Practise plate solving
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Practise plate solving
How can I practice plate solving using SharpCap test camera 1 (deep sky) or one my recent star images? I need a few dummy runs to feel confident before actual use. Being in the southern hemisphere aligning the EQ mount to the celestial south pole can at times be difficult but if I can use plate solving after a rough alignment using just true south and the latitude, could get me around this error. Can someone point me in the right direction with practice?
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Practise plate solving
Hi,
you can use the ASCOM Simulator mount to do this - basically all you need to do is select the simulator mount, connect it and then adjust the position to be within 15 degrees (RA & Dec) of the image being used in the test camera before trying to plate solve.
cheers,
Robin
you can use the ASCOM Simulator mount to do this - basically all you need to do is select the simulator mount, connect it and then adjust the position to be within 15 degrees (RA & Dec) of the image being used in the test camera before trying to plate solve.
cheers,
Robin
Re: Practise plate solving
Hi Robin,
I'm still stuck on base 1. How do I connect to Telescope Simulator for.NET (selected in SharpCap: File, settings, hardware, mounts) then to plate solve when getting the following statement "plate solve failed. Only one star etc".
Still need directions to proceed further.
I'm still stuck on base 1. How do I connect to Telescope Simulator for.NET (selected in SharpCap: File, settings, hardware, mounts) then to plate solve when getting the following statement "plate solve failed. Only one star etc".
Still need directions to proceed further.
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Practise plate solving
Hi Daryl,
configuring a mount - https://docs.sharpcap.co.uk/3.2/#Hardware%20Tab - please make sure you have ASCOM platform installed.
Make sure the connected option is ticked once camera started - https://docs.sharpcap.co.uk/3.2/#Mount%20Control
If not enough stars deteced, try lowering the sigma option in the plate solve settings - https://docs.sharpcap.co.uk/3.2/#Plate%20Solving%20Tab
Hope this helps get you going,
Robin
configuring a mount - https://docs.sharpcap.co.uk/3.2/#Hardware%20Tab - please make sure you have ASCOM platform installed.
Make sure the connected option is ticked once camera started - https://docs.sharpcap.co.uk/3.2/#Mount%20Control
If not enough stars deteced, try lowering the sigma option in the plate solve settings - https://docs.sharpcap.co.uk/3.2/#Plate%20Solving%20Tab
Hope this helps get you going,
Robin