1 Requesting creation of Polar Align transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:52:12.139808 #1 Created Polar Align transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:52:12.150562 #1 Loading SharpCap.FrameTransforms.PolarAlignment.PolarAlignControl, MinHeight is 220, ActualHeight is 0 in void SharpCap.New.DockingArea.SetToolContent(Control value)
Info 21:52:12.152343 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.TransformAction Polar Align complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Debug 21:52:16.338147 #1 Notification (Status=Warning): Polar Alignment Initializing - building plate solving index - please wait... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:52:16.338275 #34 =='Image Process Thread' (New Thread)
Info 21:52:16.338282 #34 Reading stars from C:\Program Files\SharpCap 4.1 (64 bit)\npolarstars.txt in IEnumerable<StarRADecMag> SharpCap.ImageProcessing.PlateSolverBase.ReadStars(string starsFilePath)
Info 21:52:16.339897 #34 Read 20130 lines of text in IEnumerable<StarRADecMag> SharpCap.ImageProcessing.PlateSolverBase.ReadStars(string starsFilePath)
Info 21:52:16.370025 #34 Read 20124 stars in IReadOnlyList<IStarInfo> SharpCap.ImageProcessing.PlateSolverBase.LoadStarsImpl(bool southernHemisphere, float pixelsPerDegree)
Info 21:52:16.413886 #34 Index built in 75ms, contains 109108 quads in IQuadIndex SharpCap.ImageProcessing.QuadAlignment.PolarQuadIndexProvider.BuildIndex(bool southernHemisphere, float pixelsPerDegree)
Debug 21:52:16.414247 #1 Notification (Status=OK): Polar Alignment Ready - plate solving index built in 0.1s. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:52:32.837962 #1 Changing output format to FITS files (*.fits) for long exposure based on user preference of fits in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Info 21:52:33.670929 #33 Switching ZWO camera into still mode, exposure is now 2000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:53:17.950188 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:18.048997 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:59.204516 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:59.258402 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsy
Info 21:50:26.383268 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Info 21:50:26.383395 #1 Capture Event : DeviceOpened in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.385007 #1 DeviceOpened event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.390139 #1 Setup camera controls, 51 found in void SharpCap.Models.Controls.SetCaptureControl(CaptureControl cc)
Info 21:50:26.391663 #1 Destroying mount proxy which was a SharpCap.Models.NullProxy for On Camera ST4 in void SharpCap.Models.Mount.CleanupProxy()
Debug 21:50:26.393845 #1 Started bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:50:26.397492 #1 Loading capture profile _autosave (ZWO ASI533MC Pro) in List<string> SharpCap.Models.Camera.LoadCaptureProfileWithErrorInfo(string profileName)
Info 21:50:26.443179 #1 Starting preview on ZWO ASI533MC Pro in void SharpCap.MultiCaptureProvider.StartPreview(PreviewChangeReason reason)
Debug 21:50:26.652075 #1 The WPF render thread has been located for monitoring at thread ID 23472 in ProcessThread SharpCap.Base.ThreadLoadMonitor.FindWPFRenderThread()
Info 21:50:26.652621 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Info 21:50:26.653677 #1 Starting Preview on ZWO ASI533MC Pro, 3008x3008, RGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 21:50:26.659669 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 21:50:26.660077 #1 Started void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Debug 21:50:26.660450 #1 Ended void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Info 21:50:26.664280 #1 Changing output format to AVI files (*.avi) for short exposure based on user preference of avi in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:26.664717 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 21:50:26.666106 #32 =='Grab Thread' (New Thread)
Debug 21:50:26.666214 #32 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 21:50:26.745249 #32 Switching ZWO camera into video mode, exposure is now 50ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:50:26.747241 #33 =='ASI Grab Thread' (New Thread)
Debug 21:50:26.747330 #33 Started void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc() in void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc()
