Field of view for PA?
Field of view for PA?
Hello, in the instructions for polar alignment it says "A field of view in the camera of between 1 degree and about 2.5 degrees". My scope is 500mm focal length and I am using a full frame camera so I calculated it to be 4 degrees. Is this too far off? Or is it talking about using a guidescope? Thanks. -Derryl
- admin
- Site Admin
- Posts: 17573
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Field of view for PA?
Hi,
optimal is about 1 degree to 2.5, but it should work from about 0.5 degrees up to 5 or 6 degrees (or perhaps even a bit more). Fortunately, if you have too big a field of view, it's really easy to fix - just put your camera into ROI mode to reduce the FOV that the polar alignment is working with down to maybe 2x2 degrees. It's obviously much harder if your setup has too small a FOV as in that case you either need a bigger sensor camera or a shorter focal length telescope (or perhaps a reducer).
cheers,
Robin
optimal is about 1 degree to 2.5, but it should work from about 0.5 degrees up to 5 or 6 degrees (or perhaps even a bit more). Fortunately, if you have too big a field of view, it's really easy to fix - just put your camera into ROI mode to reduce the FOV that the polar alignment is working with down to maybe 2x2 degrees. It's obviously much harder if your setup has too small a FOV as in that case you either need a bigger sensor camera or a shorter focal length telescope (or perhaps a reducer).
cheers,
Robin