Hi Robin,
I updated my Sharpcap pro the other day from 3.1 to 3.2
The gain control for the QHY5iii 174M is fixed at 10, it may reduce to zero, I can see a change in histogram but the number is fixed at 10. Over writing makes no difference either. I cannot adjust the up from 10.
The version I'm using is 3.2.5982 (laptop & PC)
The gain control works fine in v3.1.5220 (laptop) & an earlier 3.1.5143 version on my PC.
QHY driver is QHY5iiiSeriesDriver190327win10, on both setups & both are running under win10 64b
Log attached.
Any help appreciated.
Al the best
Martin
QHY5iii 174M Gain control not working in v3.2
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
-
- Posts: 3
- Joined: Sat Apr 13, 2019 2:21 pm
QHY5iii 174M Gain control not working in v3.2
- Attachments
-
- Log_2019-04-13T12_52_47-15472.log
- (100.81 KiB) Downloaded 97 times
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY5iii 174M Gain control not working in v3.2
Hi,
Thanks for the bug report – it looks like the latest qhy SDK is giving an error when trying to set the gain on that camera (fortunately I have a camera of the same model to test with). It seems that the adjustment the gain is actually applied regardless of the fact that an error is generated – that means that the image brighten or dims but some internal bookkeeping in SharpCap doesn't happen meaning that the slider doesn't move correctly.
I have made some tweaks to the code so that the bookkeeping happens regardless of the error and everything now seems to work correctly. Please try the very latest version from the downloads page (3.2 .5986)
Cheers, Robin
Thanks for the bug report – it looks like the latest qhy SDK is giving an error when trying to set the gain on that camera (fortunately I have a camera of the same model to test with). It seems that the adjustment the gain is actually applied regardless of the fact that an error is generated – that means that the image brighten or dims but some internal bookkeeping in SharpCap doesn't happen meaning that the slider doesn't move correctly.
I have made some tweaks to the code so that the bookkeeping happens regardless of the error and everything now seems to work correctly. Please try the very latest version from the downloads page (3.2 .5986)
Cheers, Robin
-
- Posts: 3
- Joined: Sat Apr 13, 2019 2:21 pm
Re: QHY5iii 174M Gain control not working in v3.2
Thanks Robin,
I'll give it a go, & let you know.
Cheers
I'll give it a go, & let you know.
Cheers
-
- Posts: 3
- Joined: Sat Apr 13, 2019 2:21 pm
Re: QHY5iii 174M Gain control not working in v3.2
Hi again Robin,
That's fixed it thanks very much.
And thanks for your effort & support.
All the best
Martin
That's fixed it thanks very much.
And thanks for your effort & support.
All the best
Martin