Debug 21:50:26.749049 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 21:50:26.749873 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 21:50:26.750873 #33 Paged memory check based on total memory of 12014Mb, available of 4647Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.751125 #33 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.751225 #33 Assigning 2048Mb to non-pool memory and 2048Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Info 21:50:26.755080 #33 Paged memory check based on total memory of 12014Mb, available of 4647Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.755162 #33 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:50:26.755275 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:26.760610 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls, CancellationToken cancellationToken)
Info 21:50:26.825840 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:50:26.845545 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RGB24.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.846347 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RGB24.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.847364 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:50:26.847969 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Info 21:50:26.855619 #1 Did not find library sensor characteristics at C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC~RGB24.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:50:26.858880 #1 Did not find library sensor characteristics at C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC Pro~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:50:26.874549 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Info 21:50:26.887082 #1 Changing output format to FITS files (*.fits) for long exposure based on user preference of fits in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:26.891301 #1 Ended (Profile applied) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:50:26.928148 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Debug 21:50:27.387858 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 21:50:27.388922 #1 Started new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:50:27.390581 #1 Ended new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:50:27.393550 #1 Started new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Debug 21:50:27.393998 #1 Ended new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Info 21:50:27.419482 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:50:27.425607 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:50:27.435196 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:50:27.448577 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.457644 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.461210 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:50:27.578291 #35 =='ASCOM UI Thread for Focuser' (New Thread)
Info 21:50:27.578318 #35 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 21:50:27.578759 #35 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 21:50:27.579271 #35 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:50:27.579946 #35 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:50:27.580026 #35 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:50:27.601519 #35 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 21:50:27.678523 #35 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 21:50:27.682336 #35 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:50:27.682492 #35 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 21:50:27.684120 #35 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Info 21:50:27.687647 #1 Focuser 'Celestron Focuser Driver' now Conneted:True in void SharpCap.Models.ConnectableHardware<T>.OnConnectedChanged(IApplication app)+() => { }
Debug 21:50:27.692168 #1 Sequencer : Completed : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.693158 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.693948 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.694316 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:27.723660 #1 Started void SharpCap.ViewModels.FocuserViewModel.Initialize() in void SharpCap.ViewModels.FocuserViewModel.Initialize()
Debug 21:50:27.725273 #1 Started void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.728980 #1 Initializing Celestron Focuser Driver, MaxPosition = 42193, MaxChange = 42193, TempCompAvailable = False in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.730687 #37 =='ASCOM UI Thread for Mount' (New Thread)
Info 21:50:27.730703 #37 Connecting to mount : Celestron Telescope Driver in void SharpCap.Models.Mount.set_Connected(bool value)
