Bad frames in Jupiter imaging Using ToupTek G3M678C

A place to report problems and bugs in SharpCap
Forum rules
‍

If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs

Please also read about Troubleshooting USB Issues before posting.

*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***

Please include the following details in any bug report:

* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
Post Reply
sku
Posts: 1
Joined: Sat Dec 13, 2025 9:14 am

Bad frames in Jupiter imaging Using ToupTek G3M678C

#1

Post by sku »

Hi, I'm taking some planetary images of Jupiter with a ToupTek G3M678C on a C9.25, and I'm getting some bad frames in the SER recordings.
In particular, during yesterday's session, I was using RAW8 with a ROI of 640x640, 4 ms at gain 400, achieving about 100 FPS on my Mele Quieter 4C (N150, 32GB RAM, 512GB fast storage). This problem also appeared in another session using RAW16. SharpCap Pro version 4.1.13970.0 - 12/1/2025.

Basically, I see random frames with a horizontal bar and partially overexposed in the raw footage. I notice around 10 of those frames over a 90-second video, appearing at random places (non-consecutive). I'm wondering how to solve this issue and whether it's related to the camera or SharpCap. Thank you.
frame_b_issue
frame_b_issue
frame_b_issue.png (358.11 KiB) Viewed 501 times
Attachments
frame_c_after_issue
frame_c_after_issue
frame_c_after_issue.png (380.21 KiB) Viewed 501 times
frame_a_before_issue
frame_a_before_issue
frame_a_before_issue.png (378.26 KiB) Viewed 501 times
Top
User avatar
admin
Site Admin
Posts: 17510
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:
Contact admin

Re: Bad frames in Jupiter imaging Using ToupTek G3M678C

#2

Post by admin »

Hi,

I think this is probably a glitch coming from the camera itself rather than anything introduced on the software side. There's not really anything in SharpCap that could do this kind of thing to one frame in several hundred and leave the others fine - particularly if you are not using any of the 'preprocessing' options on the right (those do modify frame data, but usually in a consistent way).

I think the first thing to do would be to try different - lower - values for the USB Speed setting. Although that may reduce the overall maximum frame rate somewhat it does tend to improve stability in general and can help get rid of issues like this. If you can shorted/simplify the USB connection back to the PC that might also help (remove hubs/extensions - have a single cable of the minimum workable length from the camera straight back to the PC).

If you can find a slightly lower value that gets rid of the problem without too much loss of frame rate then you are fine. Otherwise, it would be worth updating the toupcam.dll file to the latest version (if/when the next version is released by ToupTek - SharpCap currently has the latest available as far as I am aware).

cheers,

Robin
Top
Post Reply

Return to “Bug Reports”