New software tool for collimating with tri-bahtinov mask

Anything that doesn't fit into any of the other forums
Post Reply
User avatar
Menno555
Posts: 1186
Joined: Mon Apr 20, 2020 2:19 pm
Location: The Netherlands
Contact:

New software tool for collimating with tri-bahtinov mask

#1

Post by Menno555 »

I just found a new, great tool for collimating with a Tri-Bahtinov mask. The tool is been there since last year, but just discovered it now.
General info, discussion and download location on https://www.cloudynights.com/topic/8788 ... -software/

It can be used for focusing with a Bahtinov mask and for focusing and/or collimating with a Tri-Bahtinov mask.
It has some very cool features like an assistant too to see which collimating screws have to be adjusted, which way and how much.
I found it very easy to use and noticed that I could use it in the way that worked for me. So it's versatile in use.
And no, this is no advertisement ;) It's just something I know rather a lot of people were/are looking for.

This is my final result.
Clipboard_06-24-2024_01.jpg
Clipboard_06-24-2024_01.jpg (192 KiB) Viewed 3530 times
Meade LX200 8" f/10 ACF OTA / Ioptron CEM25EC / Zwo ASI071MC Pro / Zwo ASI482MC
Jeddymo51
Posts: 1
Joined: Thu May 07, 2020 2:05 pm

Re: New software tool for collimating with tri-bahtinov mask

#2

Post by Jeddymo51 »

Just downloaded SkyCal and the instructions. Very anxious to use it once the clouds part. Must use my PC laptop with windows. So I will use Sharpcap to create the star image. Not really familiar with Sharpcap. Is the star image a "live" image?
User avatar
Menno555
Posts: 1186
Joined: Mon Apr 20, 2020 2:19 pm
Location: The Netherlands
Contact:

Re: New software tool for collimating with tri-bahtinov mask

#3

Post by Menno555 »

Hello and welcome

The star image is a captured image by SharpCap (or what ever capture program) and that capture is fed into the collimaton program. I presume that this still is the case with the latest version of it. Haven't used it for a while now :)

Menno
Meade LX200 8" f/10 ACF OTA / Ioptron CEM25EC / Zwo ASI071MC Pro / Zwo ASI482MC
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: New software tool for collimating with tri-bahtinov mask

#4

Post by Gfischer »

I use a tri mask for collimating my 12” dob. I tried the sky cal program it worked well but the problem I found was the numbers calculated kept changing. Probably my seeing conditions. I just use the mask alone. If you orient mask where the edges of each section aligns with the primary screws drawn with an imaginary line up the tube aligned with the optical axis. When adjusting screws the star will move at right angles to the set of line images you are adjusting. Only takes a few tries to get everything centered. I find tri masks better than laser or Cheshire tools.
User avatar
admin
Site Admin
Posts: 17574
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: New software tool for collimating with tri-bahtinov mask

#5

Post by admin »

Hi,

I've used SkyCal now with great success to collimate my classical cassegrain. As noted, the numbers tend to jump around a bit when the seeing isn't steady. When that happens I tend to watch out for the range of variation - if it is wobbling between +0.3 and -0.3 then that is pretty much right, but between +0.5 and -0.1 indicates that more tweaking is required.

Basically you get the star live view working in SharpCap and then SkyCal works by grabbing the image that SharpCap is showing (like doing a screen capture several times per second) and then processing that grabbed image.

cheers,

Robin
kaymann
Posts: 297
Joined: Thu Jun 16, 2022 2:59 pm
Location: https://azkayfes.blogspot.com/

Re: New software tool for collimating with tri-bahtinov mask

#6

Post by kaymann »

It is all I use now and it continues to be developed - I saw an update this year. Very accurate I really appreciate this tool!
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: New software tool for collimating with tri-bahtinov mask

#7

Post by turfpit »

Menno

I recently purchased a Tri-Bahtinov mask with the intent of checking the collimation of my Celestron 8" SCT (which is fitted with Bob's Knobs). At first try, the pattern was aligned in 4 directions but slightly out in 2 directions but the image was unstable. Tried another night and same problem with 2 of the directions wobbling between perfect and slightly out. Both times I backed off making any adjustments as I felt I could make things worse. The atmosphere will be better over the coming months.

Thanks for the link to the software it looks like it will be useful.

Dave
User avatar
Menno555
Posts: 1186
Joined: Mon Apr 20, 2020 2:19 pm
Location: The Netherlands
Contact:

Re: New software tool for collimating with tri-bahtinov mask

#8

Post by Menno555 »

turfpit wrote: Wed Apr 15, 2026 10:57 am ...

Thanks for the link to the software it looks like it will be useful.

Dave
Hi Dave

I recognise what you describe: here in the city it's almost never perfectly stable. But I got good and more stable views when I did the collimaton with an IR-Pass filter: Near IR tends to have less trouble with air disturbance. The wavelength stays more stable (or however it's called :) ).

Menno
Meade LX200 8" f/10 ACF OTA / Ioptron CEM25EC / Zwo ASI071MC Pro / Zwo ASI482MC
User avatar
turfpit
Posts: 2279
Joined: Mon Feb 13, 2017 8:13 pm
Location: UK
Contact:

Re: New software tool for collimating with tri-bahtinov mask

#9

Post by turfpit »

Thanks Menno, I will try the IR filter.

Dave
Post Reply