Info 21:50:27.731689 #37 Creating mount proxy to control Celestron Telescope Driver in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 21:50:27.732649 #37 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:50:27.732729 #37 Creating ASCOM Telescope mount of type ASCOM.Celestron.Telescope ('Celestron Telescope Driver') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Debug 21:50:27.733573 #1 Ended void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 21:50:27.740476 #37 Created ASCOM Telescope mount Celestron StarSense AVX 1.22 (ASCOM Celestron Telescope Driver.), Version=6.1, InterfaceVersion=3, Info=ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron
Scope Type StarSense AVX 1.22 in SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)+() => { }
Debug 21:50:27.740641 #37 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:50:27.997695 #37 The mount claims to be Celestron StarSense AVX 1.22, ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron
Scope Type StarSense AVX 1.22, ASCOM Celestron Telescope Driver., 6.1 in void SharpCap.MountProxy.ASCOM.MountWrapper.DoMountInitialization()
Info 21:50:28.000932 #37 The mount reports an alignment mode of GermanPolar in void SharpCap.MountProxy.ASCOM.MountWrapper.DoMountInitialization()
Info 21:50:28.056141 #37 Available RA tracking rates from mount are Sidereal, Lunar, Solar in IEnumerable<TrackingRate> SharpCap.MountProxy.ASCOM.MountWrapper.GetSupportedTrackingRates()
Warning 21:50:28.330828 #37 Mount time of 2025-06-18T22:09:56.0000000 differs from system time 2025-06-20T02:50:28.2961387Z by -1720.5 minutes in void SharpCap.Models.Mount.CheckMountTime()
Warning 21:50:28.332224 #37 Mount sidereal time of 9.6776812863176 differs from system calculated sidereal time 14.431714704299964 by -285.2 minutes, based on longitude of -94.71861111111112 calculated at 2025-06-20T02:50:28.3314578Z in void SharpCap.Models.Mount.CheckMountTime()
Debug 21:50:28.332270 #1 Notification (Status=Warning): The mount reports a time of 2025-06-18T22:09:56.0000000, which differs from the PC time by -1720.5 minutes. This may cause issues with mount movements. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:50:28.334175 #1 Mount 'Celestron Telescope Driver' now Conneted:True in void SharpCap.Models.ConnectableHardware<T>.OnConnectedChanged(IApplication app)+() => { }
Debug 21:50:28.339040 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 21:50:28.339148 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 21:50:28.357494 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.358266 #1 Slew rates are : 0-4 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.361810 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.361979 #1 Slew rates are : 0-4 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 21:50:28.368570 #1 Testing slew rates for availability : 0.004178074623790057, 0.008356149247580115, 0.01671229849516023, 0.03342459699032046, 0.06684919398064092, 0.13369838796128183, 0.25068447742740346, 0.5013689548548069, 1.000000017408644, 2.0054758194192277, 3.0082137291288413, 4.010951638838455, 8.02190327767691, 20.054758194192274, 40.10951638838455, 50.136895485480686 in (List<AxisRate> slewRates, bool hasFixedRates) SharpCap.MountProxy.ASCOM.MountWrapper.DetermineSlewRates(Tuple<double, double>[] axisRates0, Tuple<double, double>[] axisRates1)
Info 21:50:28.369550 #1 Slew rate of 4.010951638838455 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369649 #1 Slew rate of 8.02190327767691 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369750 #1 Slew rate of 20.054758194192274 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369835 #1 Slew rate of 40.10951638838455 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.369919 #1 Slew rate of 50.136895485480686 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 21:50:28.371397 #1 After testing, the following slew rates are valid : 1x, 0.004 deg/s, 2x, 0.008 deg/s, 4x, 0.017 deg/s, 8x, 0.033 deg/s, 16x, 0.067 deg/s, 32x, 0.134 deg/s, 60.00000000000001x, 0.251 deg/s, 120.00000000000001x, 0.501 deg/s, 239.3447x, 1.000 deg/s, 480.00000000000006x, 2.005 deg/s, 720x, 3.008 deg/s in (List<AxisRate> slewRates, bool hasFixedRates) SharpCap.MountProxy.ASCOM.MountWrapper.DetermineSlewRates(Tuple<double, double>[] axisRates0, Tuple<double, double>[] axisRates1)
Info 21:50:28.371725 #1 Celestron Telescope Driver has 11 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 21:50:28.372744 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 21:50:28.377852 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 21:50:28.385120 #1 Sequencer : Completed : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:28.385459 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:50:28.387686 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:50:28.389108 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:50:29.399540 #1 Notification (Status=Warning): It looks like you are taking long exposure images at a bit depth of 8 bits. You might want to change to a higher bit depth to capture maximum detail in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:50:31.868298 #33 Switching ZWO camera into still mode, exposure is now 8000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Debug 21:50:32.160065 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Debug 21:50:40.745246 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Debug 21:50:40.747084 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Debug 21:50:49.412078 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Debug 21:50:49.414163 #33 Starting ZWO Exposure of 8000ms in bool SharpCap.Cameras.ASI.ASICameraProxy.StartExposure()
Info 21:50:51.217192 #1 Changing output format to AVI files (*.avi) for short exposure based on user preference of avi in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:50:51.551353 #33 Finished ZWO Exposure of 8000ms, gotFrame = True in bool SharpCap.Cameras.ASI.ASICameraProxy.GetFrameData(int timeout, double startingExposure, BufferFrame frame, CancellationToken cancellationToken)
Info 21:50:51.551417 #33 Switching ZWO camera into video mode, exposure is now 1000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:51:54.974688 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.BlindSolveAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Debug 21:51:54.980912 #1 Started async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveExAsync(PlateSolvePurpose frt, CancellationToken cancellationToken, double radius, RADecPosition hintPosition, bool setPixelPositionData) in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveExAsync(PlateSolvePurpose frt, CancellationToken cancellationToken, double radius, RADecPosition hintPosition, bool setPixelPositionData)
Debug 21:51:54.992853 #1 Notification (Status=Warning): Capturing a frame to plate solve... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:54.995371 #1 Not allowing previous frame when capturing for plate solving, since exposure is 1.00s and the mount only reports stable pointing for 0.31s in async Task<FrameToSolve> SharpCap.Models.CurrentCameraFrameToSolveProvider.GetFrameFromCameraAsyncImpl(ICamera camera, CancellationToken cancellationToken)
Info 21:51:54.998812 #1 CapturingFrame event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.000525 #1 StartCapture event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.016838 #4 =='Single Frame Thread' (New Thread)
Debug 21:51:55.016915 #4 Setting capture writer to SharpCap.Base.ForwardingCaptureFileWriter in void SharpCap.Base.BaseImageProvider.SetCaptureWriter(ICaptureFileWriter writer)
Debug 21:51:55.017212 #4 Started void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit) in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Info 21:51:55.126309 #4 Capture frame limit set to 1 when starting capture in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Debug 21:51:55.127736 #4 Ended void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit) in void SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz, int? frameCountLimit)
Debug 21:51:55.709652 #4 Started void SharpCap.Base.BaseImageProvider.BeforeStopCapture() in void SharpCap.Base.BaseImageProvider.BeforeStopCapture()
Debug 21:51:55.710941 #4 Ended void SharpCap.Base.BaseImageProvider.BeforeStopCapture() in void SharpCap.Base.BaseImageProvider.BeforeStopCapture()
Debug 21:51:55.813511 #4 Clearing capture writer because: Capture single frame complete in void SharpCap.Base.BaseImageProvider.ClearCaptureWriter(string reason)
Debug 21:51:55.813607 #4 Ended bool SharpCap.Base.CaptureProviderBase<T>.CaptureSingleFrame(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken) in bool SharpCap.Base.CaptureProviderBase<T>.CaptureSingleFrame(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)
Debug 21:51:55.813752 #4 CaptureSingleFrame returned True in Task<bool> SharpCap.MultiCaptureProvider.TryCaptureSingleFrameAsync(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)+() => { }
