Hi Everyone,
I was using ASI120MC in conjunction with the All Sky Camera provided to capture the Perseid Meteor Shower event last week. I managed to get about 3000 frames during the show and I am intending to make a timelapse using Lightroom. But there are a lot of hot pixels in the frames, I can't even identify the real stars in my images, then I search up on the internet, found out a method called dark frame subtraction, can eliminate hot pixels or noise efficiently by shooting frames with the lens cap on and with the same settings you use to shoot your images previously. So, my question is, is there a tool in Sharpcap that can remove all hot pixels in the 3000 frames using only one dark frame? Or I can do it in Photoshop? But how? Thanks. Any help or advice will be appreciated.
Debayer Preview=On
Pan=0
Tilt=0
Output Format=PNG files (*.png)
Binning=1
Capture Area=1280x960
Colour Space=RAW8
Temperature=29
Discard Split Frames=Off
High Speed Mode=On
Turbo USB=56(Auto)
Flip=Vert
Frame Rate Limit=Maximum
Gain=52
Exposure=3.957988
Timestamp Frames=Off
White Bal (B)=100(Auto)
White Bal (R)=50(Auto)
Brightness=0
Auto Exp Max Gain=50
Auto Exp Max Exp M S=30000
Auto Exp Target Brightness=100
Mono Bin=Off
Adding Dark Frame to Eliminate Hot Pixels
- admin
- Site Admin
- Posts: 13520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Adding Dark Frame to Eliminate Hot Pixels
Hi,
SharpCap can create dark frames and automatically subtract them for you. Make sure that your dark frame has exactly the same settings (gain, exposure, etc) as your normal frames.
see
https://docs.sharpcap.co.uk/2.9/#!2!Pre-processing
and
https://docs.sharpcap.co.uk/2.9/#Capture
Robin
SharpCap can create dark frames and automatically subtract them for you. Make sure that your dark frame has exactly the same settings (gain, exposure, etc) as your normal frames.
see
https://docs.sharpcap.co.uk/2.9/#!2!Pre-processing
and
https://docs.sharpcap.co.uk/2.9/#Capture
Robin
Re: Adding Dark Frame to Eliminate Hot Pixels
Hi
Can someone list specifically which settings must be maintained in order to utilize captured Dark frames?
I get that exposure and gain are critical but I can"t find anywhere a complete list and I have been unable to apply any dark frames due to some setting change problem that is not identified.
thank you for your help!
Gary
Can someone list specifically which settings must be maintained in order to utilize captured Dark frames?
I get that exposure and gain are critical but I can"t find anywhere a complete list and I have been unable to apply any dark frames due to some setting change problem that is not identified.
thank you for your help!
Gary
- admin
- Site Admin
- Posts: 13520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Adding Dark Frame to Eliminate Hot Pixels
Hi,
The easy answer is don't change anything! In practice anything that changes the output image could mess up dark frame subtraction – that includes
Gain
exposure
offset/brightness/black level
colour balance controls
gamma/contrast
Ideally you want the temperature of the sensor to be the same when taking the dark frames as when taking the images that you are going to use the dark frames against (or as close as possible).
Cheers, Robin
The easy answer is don't change anything! In practice anything that changes the output image could mess up dark frame subtraction – that includes
Gain
exposure
offset/brightness/black level
colour balance controls
gamma/contrast
Ideally you want the temperature of the sensor to be the same when taking the dark frames as when taking the images that you are going to use the dark frames against (or as close as possible).
Cheers, Robin
Re: Adding Dark Frame to Eliminate Hot Pixels
What about the BIN setting?
Roel
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
- admin
- Site Admin
- Posts: 13520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Adding Dark Frame to Eliminate Hot Pixels
Sorry, yes. I should have also included anything that affects the size of the image such as binning or ROI selection. Additionally anything that affects the bit depth of the image or the format of the image (for instance the choice of RGB24, RAW8 or RAW16) must be identical between the dark frames and the like frames.
Cheers, Robin
Cheers, Robin