SharpCap Forums

Hi,

I'm afraid that's still just a partial log showing a bit of the startup sequence of the software - we can't tell much from it other than you having EQMOD, CPWI and the classic Celestron drivers installed for mount control.

The bit of log of interest is going to have lines starting with 'Error'.

cheers,

Robin

in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 13:13:53.639488 #1 Generating sequencer code for Goto Catalog Target/Co-ordinates status :
GotoCatalogTarget:TargetName=NGC3031 (M81, Bode's Galaxy)|Enabled=True
GotoCoordinates:Name=|Coordinates=|Enabled=False
PauseGuiding:Enabled=False
Refine:Enabled=True
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 13:13:53.646197 #1 The sequence being run is :
SEQUENCE
MOUNT TRACKING Sidereal
TARGETNAME "NGC3031 (M81, Bode's Galaxy)"
MOUNT SET TARGET TO RA=09:55:33.2,Dec=+69:03:55
MOUNT GOTO RA=09:55:33.2,Dec=+69:03:55
WAIT FOR FRAME
MOUNT SOLVEANDSYNC
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 13:13:53.647858 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 13:13:53.648285 #1 Sequencer : Starting : Set mount tracking rate to Sidereal in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Error 13:13:53.672853 #39 Set tracking rate to Sidereal on Celestron Telescope Driver failed : Exception of type 'TargetInvocationException' : Exception has been thrown by the target of an invocation.
Stack Trace: at object System.Reflection.MethodBaseInvoker.InvokeDirectByRefWithFewArgs(object obj, Span<object> copyOfArgs, BindingFlags invokeAttr)
at object System.Reflection.MethodBaseInvoker.InvokeWithOneArg(object obj, BindingFlags invokeAttr, Binder binder, object[] parameters, CultureInfo culture)
at object SharpCap.Base.Utilities.RetryProxy<T>.Invoke(MethodInfo targetMethod, object[] args) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/Utilities/RetryProxy.cs:line 26
at void generatedProxy_2.set_Tracking(TrackingRate)
at void SharpCap.Models.Mount.SetTrackingRate(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap/Models/Mount.cs:line 775
at Task SharpCap.Models.Mount.SetTrackingRateAsync(TrackingRate value, CancellationToken cancellationToken)+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap/Models/Mount.cs:line 797
at async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { } in C:/Documents/Source Code/SharpCap/src/SharpCap/Models/FakeAsyncConnectable.cs:line 201 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 13:13:53.673123 #39 Inner Exception : ASCOM.DriverException: The port is closed.
---> System.InvalidOperationException: The port is closed.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.Telescope.set_Tracking(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Telescope.cs:line 425
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Tracking(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 442
at void SharpCap.MountProxy.ASCOM.MountWrapper.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 777
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 270
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeDirectByRefWithFewArgs(object obj, Span<object> copyOfArgs, BindingFlags invokeAttr) in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 13:13:53.673200 #39 Inner Exception : System.InvalidOperationException: The port is closed. in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 13:13:53.744284 #1 Running step Set mount tracking rate to Sidereal : Exception of type 'TargetInvocationException' : Exception has been thrown by the target of an invocation. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 13:13:53.744439 #1 Inner Exception : ASCOM.DriverException: The port is closed.
---> System.InvalidOperationException: The port is closed.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.Telescope.set_Tracking(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Telescope.cs:line 425
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Tracking(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 442
at void SharpCap.MountProxy.ASCOM.MountWrapper.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 777
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 270
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeDirectByRefWithFewArgs(object obj, Span<object> copyOfArgs, BindingFlags invokeAttr) in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 13:13:53.744552 #1 Inner Exception : System.InvalidOperationException: The port is closed. in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 13:13:53.745202 #1 Sequencer stack at error is: MOUNT TRACKING Sidereal while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 13:13:53.745327 #1 The script being run was :
SEQUENCE
MOUNT TRACKING Sidereal
TARGETNAME "NGC3031 (M81, Bode's Galaxy)"
MOUNT SET TARGET TO RA=09:55:33.2,Dec=+69:03:55
MOUNT GOTO RA=09:55:33.2,Dec=+69:03:55
WAIT FOR FRAME
MOUNT SOLVEANDSYNC
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 13:13:53.745505 #1 Sequencer : Error : 'The port is closed.' while running step Set mount tracking rate to Sidereal in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 13:13:53.746064 #1 Sequencer : Info : 'Exception has been thrown by the target of an invocation.' while running step in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 13:13:53.746742 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Warning 13:13:53.754415 #1 Goto Catalog Target/Co-ordinates failed : Exception of type 'TargetInvocationException' : Exception has been thrown by the target of an invocation. () in async Task<bool> SharpCap.MiniWizards.MiniWizardModel.RunAsync()
Warning 13:13:53.754789 #1 Inner Exception : ASCOM.DriverException: The port is closed.
---> System.InvalidOperationException: The port is closed.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.Telescope.set_Tracking(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Telescope.cs:line 425
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Tracking(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 442
at void SharpCap.MountProxy.ASCOM.MountWrapper.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 777
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.set_Tracking(TrackingRate value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 270
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeDirectByRefWithFewArgs(object obj, Span<object> copyOfArgs, BindingFlags invokeAttr) in async Task<bool> SharpCap.MiniWizards.MiniWizardModel.RunAsync()
Warning 13:13:53.755093 #1 Inner Exception : System.InvalidOperationException: The port is closed. in async Task<bool> SharpCap.MiniWizards.MiniWizardModel.RunAsync()
Debug 13:13:53.755708 #1 Notification (Status=Error): Goto Catalog Target/Co-ordinates failed due to : Exception has been thrown by the target of an invocation. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 13:13:58.773424 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.GotoCoordinateAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 13:14:19.635527 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 13:14:19.695479 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()

Hi,

thanks for posting that - we can now see the actual error message that is stopping things from working...
What that is telling us is that SharpCap is sending a command to the ASCOM driver (to try to set the tracking rate), and the ASCOM driver then tries to send it on to the hardware and discovers that it can't - due to probably a closed serial port. It's as though the ASCOM driver has internally disconnected from the hardware, but is still reporting itself as connected to SharpCap.

Are you trying to use the same ASCOM driver in any other software at the same time (planetarium software, guiding, etc)? That can lead to issues in some cases where the connection cannot be shared.

Some things you can try include:

* Trying the Celestron CPWI application and ASCOM driver for connection instead of the older Celestron Telescope Driver
* Using the Celestron Telescope driver inside the ASCOM 'Device Hub Telescope' - set SharpCap up to talk to the device hub telescope, and in the settings for that, set it up to talk to the Celestron Telescope Driver.

cheers,

Robin

I think I'm closer to a solution than before, but how do I do what you have suggested?

Hi,

* in the SharpCap hardware settings, choose 'Device Hub Telescope' for the mount
* Press the 'Properties' button adjacent to the mount list
* Wait for the 'Device Hub Telescope Setup' window to appear - it may not jump to the foreground, it may just pop up as a new item in the taskbar
* Press the 'Choose' button in Device Hub Telescope Setup and choose your normal ASCOM mount driver from the list
* Press OK several times to close down the various setup/settings windows

You are now using the Device Hub Telescope as a go-between, which may help with the problem.

cheers,

Robin

Thank you so much for the help. I will let you know how it goes.

o 10:41:32.563629 #1 Starting SharpCap v4.1.13332.0 (X64, 64 bit) at 2025-05-30T10:41:32.5408088-05:00 in void SharpCap.Program.Main()
Info 10:41:32.578104 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 10:41:32.613042 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 10:41:32.630612 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 10:41:32.632158 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 10:41:32.669137 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 10:41:32.672638 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 10:41:32.674632 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 10:41:32.860007 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.860184 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.860283 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.865130 #1 Added device enumerator of type AltairViaTTDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.869085 #1 Added device enumerator of type MergedDeviceEnumerator2`2 in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.869178 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.871067 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 10:41:32.876561 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 10:41:32.876666 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.876735 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.877082 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.877164 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.877230 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.877299 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.880512 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.883626 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.886773 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.889927 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.893028 #1 Added device enumerator of type BosmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.893146 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.893209 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.893268 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:32.893330 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 10:41:33.228804 #1 Application object created for SharpCap Pro (v4.1.13332, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 10:41:33.231606 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 10:41:33.232179 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 10:41:33.232953 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 10:41:33.303972 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 10:41:33.348982 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 10:41:33.412414 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 10:41:33.533328 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 10:41:33.535258 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 10:41:33.540274 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 10:41:33.540541 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 10:41:33.540664 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 10:41:33.540753 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 10:41:33.551278 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Info 10:41:33.793184 #12 =='LogInfo Thread' (New Thread)
Info 10:41:33.793278 #12 AvailablePhysicalMemory: 4509Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793351 #12 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793408 #12 CPU: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793462 #12 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793510 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793563 #12 GCMemory: 67Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793613 #12 GraphicsCard: Intel(R) Iris(R) Xe Graphics, v31.0.101.5333 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793671 #12 InstallationId: f44c3133-13bd-4882-98fe-442358e46b2e in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793718 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793764 #12 OSEdition: Microsoft Windows 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793810 #12 OSFullVersion: 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793855 #12 OSProductType: 0x3 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793905 #12 OSVersion: Microsoft Windows NT 10.0.26100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.793968 #12 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS

fo 10:41:33.794413 #12 TimeZone: Central Daylight Time (UTC + -05:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.794464 #12 WindowsMediaVersion: 12.0.26100.4202 in void SharpCap.LogSystemInfo.ThreadProc()
Info 10:41:33.794503 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Debug 10:41:33.855903 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 10:41:33.856306 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 10:41:34.107909 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 10:41:34.237531 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 10:41:34.258236 #25 =='Enumerate Basler Devices' (New Thread)
Info 10:41:34.258346 #25 Basler Pylon not found in PATH, not attempting to discover Basler cameras in Assembly SharpCap.Cameras.Basler.BaslerDeviceEnumerator.TryLoadPylon()
Info 10:41:34.278301 #17 =='.NET TP Worker' (New Thread)
Info 10:41:34.278402 #17 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Error 10:41:34.283210 #25 Enumerating Basler Devices : Exception of type 'FileNotFoundException' : Could not load file or assembly 'Basler.Pylon, Version=1.2.0.0, Culture=neutral, PublicKeyToken=e389355f398382ab'. The system cannot find the file specified.
Stack Trace: at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumerateDevicesImpl()
at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices() in C:/Documents/Source Code/SharpCap/src/SharpCap.Cameras.Basler/BaslerDeviceEnumerator.cs:line 162 in void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices()
Info 10:41:34.747569 #26 =='.NET TP Worker' (New Thread)
Debug 10:41:34.747648 #26 Alpaca discovery completed in 2003ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 10:41:35.262982 #1 BaslerDeviceEnumerator detected no devices in 43.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.263233 #1 QHYDeviceEnumerator detected no devices in 1019.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.263673 #1 Detected Camera: ZWO ASI533MC Pro (ZWO ASI Cameras, 0C1B050509020900) in 42.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.263821 #1 AltairViaTTDeviceEnumerator detected no devices in 13.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.263926 #1 MergedDeviceEnumerator2`2 detected no devices in 19.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264025 #1 SxDeviceEnumerator detected no devices in 6.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264119 #1 PointGreyDeviceEnumerator detected no devices in 336.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264217 #1 AstCamPanDeviceEnumerator detected no devices in 21.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264319 #1 AstroAsisDeviceEnumerator detected no devices in 14.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264428 #1 CelestronDeviceEnumerator detected no devices in 75.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264536 #1 MoravianDeviceEnumerator detected no devices in 15.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264639 #1 AtikDeviceEnumerator detected no devices in 18.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264760 #1 P1DeviceEnumerator detected no devices in 6.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264870 #1 ToupTekDeviceEnumerator detected no devices in 51.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.264976 #1 OgmaDeviceEnumerator detected no devices in 16.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265080 #1 MeadeDeviceEnumerator detected no devices in 12.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265193 #1 MallincamDeviceEnumerator detected no devices in 12.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265309 #1 BosmaDeviceEnumerator detected no devices in 7.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265501 #1 Detected Camera: Integrated Webcam (DirectShow Cameras, ) in 14.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265739 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 510.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265847 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 510.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.265942 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 510.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.266074 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.266196 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.266294 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 10:41:35.266669 #1 Camera scan completed in 1028ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 10:41:35.270950 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 10:41:35.339409 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.340557 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.340692 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.341573 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.379725 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.380138 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.448664 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.449744 #1 Found device Celestron Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.449867 #1 Found device CPWI in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.449970 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450068 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450164 #1 Found device ASCOM Dome Control in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450293 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450383 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450472 #1 Found device Generic Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450560 #1 Found device Pipe diagnostic tool in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450651 #1 Found device POTH Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.450741 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.479833 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.480893 #1 Found device ZWO CAA in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.481059 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.543114 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.543915 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.544034 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.590870 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.591740 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 10:41:35.630992 #1 SharpCap startup complete in 3090ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 10:41:35.640399 #1 Opening default/previous camera on startup. in async Task SharpCap.UI.MainWindowSupport.OnFirstTickAsync()
Info 10:41:35.647768 #1 Changing camera from none to ZWO ASI533MC Pro in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 10:41:35.723971 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.724661 #1 Plate solver detection : AstroTortilla - Not detected in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.725457 #1 Plate solver detection : All Sky Plate Solver - Not found at C:\Users\turtle\AppData\Local\Astrometry in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.725695 #1 Plate solver detection : Ansvr - Not found at C:\Users\turtle\AppData\Local\cygwin_ansvr in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.725879 #1 Plate solver detection : Cygwin/Astrometry based - Not found at C:\cygwin in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.726261 #1 Plate solver detection : Astap (manual location) - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.726487 #1 Plate solver detection : Astap (auto-detect) - Not found at c:\Program Files (x86)\Astap\Astap.exe in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 10:41:35.735783 #1 Capture Event : OpeningDevice in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 10:41:35.737750 #1 OpeningDevice event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 10:41:35.739914 #1 Opening device : ZWO ASI533MC Pro (via ZWO ASI Cameras) in void SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag, ISensorDataProvider sensorDataProvider)
Debug 10:41:35.740540 #1 Started void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Debug 10:41:35.741448 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Info 10:41:35.742289 #1 Started void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 10:41:35.742695 #1 Started void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 10:41:36.156398 #1 Setting ImageProvider CurrentDevice to SharpCap.Base.Reconnection.ReconnectableCameraProxy in void SharpCap.Base.BaseImageProvider.set_CurrentDevice(ICameraProxy value)
Debug 10:41:36.156945 #1 Ended void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 10:41:36.157955 #1 Started CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Debug 10:41:36.158436 #1 Started ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls() in ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls()
Debug 10:41:36.160884 #1 Started ControlMap SharpCap.Cameras.ASI.ASICameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.ASI.ASICameraProxy.GetControlsImpl(IPreviewControl previewControl)
Info 10:41:36.179132 #1 Colour space RAW8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl, ControlSource source)
Info 10:41:36.179273 #1 Colour space RGB24 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl, ControlSource source)
Info 10:41:36.179395 #1 Colour space MONO8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl, ControlSource source)
Info 10:41:36.179512 #1 Colour space RAW16 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl, ControlSource source)
Debug 10:41:36.182143 #1 Ended ControlMap SharpCap.Cameras.ASI.ASICameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.ASI.ASICameraProxy.GetControlsImpl(IPreviewControl previewControl)
Info 10:41:36.290954 #1 Ended CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Info 10:41:36.291268 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Info 10:41:36.291397 #1 Capture Event : DeviceOpened in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 10:41:36.292953 #1 DeviceOpened event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 10:41:36.298128 #1 Setup camera controls, 51 found in void SharpCap.Models.Controls.SetCaptureControl(CaptureControl cc)
Info 10:41:36.299627 #1 Destroying mount proxy which was a SharpCap.Models.NullProxy for On Camera ST4 in void SharpCap.Models.Mount.CleanupProxy()
Debug 10:41:36.301732 #1 Started bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 10:41:36.305588 #1 Loading capture profile _autosave (ZWO ASI533MC Pro) in List<string> SharpCap.Models.Camera.LoadCaptureProfileWithErrorInfo(string profileName)
Info 10:41:36.350761 #1 Starting preview on ZWO ASI533MC Pro in void SharpCap.MultiCaptureProvider.StartPreview(PreviewChangeReason reason)
Info 10:41:36.559048 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Info 10:41:36.560207 #1 Starting Preview on ZWO ASI533MC Pro, 3008x3008, Bayer_RGGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 10:41:36.605526 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 10:41:36.605897 #1 Started void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Debug 10:41:36.606226 #1 Ended void SharpCap.Base.BaseImageProvider.DropPendingFrame() in void SharpCap.Base.BaseImageProvider.DropPendingFrame()
Info 10:41:36.609475 #1 Changing output format to AVI files (*.avi) for short exposure based on user preference of avi in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 10:41:36.610024 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 10:41:36.611324 #30 =='Grab Thread' (New Thread)
Debug 10:41:36.611504 #30 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 10:41:36.649382 #30 Switching ZWO camera into video mode, exposure is now 50ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 10:41:36.651302 #31 =='ASI Grab Thread' (New Thread)
Debug 10:41:36.651391 #31 Started void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc() in void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc()
Info 10:41:36.654448 #31 Paged memory check based on total memory of 12014Mb, available of 4462Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 10:41:36.654689 #31 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 10:41:36.662126 #31 Assigning 2048Mb to non-pool memory and 2048Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Info 10:41:36.662297 #31 Paged memory check based on total memory of 12014Mb, available of 4462Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 10:41:36.662349 #31 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Debug 10:41:36.663123 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 10:41:36.664032 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 10:41:36.666677 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 10:41:36.671142 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls, CancellationToken cancellationToken)
Info 10:41:36.723426 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 10:41:36.740008 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 10:41:36.740662 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Info 10:41:36.766127 #1 Loading library sensor characteristics from C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 10:41:36.766275 #1 Library sensor data loaded for ZWO ASI533MC Pro, RAW8, in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.Load(string cameraType, string sensor, string colourSpace, string cameraMode, bool speculative)
Info 10:41:36.788269 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 10:41:36.797101 #1 Ended (Profile applied) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 10:41:36.822366 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Debug 10:41:37.293005 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 10:41:37.293972 #1 Started new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 10:41:37.295201 #1 Ended new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 10:41:37.297859 #1 Started new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Debug 10:41:37.298325 #1 Ended new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Info 10:41:37.323812 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 10:41:37.329452 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 10:41:37.339342 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 10:41:37.353007 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:37.362607 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:37.366043 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 10:41:37.554266 #33 =='ASCOM UI Thread for Focuser' (New Thread)