Debug 21:51:55.817914 #1 Single frame thread completed in async Task<bool> SharpCap.MultiCaptureProvider.TryCaptureSingleFrameAsync(IFileNameProvider fnp, bool allowPreviousFrame, CancellationToken cancellationToken)
Debug 21:51:55.827675 #1 Single frame capture result was Succeeded in async Task<FrameCaptureResult> SharpCap.Models.Camera.CaptureSingleFrameImplNoEventsAsync(string targetName, bool exactFilePath, bool allowPreviousFrame, CancellationToken cancellationToken, IFileNameProvider fileNameProvider, bool showErrorNotifications)
Debug 21:51:55.829929 #1 Started async void SharpCap.Models.SequenceCaptureModel.OnStopCapture() in async void SharpCap.Models.SequenceCaptureModel.OnStopCapture()
Debug 21:51:55.830346 #1 Ended async void SharpCap.Models.SequenceCaptureModel.OnStopCapture() in async void SharpCap.Models.SequenceCaptureModel.OnStopCapture()
Info 21:51:55.830775 #1 StopCapture event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:55.832219 #1 CaptureFrameComplete event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:51:56.339555 #1 Captured single frame to SharpCap.ImageProcessing.FrameToSolve for plate solving, Exists?: True in async Task<IFrameToSolve> SharpCap.Models.CurrentCameraFrameToSolveProvider.GetImageToSolveAsFileAsync(CancellationToken cancellationToken)
Info 21:51:56.343088 #1 Field of view calculated as 0.46x0.46 degrees based on FL of 1422.0mm and sensor size of 11.31x11.31mm in SizeF? SharpCap.Base.FieldOfView.CalculateFieldOfView(double? focalLength, SizeF? sensorSize)
Debug 21:51:56.344637 #1 Notification (Status=Warning): Solving frame... Please wait... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.357045 #1 Loading plate solving index PSINDEX;VER=1.2.0.0;SOURCE=GAIADR3;CREATED=2023-11-09T23:16:58.2244789Z;MINGRIDSIZE=0.125;TILES=522, data size = 159.332Mb in new SharpCap.ImageProcessing.QuadAlignment.MultiTileBase(Func<Stream> streamSrc)
Info 21:51:56.357731 #1 Starting blind plate solve in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)
Info 21:51:56.526101 #8 =='.NET TP Worker' (New Thread)
Info 21:51:56.526112 #8 Detected 255 stars, using 100 with settings of Sigma=6, Stretch=Black at 3.9062%, Mid at 10.9997%, White at 99.6094% in List<StarInfo> SharpCap.ImageProcessing.PlateSolving.SharpSolvePlateSolver.DetectStars(DisposableFrame frame, float sigma, PlateSolverLogger logger)
Info 21:51:56.526604 #8 Plate solving : Detected 100 stars. in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.526929 #1 Notification (Status=Warning): Solving: Detected 100 stars. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.533774 #27 =='.NET TP Worker' (New Thread)
Info 21:51:56.533794 #27 Plate solving : Searching at 8.9 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.534129 #1 Notification (Status=Warning): Solving: Searching at 8.9 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.870869 #16 =='.NET TP Worker' (New Thread)
Info 21:51:56.870894 #16 Plate solving : Searching at 9.0 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)+(object _, SolveProgressEventArgs a) => { }
Debug 21:51:56.871146 #1 Notification (Status=Warning): Solving: Searching at 9.0 degrees from RA=01:47:50.8,Dec=+89:56:17 using 100 stars from image in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:56.905138 #8 Plate solving result found : Center at RA=02:34:04.9,Dec=+89:11:02, PixSize=0.507, FrameSize={Width=0.42384094, Height=0.42384094}, Orientation=348.59648560880254, IsFlipped=False, Log10 odds=19.4,
MappingData is TileCenter=RA=00:00:00.0,Dec=+90:00:00, ReferencePosition=RA=02:34:04.9,Dec=+89:11:02, GridScaling=4500, PixelToGrid=Rotation (xAxis):62.83, Rotation (yAxis): 62.87 Flip: False, Scaling: (0.634191,0.634160), Data : 0.2896211,-0.5643971,-6.1271225E-13,-0.5643971,0.28916216,6.0352154E-11 0.2896211, 0.56419665, 1588.5594, -0.5643971, 0.28916216, 2700.6802, -6.1271225E-13, 6.0352154E-11, 1 in void SharpCap.ImageProcessing.QuadAlignment.MultiTileSolver+WorkContext.SetResult(SolveResult result)
Info 21:51:57.143348 #1 Frame center calculated at RA=02:34:04.9,Dec=+89:11:02 (J2000) in bool SharpCap.Models.PixelPositionProviderBase.IsOkToSaveData(RADecPosition frameCenter, IMappingData mappingData)
Info 21:51:57.158290 #1 Frame center converted to JNOW : RA=03:02:13.7,Dec=+89:17:13 in bool SharpCap.Models.PixelPositionProvider.IsOkToSaveData(RADecPosition frameCenter, IMappingData mappingData)
Info 21:51:57.175818 #1 Recording Sky Orientation Mapping from Plate solving at RA=01:47:52.8,Dec=+89:56:17 in void SharpCap.Models.SkyMapping.StorePixelsPerDegreeMapping(Matrix mappingMatrix, string source)
