Conesharp Questions
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Conesharp Questions
I assume that when using Conesharp I at no point use any syncs. Also, when centering each star, do I use the eqmod controls? Or do I undo the clutches and center manually. Apart from the final step of course, where I'm centering using the dovetail bolts to remove the error.
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Conesharp Questions
Hi,
it should all be done with EQMOD controls. There are no syncs and in fact you must disable any multipoint sync mapping in EQMOD otherwise that will hide the very error that ConeSharp is trying to measure.
cheers,
Robin
it should all be done with EQMOD controls. There are no syncs and in fact you must disable any multipoint sync mapping in EQMOD otherwise that will hide the very error that ConeSharp is trying to measure.
cheers,
Robin
Re: Conesharp Questions
Thanks, just need a clear sky now.