Hi,
Although I can assign "Ha" to filter position 1 and "Red" to filter position2 etc, etc, I would like to assign a colour and the name to the the display.
space is not black
John
Assign colours to filters
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Assign colours to filters
Hi,
I'm afraid I'm not quite understanding what you are trying to do here – please can you explain in a bit more detail.
Thanks, Robin
I'm afraid I'm not quite understanding what you are trying to do here – please can you explain in a bit more detail.
Thanks, Robin
Re: Assign colours to filters
Hi,
I have set my filter wheel as follows:
1 - Lum
2 - Red
3 - Green
4 - Blue
5 - Ha
6 - Sii
7 - Oiii
Within Sharpcap under "Scope Controls", the filter boxes are labelled and I can select the filter I require. I would like to additionally assign colours to each filter "box" as below. (this makes for easier reading):
For example the filter boxes would have a colour and a name assigned to each box.
1 - White for Lum filter
2 - Red for Red filter
3 - Green for Green filter
4 - Blue for Blue filter
5 - Yellow for Ha Filter
6 - Cyan for Sii filter
7 - Magenta for Oiii filter
I hope this makes sense...
Regards
John
I have set my filter wheel as follows:
1 - Lum
2 - Red
3 - Green
4 - Blue
5 - Ha
6 - Sii
7 - Oiii
Within Sharpcap under "Scope Controls", the filter boxes are labelled and I can select the filter I require. I would like to additionally assign colours to each filter "box" as below. (this makes for easier reading):
For example the filter boxes would have a colour and a name assigned to each box.
1 - White for Lum filter
2 - Red for Red filter
3 - Green for Green filter
4 - Blue for Blue filter
5 - Yellow for Ha Filter
6 - Cyan for Sii filter
7 - Magenta for Oiii filter
I hope this makes sense...
Regards
John
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Assign colours to filters
Okay, that makes sense now.
Let's see if we get any other votes in favour of this sort of feature
Cheers, Robin
Let's see if we get any other votes in favour of this sort of feature
Cheers, Robin