Info 10:41:37.554299 #33 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 10:41:37.554862 #33 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 10:41:37.555492 #33 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 10:41:37.556290 #33 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 10:41:37.556413 #33 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 10:41:37.935111 #33 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 10:41:37.938033 #33 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 10:41:37.941839 #33 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 10:41:37.941981 #33 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 10:41:37.943520 #33 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Error 10:41:44.321532 #33 Error connecting to external device. : Exception of type 'DriverException' : Connect to COM4 failed, no Celestron scope detected
Stack Trace: at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 10:41:44.322240 #33 Inner Exception : System.Exception: Connect to COM4 failed, no Celestron scope detected in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 10:41:44.326638 #33 Connecting Focuser : Exception of type 'FailedToConnectException' : Connect to COM4 failed, no Celestron scope detected
Stack Trace: at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 634
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 10:41:44.326747 #33 Inner Exception : ASCOM.DriverException: Connect to COM4 failed, no Celestron scope detected
---> System.Exception: Connect to COM4 failed, no Celestron scope detected
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 10:41:44.326823 #33 Inner Exception : System.Exception: Connect to COM4 failed, no Celestron scope detected in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 10:41:44.341382 #33 Async Connect to Celestron Focuser Driver failed : Exception of type 'FailedToConnectException' : Connect to COM4 failed, no Celestron scope detected () in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 10:41:44.341500 #33 Inner Exception : ASCOM.DriverException: Connect to COM4 failed, no Celestron scope detected
---> System.Exception: Connect to COM4 failed, no Celestron scope detected
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 10:41:44.341592 #33 Inner Exception : System.Exception: Connect to COM4 failed, no Celestron scope detected in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 10:41:44.345154 #1 Running step Connect the currently selected focuser : Exception of type 'FailedToConnectException' : Connect to COM4 failed, no Celestron scope detected () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 10:41:44.345288 #1 Inner Exception : ASCOM.DriverException: Connect to COM4 failed, no Celestron scope detected
---> System.Exception: Connect to COM4 failed, no Celestron scope detected
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 10:41:44.345375 #1 Inner Exception : System.Exception: Connect to COM4 failed, no Celestron scope detected in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 10:41:44.345851 #1 Sequencer stack at error is: FOCUSER CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 10:41:44.346150 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 10:41:44.346272 #1 Sequencer : Error : 'Connect to COM4 failed, no Celestron scope detected' while running step Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:44.346738 #1 Sequencer : Info : 'Connect to COM4 failed, no Celestron scope detected' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 10:41:44.347922 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Connect to COM4 failed, no Celestron scope detected () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 10:41:44.348024 #1 Inner Exception : ASCOM.DriverException: Connect to COM4 failed, no Celestron scope detected
---> System.Exception: Connect to COM4 failed, no Celestron scope detected
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 10:41:44.348113 #1 Inner Exception : System.Exception: Connect to COM4 failed, no Celestron scope detected in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 10:41:44.348248 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Connect to COM4 failed, no Celestron scope detected' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:44.348705 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:44.348983 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:44.349260 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 10:41:44.368308 #35 =='ASCOM UI Thread for Mount' (New Thread)
Info 10:41:44.368320 #35 Connecting to mount : Device Hub Telescope in void SharpCap.Models.Mount.set_Connected(bool value)
Info 10:41:44.369201 #35 Creating mount proxy to control Device Hub Telescope in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 10:41:44.370125 #35 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 10:41:44.370200 #35 Creating ASCOM Telescope mount of type ASCOM.DeviceHub.Telescope ('Device Hub Telescope') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Debug 10:41:44.872459 #35 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 10:41:55.573810 #35 Destroying mount proxy which was a generatedProxy_2 for Device Hub Telescope in void SharpCap.Models.Mount.CleanupProxy()
Debug 10:41:55.574559 #35 Started void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose() in void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose()
Error 10:41:55.579604 #35 Async Connect to Device Hub Telescope failed : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error.
Stack Trace: at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 161
at IMountInterceptionProxy SharpCap.MountProxy.ASCOM.MountWrapper.get_ConnectedMount() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 923
at void SharpCap.MountProxy.ASCOM.MountWrapper.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 408
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 518
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeWithNoArgs(object obj, BindingFlags invokeAttr) in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 10:41:55.580567 #1 Running step Connect the currently selected mount : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 10:41:55.580755 #1 Sequencer stack at error is: MOUNT CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 10:41:55.580885 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 10:41:55.580971 #1 Sequencer : Error : 'Mount failed to connect without reporting an error.' while running step Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:55.581220 #1 Sequencer : Info : 'Mount failed to connect without reporting an error.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 10:41:55.581774 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 10:41:55.581905 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Mount failed to connect without reporting an error.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:55.582168 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 10:41:55.584631 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 10:41:55.585579 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Info 10:42:00.678333 #1 Updating devices menu in void SharpCap.ViewModels.CamerasMenuViewModel.UpdateDevicesMenu()
Info 10:42:17.584715 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 10:42:17.639336 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 10:43:10.199231 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 10:43:10.248173 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 10:45:48.764297 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 10:45:48.784781 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()

Hi,

OK, the error you are getting now is this one
So, it looks like when you are trying to connect, it is configured to use COM4, but is not finding the Celestron hardware on COM4. The things to do at this point would be to check that the COM port is the correct one, check the physical connections to the Celestron mount and to check that the mount is powered on and active.

cheers,

Robin

Its all on com 4. nfo 12:09:01.669928 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 12:09:01.729639 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:01.740951 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:01.747373 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 12:09:01.927050 #34 =='ASCOM UI Thread for Focuser' (New Thread)
Info 12:09:01.927076 #34 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 12:09:01.927525 #34 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 12:09:01.927953 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 12:09:01.928489 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 12:09:01.928571 #34 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 12:09:02.401587 #34 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 12:09:02.404555 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 12:09:02.408319 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 12:09:02.408474 #34 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 12:09:02.410202 #34 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Info 12:09:12.406660 #1 Focuser 'Celestron Focuser Driver' now Conneted:True in void SharpCap.Models.ConnectableHardware<T>.OnConnectedChanged(IApplication app)+() => { }
Debug 12:09:12.412378 #1 Sequencer : Completed : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:12.413980 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:12.414335 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:12.414638 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:12.434289 #1 Started void SharpCap.ViewModels.FocuserViewModel.Initialize() in void SharpCap.ViewModels.FocuserViewModel.Initialize()
Debug 12:09:12.435667 #1 Started void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Debug 12:09:12.443024 #1 Notification (Status=Warning): Warning : Your ASCOM focuser is reporting a maximum position of -1996423168 and a maximum move of -1996423168. This is probably incorrect. Check your ASCOM focuser setup. in void SharpCap.UI.NotificationViewModel.DisplayMessage(NotificationMessage message)
Info 12:09:12.446384 #37 =='ASCOM UI Thread for Mount' (New Thread)
Info 12:09:12.446454 #37 Connecting to mount : Device Hub Telescope in void SharpCap.Models.Mount.set_Connected(bool value)
Info 12:09:12.446422 #1 Initializing Celestron Focuser Driver, MaxPosition = -1996423168, MaxChange = -1996423168, TempCompAvailable = False in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Info 12:09:12.447777 #37 Creating mount proxy to control Device Hub Telescope in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 12:09:12.448911 #37 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 12:09:12.449012 #37 Creating ASCOM Telescope mount of type ASCOM.DeviceHub.Telescope ('Device Hub Telescope') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Debug 12:09:12.451707 #1 Ended void SharpCap.ViewModels.FocuserViewModel.InitializeImpl() in void SharpCap.ViewModels.FocuserViewModel.InitializeImpl()
Debug 12:09:13.043609 #37 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 12:09:27.252527 #37 Destroying mount proxy which was a generatedProxy_2 for Device Hub Telescope in void SharpCap.Models.Mount.CleanupProxy()
Debug 12:09:27.253122 #37 Started void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose() in void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose()
Error 12:09:27.279178 #37 Async Connect to Device Hub Telescope failed : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error.
Stack Trace: at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 161
at IMountInterceptionProxy SharpCap.MountProxy.ASCOM.MountWrapper.get_ConnectedMount() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 923
at void SharpCap.MountProxy.ASCOM.MountWrapper.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 408
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 518
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeWithNoArgs(object obj, BindingFlags invokeAttr) in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 12:09:27.280793 #1 Running step Connect the currently selected mount : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 12:09:27.281264 #1 Sequencer stack at error is: MOUNT CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 12:09:27.281348 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 12:09:27.281463 #1 Sequencer : Error : 'Mount failed to connect without reporting an error.' while running step Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:27.281898 #1 Sequencer : Info : 'Mount failed to connect without reporting an error.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 12:09:27.282577 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Mount failed to connect without reporting an error. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 12:09:27.282699 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Mount failed to connect without reporting an error.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:27.282917 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 12:09:27.285021 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 12:09:27.285693 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Info 12:09:50.588524 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 12:09:50.642348 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task Sha