Hi,
I am trying to connect SP to the SSAG PRO
https://www.telescope.com/Orion-StarSho ... 106867.uts
I get this error message:
I use the latest Driver on Orion Website and ASCOM 6.3
SharpCap 3.2.5986.0
Win 10
Thank you for the support
Orion StarShoot Autoguider PRO
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Orion StarShoot Autoguider PRO
Hi,
That particular error means that the Ascom driver is not properly installed. The first thing to try would be to try uninstalling and then reinstalling the Orion Ascom driver to see if that helps.
Cheers, Robin.
That particular error means that the Ascom driver is not properly installed. The first thing to try would be to try uninstalling and then reinstalling the Orion Ascom driver to see if that helps.
Cheers, Robin.
-
- Posts: 19
- Joined: Mon May 06, 2019 9:22 am
Re: Orion StarShoot Autoguider PRO
Hi, I solved by installing SharpCap 32bit instead of 64bit
It works now with 32bit version!
It works now with 32bit version!
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Orion StarShoot Autoguider PRO
Ah,
That kind of makes sense – what it means is that the Ascom driver for the Orion camera is only a 32 bit driver. Some manufacturers provide both 32 and 64-bit drivers, some only provide 32.
Cheers, Robin
That kind of makes sense – what it means is that the Ascom driver for the Orion camera is only a 32 bit driver. Some manufacturers provide both 32 and 64-bit drivers, some only provide 32.
Cheers, Robin