Page 2 of 2
Re: Matching the brightness/ offset value of lights to darks
Posted: Fri Jul 01, 2022 3:56 pm
by timh
Thanks Chris,
Good point. Indeed maybe use the pedestal option not only where background sky glow is low but also in the case of shorter, lower SNR and noisier exposures which exhibit proportionally higher scatter?
Tim
Re: Matching the brightness/ offset value of lights to darks
Posted: Fri Jul 01, 2022 10:55 pm
by ChrisR Oz
Yes, such as for your DSO “lucky imaging” approach. I will be interested to hear if it helps there.
Cheers, Chris.
Re: Matching the brightness/ offset value of lights to darks
Posted: Tue Jan 17, 2023 6:39 pm
by kaymann
Menno555 wrote: Fri Oct 01, 2021 7:07 pm
Hi Tim
Actually, you can add it. If you use the parameter
{BlackLevel} in the Manual Filename Templates, this will be added to the name.
It's kinda confusing cause BlackLevel, Offset and Brightness are the same things here...
Menno
Actually as I have been experimenting with Brightness (ZWO 533MC Pro) I would love to add this to my filenames as well and would like to know exactly how to do this in SharpCap Settings>Filenames>???
Maybe somebody could paste an example of their entry, and where it is located, as there are five different templates possible.
This would be such a welcome help.
Randall
Re: Matching the brightness/ offset value of lights to darks
Posted: Tue Jan 17, 2023 8:31 pm
by Menno555
Hi Randall
Here somethings that might help you. This all based on the screenshot you see below as example.
When you click the question mark I circled in green, you will see a short list with all the tagnames and formats. These you can use in the filetemplate to make it as you wish. SharpCap will indicate if it recognizes the right tags/formats or not.
First you have to give SharpCap a place where to store the captures. In my case
F:\Captures\SharpCap
Second, check the box for editing filenames manually.
For naming of your captures (stills), the template is the line called
Sequence (Stills) (the second green underlined part).
An example on how it will look on your disk, is the line called
Sequence (the first green underlined part).
So in the screenshot, the template is:
Code: Select all
{Date:S}\{TargetName}\{Time}\{TargetName}_{Index}_{BlackLevel}
And this gives this on your harddisk (this is pure an example, it says for example PNG at the end but with the actual capturing it will save it as the format you choose under the tab
Saving in the Settings.):
Code: Select all
F:\Captures\SharpCap\2023-01-17\M42\21_23_30\M42_00001_25.png
Hope this helps a bit.
Menno

- Clipboard02.jpg (277.16 KiB) Viewed 11468 times
Re: Matching the brightness/ offset value of lights to darks
Posted: Fri Jan 20, 2023 2:24 pm
by kaymann
Both questions answered perfectly - THANK YOU!!!!