M27 from Bortle 4 site

A place to share images that you have taken with SharpCap.
Forum rules
Please upload large images to photo sharing sites (flickr, etc) rather than trying to upload them as forum attachments.

Please share the equipment used and if possible camera settings to help others.
Post Reply
User avatar
turfpit
Posts: 869
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

M27 from Bortle 4 site

Post by turfpit » Fri Aug 30, 2019 8:12 pm

Captured at a beach on the Isle of Anglesey, off the North Wales coast. This is a Bortle 4 site as opposed to my home which is Bortle 6.
High res image here https://www.astrobin.com/full/0ffje8/0/

Equipment: Celestron AVX mount, Altair 66ED refractor, Altair 0.8x reducer/flattener, Altair 183C V2.
Capture: 60x60s, 20 darks, 100 bias, 100 flats.
Software: SharpCap 3.2, FITS Liberator (to inspect test frame), Siril (calibration, registration, stacking, crop, colour calibration, green noise removal), Gimp (Curves, Saturation, Contrast).
Capture settings were RAW12, gain 200, black level 30 (black level established by using lowest value which gives centralised histogram for bias frame at gain 200) .

The image from the Bortle 4 site has a much richer star colour and number of stars compared with my Bortle 6 site image here
viewtopic.php?f=16&t=1724. During the registration of frames, Siril was finding in excess of 2,000 stars in the frames.

M27-60x60s.png
M27-60x60s.png (470.32 KiB) Viewed 226 times

The final stack was cropped and re-processed, to show more detail of the nebula:

M27-60x60s-cropped.jpg
M27-60x60s-cropped.jpg (322.42 KiB) Viewed 226 times

Dave

[ALTAIRH183C]
Debayer Preview=On
Output Format=FITS files (*.fits)
Capture Area=5440x3648
Binning=1x1
Pan=0
Tilt=0
Colour Space=RAW12
Fan=On
Temperature=14.3
Black Level=30
USB Speed=1
Auto Exp Target=120
Frame Rate Limit=Maximum
Analogue Gain=200
Exposure=60000
Timestamp Frames=Off
Banding Threshold=35
Banding Suppression=0
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0.005859375
#MidTone Point
Display MidTone Point=0.015859375
#White Point
Display White Point=0.78515625
TimeStamp=2019-08-28T22:45:31.8468576Z
SharpCapVersion=3.2.6086.0

BlackWikkett
Posts: 228
Joined: Sat Jun 23, 2018 8:48 pm
Contact:

Re: M27 from Bortle 4 site

Post by BlackWikkett » Sat Aug 31, 2019 11:24 pm

NIce image Dave, Well Done!

User avatar
turfpit
Posts: 869
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: M27 from Bortle 4 site

Post by turfpit » Sun Sep 01, 2019 1:00 am

Thanks Wickett, I think the darker skies made the difference.

Dave

nexusjeep
Posts: 153
Joined: Thu Oct 18, 2018 3:01 pm

Re: M27 from Bortle 4 site

Post by nexusjeep » Sun Sep 01, 2019 8:49 am

Hi Dave,
Nice shot well done, it is an object that I have looked at but never get round to image perhaps get my ass into gear at some point and give it ago problem is so many targets so few clear nights :D

Cheers
Nick

User avatar
turfpit
Posts: 869
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: M27 from Bortle 4 site

Post by turfpit » Sun Sep 01, 2019 10:26 am

Thanks Nick. Imaging on the beach was rough but worth the effort.

Dave

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest