HI Robin
Just received my WD-20e mount and working through operation via SC.
I'm running SharpCapInstall-4.1.14310.0-64bit
I can Connect OK to WD-20e via Onstep Telescope hardware setting.
In Telesccope Hardware controls I can Slew mount , PARK-UNpark, enable/disable Tracking
But I don't have a HOME button.
The mount does have HOME switches and the HOME command functions in APT.
The mount also has a configurable PARK position, which I set to a different location than HOME.
Would you be able to configure a HOME button for the Onstep Telescope setup?
Thanks
Steve
No HOME button for WD-20e mount
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs