Onstep.......

Anything that doesn't fit into any of the other forums
Post Reply
paolo
Posts: 28
Joined: Fri Apr 09, 2021 6:26 pm

Onstep.......

#1

Post by paolo »

Salve a tutti, hoo comprato di recente una montatura artigianale con frizioni, a corredo mi hanno fornito Onstep Goto Controller V5 Pro, peer la gestione della montatura, sono riuscito a controllare con il telefono mi sembra bene...., però sono abituato a controllare le altre montature e utilizzatori vari con sharpcap e mi trovo molto bene, ho provato con Onstep ma non sono riuscito a trovare il modo......., mi dicono che servono i Drive ma non so dove cercare e se esistono.......
Grazie
Cordiali Saluti
paolo
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Onstep.......

#2

Post by admin »

Hi,

you will need to download and install the ASCOM driver for your Onstep hardware - probably from this web site : http://stellarjourney.com/main/onstep-a ... -software/

On top of that, you will need to have the ASCOM platform installed, and if your hardware connects to the PC via USB then you *might* need a Windows system driver for the USB device to make it work properly.

cheers,

Robin
paolo
Posts: 28
Joined: Fri Apr 09, 2021 6:26 pm

Re: Onstep.......

#3

Post by paolo »

Salve Robin, si anche io sono capitato su questo sito, ho preso da qui i Drive, sono riuscito a connettere Schar Cap, N.I.N.A., Stellarium,
Cmq grazie infinite per la risposta, approfitto per chiedere se si potesse correggere il tasto " Salva " magari con un colore rosso o verde e scritto salva o salvato......... perche non si capisce mai se si è salvato oppure no.........
Grazie di nuovo
Cordiali Saluti
Paolo
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Onstep.......

#4

Post by admin »

Hi,

which save button are you thinking of?

cheers,

Robin
paolo
Posts: 28
Joined: Fri Apr 09, 2021 6:26 pm

Re: Onstep.......

#5

Post by paolo »

Salve Robin
Mi riferivo al pulsante Salva in Sharp Cap......
Grazie
Saluti
Paolo
Attachments
20260221_184321.jpg
20260221_184321.jpg (571.36 KiB) Viewed 491 times
User avatar
admin
Site Admin
Posts: 17573
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Onstep.......

#6

Post by admin »

Hi,

if you have clicked 'save' and you don't get an error then it has saved. This is fairly standard that you show an error when something doesn't work as requested rather than a confirmation when it does.

Have you had problems where you thought you had saved and hadn't actually saved?

thanks,

Robin
Post Reply