Error connecting to 10micron mount

A place to report problems and bugs in SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs

Please also read about Troubleshooting USB Issues before posting.

*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***

Please include the following details in any bug report:

* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
User avatar
admin
Site Admin
Posts: 13174
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Error connecting to 10micron mount

#11

Post by admin »

Hi,

Thanks for the updated log. I'm going to put out a new build this evening that may resolve the issue. If it doesn't please post me a new updated log from the new build.

Thanks, Robin
sunlover
Posts: 11
Joined: Tue Jun 04, 2019 3:28 pm

Re: Error connecting to 10micron mount

#12

Post by sunlover »

Thanks for the new 3.2.6101 build. It did not fix the error. I've attached the new log.

Best regards,
Vitali
Attachments
Log_2019-09-09T20_45_31-18592.log
(40.84 KiB) Downloaded 109 times
User avatar
admin
Site Admin
Posts: 13174
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Error connecting to 10micron mount

#13

Post by admin »

Hi,

Can you share the location where you get your Ascom driver from? I still can't make sense of exactly what is going on as the error message seems to imply that SharpCap is trying to get the connected status of the mount when as far as I can see is actually trying to set it.

Cheers, Robin
sunlover
Posts: 11
Joined: Tue Jun 04, 2019 3:28 pm

Re: Error connecting to 10micron mount

#14

Post by sunlover »

Just to end this thread: There is no fix currently. The workaround is to start another application (for example SkyChart) and connect it to the mount and then connect SharpCap to the mount.
andychess
Posts: 1
Joined: Fri Jul 30, 2021 11:45 am

Re: Error connecting to 10micron mount

#15

Post by andychess »

Hi everyone,

Not sure if this is relevant here, but I am developing a .net application that needs to connect to my 10Micron mount and I am also experiencing problems with the official Ascom driver. Whenever I connect the application freezes. The unofficial driver (called GM2000HPS) works fine.

I already posted a thread on the 10Micron forum.

Hope this helps.

Andy
Post Reply