New Sequencer Steps

Questions, tips, information and discussions about using the SharpCap Sequencer and Sequence Planner tools
viator
Posts: 12
Joined: Tue Nov 16, 2021 7:41 am

Re: New Sequencer Steps

#11

Post by viator »

admin wrote: Sat Aug 21, 2021 1:19 pm
There is actually a thing called an ASCOM safety monitor driver, and some people make cloud detectors that report via the safety monitor system. Right now, SharpCap doesn't support it, but it would be an interesting thing to add in the future.

cheers,

Robin
Hi,
I'm building a remote-controlled observatory with an opening roof. I use SharpCap with great satisfaction, but a supporting "Safety Monitor" feature would solve the safety issue of operating this observatory, as it is a geometric requirement that the telescope be parked before the roof closes (prevents damage to the telescope).
I found a solution built on an Arduino NANO along with an ASCOM Safety Monitor driver written.

Topic : https://forum.arduino.cc/t/sketch-for-r ... or/1099519

driver and files : https://drive.google.com/file/d/15yfj12 ... sp=sharing

Simply put, it is an optical rain sensor that switches a relay in case of rain, whose status is read by the Arduino. This changes the state from "safe" (= not raining) to "notsafe" (= raining) in the ASCOM "environment".
I would therefore like to ask if it is possible to add support for the above ASCOM safety monitor.
Basically, I think it would be enough if SharpCap could read the "safe"/"notsafe" state from the ASCOM environment and in case of "notsafe" it would be possible to execute a sequence that I can already specify (I have the .bat files to control the opening/closing of the roof).

I apologize if this already has a solution, I'm not proficient in programming and maybe I'm imagining it too simple, as well as for my English.

Thank you
User avatar
admin
Site Admin
Posts: 17576
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: New Sequencer Steps

#12

Post by admin »

Hi,

thanks for the suggestion - I am considering adding telescope dome support in the future to help manage GOTO movements where a dome might be slower to move than the telescope, so adding safety monitor would also be possible. A pre-set 'close down' sequence would be a way of dealing with unsafe conditions - will have to consider that.

cheers,

Robin
Post Reply