Info 21:51:57.176330 #1 PixelSize is {Width=3.76, Height=3.76}, Side of Pier is EastSideLookingWest, Mapping is Rotation (xAxis):0.17, Rotation (yAxis): -4.42 Flip: False, Scaling: (7064.410156,7120.686035), Data : 7064.38,549.04785,0,549.04785,7099.4873,0, FocalLength calculated at 1534.02, PixelsPerDegree=7120.686 in void SharpCap.Models.SkyMapping.StorePixelsPerDegreeMapping(Matrix mappingMatrix, string source)
Info 21:51:57.176651 #1 Plate solve info with center at RA=03:02:13.7,Dec=+89:17:13 recorded against mount position RA=01:47:52.8,Dec=+89:56:17, mapping data is TileCenter=RA=00:00:00.0,Dec=+90:00:00, ReferencePosition=RA=02:34:04.9,Dec=+89:11:02, GridScaling=4500, PixelToGrid=Rotation (xAxis):62.83, Rotation (yAxis): 62.87 Flip: False, Scaling: (0.634191,0.634160), Data : 0.2896211,-0.5643971,-6.1271225E-13,-0.5643971,0.28916216,6.0352154E-11 0.2896211, 0.56419665, 1588.5594, -0.5643971, 0.28916216, 2700.6802, -6.1271225E-13, 6.0352154E-11, 1, orientation is 348.59648560880254 in void SharpCap.Models.PixelPositionProvider.LogMapping()
Debug 21:51:57.177378 #1 Notification (Status=OK): Plate solve succeeded, currently pointing at RA=02:34:04.9,Dec=+89:11:02 (J2000), field of view is 0.4238x0.4238 degrees, up is 348.6 degrees E of N, focal length is 1528.9mm. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:51:57.177658 #1 Field solved to RA=02:34:04.9,Dec=+89:11:02, field Size {Width=0.42384094, Height=0.42384094} in async Task<SolveResults> SharpCap.Models.PlateSolveOnly.SolveImplAsync(CancellationTokenSource tokenSource, IFrameToSolve tmpFile, DateTime time, SizeF? fieldOfView, double radius, bool setPixelPositionData)
Info 21:51:57.180677 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.BlindSolveAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:52:12.087840 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.TransformAction Polar Align executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:52:12.088363 #1 Changing transform from None to Polar Align due to button click on Polar Align in void SharpCap.ViewModels.Actions.TransformAction.ExecuteSync()
Info 21:52:12.088501 #1 Selecting transform Polar Align in void SharpCap.Models.Transforms.set_SelectedTransform(ITransform value)
Info 21:52:12.088666 #1 Requesting creation of Polar Align transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:52:12.139808 #1 Created Polar Align transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:52:12.150562 #1 Loading SharpCap.FrameTransforms.PolarAlignment.PolarAlignControl, MinHeight is 220, ActualHeight is 0 in void SharpCap.New.DockingArea.SetToolContent(Control value)
Info 21:52:12.152343 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.TransformAction Polar Align complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Debug 21:52:16.338147 #1 Notification (Status=Warning): Polar Alignment Initializing - building plate solving index - please wait... in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:52:16.338275 #34 =='Image Process Thread' (New Thread)
Info 21:52:16.338282 #34 Reading stars from C:\Program Files\SharpCap 4.1 (64 bit)\npolarstars.txt in IEnumerable<StarRADecMag> SharpCap.ImageProcessing.PlateSolverBase.ReadStars(string starsFilePath)
Info 21:52:16.339897 #34 Read 20130 lines of text in IEnumerable<StarRADecMag> SharpCap.ImageProcessing.PlateSolverBase.ReadStars(string starsFilePath)
Info 21:52:16.370025 #34 Read 20124 stars in IReadOnlyList<IStarInfo> SharpCap.ImageProcessing.PlateSolverBase.LoadStarsImpl(bool southernHemisphere, float pixelsPerDegree)
Info 21:52:16.413886 #34 Index built in 75ms, contains 109108 quads in IQuadIndex SharpCap.ImageProcessing.QuadAlignment.PolarQuadIndexProvider.BuildIndex(bool southernHemisphere, float pixelsPerDegree)
Debug 21:52:16.414247 #1 Notification (Status=OK): Polar Alignment Ready - plate solving index built in 0.1s. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 21:52:32.837962 #1 Changing output format to FITS files (*.fits) for long exposure based on user preference of fits in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Info 21:52:33.670929 #33 Switching ZWO camera into still mode, exposure is now 2000ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:53:17.950188 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:18.048997 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:59.204516 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:53:59.258402 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsy