Exception error
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
kaymann
- Posts: 243
- Joined: Thu Jun 16, 2022 2:59 pm
- Location: https://azkayfes.blogspot.com/
Re: Exception error
Are you using a USB to USB controller or is it a Serial to USB controller. If it is the latter then I have some suggestions...
Re: Exception error
Hi Robin,
Well the last message to me really helped. When I went to the ASCOM Hub page, I found that my Telescope State was Not Connected. When I Connected Telescope It connected. When I tried to move the mount it was going very very slow. I almost could not tell if it was moving, Then I bumped the speed to 3 deg/sec it was moving and I could see it move!!!!!! Victory for us. But I noticed that when I Xed out of everything and went back into ASCOM Hub, the telescope showed Not Connected again. Can you help with that?
Well the last message to me really helped. When I went to the ASCOM Hub page, I found that my Telescope State was Not Connected. When I Connected Telescope It connected. When I tried to move the mount it was going very very slow. I almost could not tell if it was moving, Then I bumped the speed to 3 deg/sec it was moving and I could see it move!!!!!! Victory for us. But I noticed that when I Xed out of everything and went back into ASCOM Hub, the telescope showed Not Connected again. Can you help with that?
-
admin
- Site Admin
- Posts: 15520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Exception error
Hi,
glad to hear that you got the telescope moving!
It's standard that the software will start up with the telescope in not connected mode and that you need to tick the 'connected' box each time. Most people consider the alternative is worse (if it auto connects, but you start the software without the hardware attached/powered then it will wait for many seconds while trying to find the hardware and then give an error).
In SharpCap you also need to tick the 'Connected' box - if you do that in SharpCap you should see the connected box in ASCOM hub become ticked too, I think, or at least when you tick 'Connected' in SharpCap, the ASCOM hub should pop up and connect straight away.
cheers,
Robin
glad to hear that you got the telescope moving!
It's standard that the software will start up with the telescope in not connected mode and that you need to tick the 'connected' box each time. Most people consider the alternative is worse (if it auto connects, but you start the software without the hardware attached/powered then it will wait for many seconds while trying to find the hardware and then give an error).
In SharpCap you also need to tick the 'Connected' box - if you do that in SharpCap you should see the connected box in ASCOM hub become ticked too, I think, or at least when you tick 'Connected' in SharpCap, the ASCOM hub should pop up and connect straight away.
cheers,
Robin
Re: Exception error
Does SharpCap need a polar alignment before it will Go To Target?
Darrell
Darrell
-
admin
- Site Admin
- Posts: 15520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Exception error
Hi Darrell,
if you want it to go to the right place in the sky then the mount needs to be polar aligned (and you also would need to do some sort of handset alignment too after turning on the mount).
If you just want to test that the mount moves around in response to the software sending commands then no need to polar align - just set the mount up any old way around, go through the handset alignment (set the right date/time, but just click OK or align when prompted for each alignment star) and then the mount should spin around happily when asked (but obviously be pointing in the wrong direction relative to the real sky).
cheers,
Robin
if you want it to go to the right place in the sky then the mount needs to be polar aligned (and you also would need to do some sort of handset alignment too after turning on the mount).
If you just want to test that the mount moves around in response to the software sending commands then no need to polar align - just set the mount up any old way around, go through the handset alignment (set the right date/time, but just click OK or align when prompted for each alignment star) and then the mount should spin around happily when asked (but obviously be pointing in the wrong direction relative to the real sky).
cheers,
Robin
Re: Exception error
1:30.613215 #1 Starting SharpCap v4.1.13332.0 (X64, 64 bit) at 2025-06-17T21:21:30.5921762-05:00 in void SharpCap.Program.Main()
Info 21:21:30.627243 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 21:21:30.658584 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:30.675253 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 21:21:30.676763 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 21:21:30.728754 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 21:21:30.735759 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:30.740974 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:31.034056 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.034407 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.034707 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.039086 #1 Added device enumerator of type AltairViaTTDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.042831 #1 Added device enumerator of type MergedDeviceEnumerator2`2 in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.043043 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.045053 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 21:21:31.053831 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 21:21:31.053940 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.054022 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.054673 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055117 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055543 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055915 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.059126 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.062202 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.065042 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.067889 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071016 #1 Added device enumerator of type BosmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071509 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071587 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071644 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.072102 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.440739 #1 Application object created for SharpCap Pro (v4.1.13332, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 21:21:31.443858 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:21:31.444469 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 21:21:31.445463 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 21:21:31.548804 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:21:31.634141 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 21:21:31.729290 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.849851 #12 =='LogInfo Thread' (New Thread)
Info 21:21:31.849963 #12 AvailablePhysicalMemory: 4403Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850080 #12 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850143 #12 CPU: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850194 #12 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850247 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850294 #12 GCMemory: 58Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850343 #12 GraphicsCard: Intel(R) Iris(R) Xe Graphics, v31.0.101.5333 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850415 #12 InstallationId: f44c3133-13bd-4882-98fe-442358e46b2e in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850469 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850522 #12 OSEdition: Microsoft Windows 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850568 #12 OSFullVersion: 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850621 #12 OSProductType: 0x3 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850669 #12 OSVersion: Microsoft Windows NT 10.0.26100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850728 #12 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Users\turtle\AppData\Local\Microsoft\WindowsApps in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850780 #12 ProcessMemory: 117Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850835 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850910 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850964 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851012 #12 SharpCapVersion: 4.1.13332.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851064 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851121 #12 SystemMemory: 12014Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851181 #12 TimeUTC: 2025-06-18T02:21:30.7411122Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851236 #12 TimeZone: Central Daylight Time (UTC + -05:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851284 #12 WindowsMediaVersion: 12.0.26100.4202 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851400 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.906007 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:21:31.908071 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:21:31.916608 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.916904 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.917054 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 21:21:31.917152 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.928391 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Debug 21:21:32.302242 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:21:32.302784 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:21:32.581871 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:21:32.706971 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:21:32.743035 #28 =='Enumerate Basler Devices' (New Thread)
Info 21:21:32.743137 #28 Basler Pylon not found in PATH, not attempting to discover Basler cameras in Assembly SharpCap.Cameras.Basler.BaslerDeviceEnumerator.TryLoadPylon()
Error 21:21:32.843495 #28 Enumerating Basler Devices : Exception of type 'FileNotFoundException' : Could not load file or assembly 'Basler.Pylon, Version=1.2.0.0, Culture=neutral, PublicKeyToken=e389355f398382ab'. The system cannot find the file specified.
Stack Trace: at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumerateDevicesImpl()
at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices() in C:/Documents/Source Code/SharpCap/src/SharpCap.Cameras.Basler/BaslerDeviceEnumerator.cs:line 162 in void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices()
Info 21:21:32.848350 #29 =='.NET TP Worker' (New Thread)
Info 21:21:32.848451 #29 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 21:21:32.922846 #13 =='.NET TP Worker' (New Thread)
Debug 21:21:32.922872 #13 Alpaca discovery completed in 2004ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 21:21:33.757017 #1 BaslerDeviceEnumerator detected no devices in 136.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757263 #1 QHYDeviceEnumerator detected no devices in 1044.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757694 #1 Detected Camera: ZWO ASI533MC Pro (ZWO ASI Cameras, 0C1B050509020900) in 72.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757834 #1 AltairViaTTDeviceEnumerator detected no devices in 24.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757931 #1 MergedDeviceEnumerator2`2 detected no devices in 48.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758024 #1 SxDeviceEnumerator detected no devices in 5.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758115 #1 PointGreyDeviceEnumerator detected no devices in 414.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758206 #1 AstCamPanDeviceEnumerator detected no devices in 45.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758303 #1 AstroAsisDeviceEnumerator detected no devices in 41.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758417 #1 CelestronDeviceEnumerator detected no devices in 178.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758532 #1 MoravianDeviceEnumerator detected no devices in 75.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758638 #1 AtikDeviceEnumerator detected no devices in 97.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758744 #1 P1DeviceEnumerator detected no devices in 14.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758849 #1 ToupTekDeviceEnumerator detected no devices in 96.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758957 #1 OgmaDeviceEnumerator detected no devices in 65.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759066 #1 MeadeDeviceEnumerator detected no devices in 59.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759170 #1 MallincamDeviceEnumerator detected no devices in 19.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759302 #1 BosmaDeviceEnumerator detected no devices in 18.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759490 #1 Detected Camera: Integrated Webcam (DirectShow Cameras, ) in 20.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759624 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759723 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759815 #1 Detected Camera: ASCOM JustAHub Camera (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759905 #1 Detected Camera: ASCOM OmniSim Camera (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759997 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760119 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760239 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760335 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760732 #1 Camera scan completed in 1053ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:21:33.765936 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:21:33.835130 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836314 #1 Found device ASCOM JustAHub Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836440 #1 Found device ASCOM OmniSim FilterWheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836534 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836623 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.838247 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.884533 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.884773 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.945858 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947210 #1 Found device ASI ST4 Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947404 #1 Found device Celestron Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947554 #1 Found device CPWI in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947698 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947803 #1 Found device ASCOM OmniSim Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947898 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947992 #1 Found device ASCOM Dome Control in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948086 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948185 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948279 #1 Found device Generic Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948372 #1 Found device Pipe diagnostic tool in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948474 #1 Found device POTH Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948570 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.976719 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977541 #1 Found device ZWO CAA in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977652 #1 Found device ASCOM OmniSim Rotator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977743 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.008805 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009722 #1 Found device ASCOM OmniSim Switch in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009839 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009936 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.040822 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.041639 #1 Found device ASCOM OmniSim CoverCalibrator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.041759 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.087332 #1 SharpCap startup complete in 3495ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:21:34.096691 #1 Opening default/previous camera on startup. in async Task SharpCap.UI.MainWindowSupport.OnFirstTickAsync()
Info 21:21:34.104400 #1 Changing camera from none to ZWO ASI533MC Pro in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 21:21:34.174896 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:21:34.175492 #1 Plate solver detection : AstroTortilla - Not detected in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:21:34.176311 #1 Plate
Info 21:21:30.627243 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 21:21:30.658584 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:30.675253 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 21:21:30.676763 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 21:21:30.728754 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 21:21:30.735759 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:30.740974 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:21:31.034056 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.034407 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.034707 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.039086 #1 Added device enumerator of type AltairViaTTDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.042831 #1 Added device enumerator of type MergedDeviceEnumerator2`2 in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.043043 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.045053 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 21:21:31.053831 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 21:21:31.053940 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.054022 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.054673 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055117 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055543 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.055915 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.059126 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.062202 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.065042 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.067889 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071016 #1 Added device enumerator of type BosmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071509 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071587 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.071644 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.072102 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:21:31.440739 #1 Application object created for SharpCap Pro (v4.1.13332, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 21:21:31.443858 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:21:31.444469 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 21:21:31.445463 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 21:21:31.548804 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:21:31.634141 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 21:21:31.729290 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.849851 #12 =='LogInfo Thread' (New Thread)
Info 21:21:31.849963 #12 AvailablePhysicalMemory: 4403Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850080 #12 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850143 #12 CPU: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850194 #12 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850247 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850294 #12 GCMemory: 58Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850343 #12 GraphicsCard: Intel(R) Iris(R) Xe Graphics, v31.0.101.5333 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850415 #12 InstallationId: f44c3133-13bd-4882-98fe-442358e46b2e in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850469 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850522 #12 OSEdition: Microsoft Windows 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850568 #12 OSFullVersion: 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850621 #12 OSProductType: 0x3 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850669 #12 OSVersion: Microsoft Windows NT 10.0.26100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850728 #12 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Users\turtle\AppData\Local\Microsoft\WindowsApps in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850780 #12 ProcessMemory: 117Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850835 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850910 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.850964 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851012 #12 SharpCapVersion: 4.1.13332.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851064 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851121 #12 SystemMemory: 12014Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851181 #12 TimeUTC: 2025-06-18T02:21:30.7411122Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851236 #12 TimeZone: Central Daylight Time (UTC + -05:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851284 #12 WindowsMediaVersion: 12.0.26100.4202 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.851400 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:21:31.906007 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:21:31.908071 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:21:31.916608 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.916904 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.917054 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 21:21:31.917152 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:21:31.928391 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Debug 21:21:32.302242 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:21:32.302784 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:21:32.581871 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:21:32.706971 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:21:32.743035 #28 =='Enumerate Basler Devices' (New Thread)
Info 21:21:32.743137 #28 Basler Pylon not found in PATH, not attempting to discover Basler cameras in Assembly SharpCap.Cameras.Basler.BaslerDeviceEnumerator.TryLoadPylon()
Error 21:21:32.843495 #28 Enumerating Basler Devices : Exception of type 'FileNotFoundException' : Could not load file or assembly 'Basler.Pylon, Version=1.2.0.0, Culture=neutral, PublicKeyToken=e389355f398382ab'. The system cannot find the file specified.
Stack Trace: at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumerateDevicesImpl()
at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices() in C:/Documents/Source Code/SharpCap/src/SharpCap.Cameras.Basler/BaslerDeviceEnumerator.cs:line 162 in void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices()
Info 21:21:32.848350 #29 =='.NET TP Worker' (New Thread)
Info 21:21:32.848451 #29 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 21:21:32.922846 #13 =='.NET TP Worker' (New Thread)
Debug 21:21:32.922872 #13 Alpaca discovery completed in 2004ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 21:21:33.757017 #1 BaslerDeviceEnumerator detected no devices in 136.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757263 #1 QHYDeviceEnumerator detected no devices in 1044.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757694 #1 Detected Camera: ZWO ASI533MC Pro (ZWO ASI Cameras, 0C1B050509020900) in 72.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757834 #1 AltairViaTTDeviceEnumerator detected no devices in 24.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.757931 #1 MergedDeviceEnumerator2`2 detected no devices in 48.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758024 #1 SxDeviceEnumerator detected no devices in 5.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758115 #1 PointGreyDeviceEnumerator detected no devices in 414.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758206 #1 AstCamPanDeviceEnumerator detected no devices in 45.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758303 #1 AstroAsisDeviceEnumerator detected no devices in 41.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758417 #1 CelestronDeviceEnumerator detected no devices in 178.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758532 #1 MoravianDeviceEnumerator detected no devices in 75.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758638 #1 AtikDeviceEnumerator detected no devices in 97.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758744 #1 P1DeviceEnumerator detected no devices in 14.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758849 #1 ToupTekDeviceEnumerator detected no devices in 96.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.758957 #1 OgmaDeviceEnumerator detected no devices in 65.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759066 #1 MeadeDeviceEnumerator detected no devices in 59.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759170 #1 MallincamDeviceEnumerator detected no devices in 19.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759302 #1 BosmaDeviceEnumerator detected no devices in 18.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759490 #1 Detected Camera: Integrated Webcam (DirectShow Cameras, ) in 20.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759624 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759723 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759815 #1 Detected Camera: ASCOM JustAHub Camera (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759905 #1 Detected Camera: ASCOM OmniSim Camera (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.759997 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 109.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760119 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760239 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760335 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:21:33.760732 #1 Camera scan completed in 1053ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:21:33.765936 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:21:33.835130 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836314 #1 Found device ASCOM JustAHub Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836440 #1 Found device ASCOM OmniSim FilterWheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836534 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.836623 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.838247 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.884533 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.884773 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.945858 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947210 #1 Found device ASI ST4 Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947404 #1 Found device Celestron Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947554 #1 Found device CPWI in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947698 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947803 #1 Found device ASCOM OmniSim Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947898 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.947992 #1 Found device ASCOM Dome Control in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948086 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948185 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948279 #1 Found device Generic Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948372 #1 Found device Pipe diagnostic tool in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948474 #1 Found device POTH Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.948570 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.976719 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977541 #1 Found device ZWO CAA in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977652 #1 Found device ASCOM OmniSim Rotator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:33.977743 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.008805 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009722 #1 Found device ASCOM OmniSim Switch in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009839 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.009936 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.040822 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.041639 #1 Found device ASCOM OmniSim CoverCalibrator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.041759 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:21:34.087332 #1 SharpCap startup complete in 3495ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:21:34.096691 #1 Opening default/previous camera on startup. in async Task SharpCap.UI.MainWindowSupport.OnFirstTickAsync()
Info 21:21:34.104400 #1 Changing camera from none to ZWO ASI533MC Pro in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 21:21:34.174896 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:21:34.175492 #1 Plate solver detection : AstroTortilla - Not detected in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:21:34.176311 #1 Plate
Re: Exception error
in void SharpCap.Base.FileWriters.OutputFormatChooser.SetAppropriateFormat(bool longExposure)
Debug 21:21:35.129814 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 21:21:35.131593 #31 =='Grab Thread' (New Thread)
Debug 21:21:35.131702 #31 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 21:21:35.166822 #31 Switching ZWO camera into video mode, exposure is now 50ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:21:35.168657 #32 =='ASI Grab Thread' (New Thread)
Debug 21:21:35.168732 #32 Started void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc() in void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc()
Debug 21:21:35.170108 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 21:21:35.170947 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 21:21:35.172082 #32 Paged memory check based on total memory of 12014Mb, available of 4630Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172266 #32 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172353 #32 Assigning 2048Mb to non-pool memory and 2048Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Info 21:21:35.172436 #32 Paged memory check based on total memory of 12014Mb, available of 4630Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172482 #32 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.173216 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:21:35.177678 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls, CancellationToken cancellationToken)
Info 21:21:35.246932 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:21:35.272286 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:21:35.272978 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Info 21:21:35.308170 #1 Loading library sensor characteristics from C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:21:35.308318 #1 Library sensor data loaded for ZWO ASI533MC Pro, RAW8, in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.Load(string cameraType, string sensor, string colourSpace, string cameraMode, bool speculative)
Info 21:21:35.332402 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 21:21:35.341901 #1 Ended (Profile applied) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:21:35.367389 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Debug 21:21:35.859476 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 21:21:35.860706 #1 Started new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:21:35.862073 #1 Ended new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:21:35.864814 #1 Started new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Debug 21:21:35.865324 #1 Ended new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Info 21:21:35.895649 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:21:35.902319 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:21:35.913287 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:21:35.984867 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:35.993673 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:35.997238 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.131554 #34 =='ASCOM UI Thread for Focuser' (New Thread)
Info 21:21:36.131695 #34 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 21:21:36.132342 #34 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 21:21:36.132843 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:21:36.133401 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:21:36.133477 #34 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:21:36.481193 #34 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 21:21:36.484036 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 21:21:36.487317 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:21:36.487457 #34 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 21:21:36.489093 #34 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Error 21:21:36.513836 #34 Error connecting to external device. : Exception of type 'DriverException' : Access to the port 'COM4' is denied.
Stack Trace: at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.514518 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.515230 #34 Connecting Focuser : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied.
Stack Trace: at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 634
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.515318 #34 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.515397 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.531564 #34 Async Connect to Celestron Focuser Driver failed : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.531682 #34 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.531775 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.536176 #1 Running step Connect the currently selected focuser : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.536304 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.536413 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.536891 #1 Sequencer stack at error is: FOCUSER CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.537258 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 21:21:36.537400 #1 Sequencer : Error : 'Access to the port 'COM4' is denied.' while running step Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.537882 #1 Sequencer : Info : 'Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 21:21:36.539082 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.539224 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.539351 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 21:21:36.539499 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540109 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540457 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540750 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.574182 #36 =='ASCOM UI Thread for Mount' (New Thread)
Info 21:21:36.574199 #36 Connecting to mount : Celestron Telescope Driver in void SharpCap.Models.Mount.set_Connected(bool value)
Info 21:21:36.574956 #36 Creating mount proxy to control Celestron Telescope Driver in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 21:21:36.575716 #36 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:21:36.575786 #36 Creating ASCOM Telescope mount of type ASCOM.Celestron.Telescope ('Celestron Telescope Driver') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:21:36.584881 #36 Created ASCOM Telescope mount Celestron (ASCOM Celestron Telescope Driver.), Version=6.1, InterfaceVersion=3, Info=ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron in SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)+() => { }
Debug 21:21:36.585040 #36 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Error 21:21:36.592525 #36 Error connecting to external device. : Exception of type 'DriverException' : Access to the port 'COM4' is denied.
Stack Trace: at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.592632 #36 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Info 21:21:36.592909 #36 Destroying mount proxy which was a generatedProxy_2 for Celestron Telescope Driver in void SharpCap.Models.Mount.CleanupProxy()
Debug 21:21:36.593950 #36 Started void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose() in void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose()
Error 21:21:36.598646 #36 Async Connect to Celestron Telescope Driver failed : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied.
Stack Trace: at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 634
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at IMountInterceptionProxy SharpCap.MountProxy.ASCOM.MountWrapper.get_ConnectedMount() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 923
at void SharpCap.MountProxy.ASCOM.MountWrapper.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 408
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 518
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeWithNoArgs(object obj, BindingFlags invokeAttr) in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.598762 #36 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.598854 #36 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.599812 #1 Running step Connect the currently selected mount : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.599946 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.600065 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.600278 #1 Sequencer stack at error is: MOUNT CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.600392 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 21:21:36.600503 #1 Sequencer : Error : 'Access to the port 'COM4' is denied.' while running step Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.600821 #1 Sequencer : Info : 'Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 21:21:36.601320 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.601456 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.601586 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 21:21:36.601766 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.602048 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.604137 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.605162 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Info 21:21:40.980837 #32 Dropped frames : 1 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:40.980880 #32 Dropped frames : 1 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:46.088487 #32 Dropped frames : 2 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:46.088557 #32 Dropped frames : 2 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:47.692919 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:21:47.748635 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:08.340582 #4 =='.NET TP Worker' (New Thread)
Info 21:22:08.340618 #4 Dropped frames : 5 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:08.340696 #4 Dropped frames : 3 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:15.525011 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:15.606235 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:22.399322 #32 Dropped frames : 8 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:22.399390 #32 Dropped frames : 8 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:23:10.089711 #13 Dropped frames : 15 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:23:10.089785 #13 Dropped frames : 17 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:24:23.088999 #20 =='.NET TP Worker' (New Thread)
Info 21:24:23.089019 #20 Dropped frames : 26 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:24:23.089070 #20 Dropped frames : 38 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:27:06.839975 #20 Dropped frames : 49 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:27:06.840079 #20 Dropped frames : 79 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:30:23.504187 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:30:23.535463 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:04.309316 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:04.320816 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:20.489422 #13 =='.NET TP Worker' (New Thread)
Warning 21:31:20.489446 #13 Possible dispatcher overload/UI Freeze. Background priority not run for 5.0s since 2:31:15 AM. Dispatcher queue length is 5, currently 0 in progress. Dispatcher disable count : 1 in async Task SharpCap.UISwitcher+DispatcherWatchDog.MonitorDispatcher()
Info 21:31:29.513502 #28 =='Display Update' (New Thread)
Warning 21:31:29.513723 #28 Obtaining lease on WriteableBitmap took 271ms in WriteableBitmapWriteLease SharpCap.Base.WPFFrameDisplay.GetWriteableBitmapLease(Size size, PixelFormat pixelFormat)
Info 21:32:27.689803 #32 Dropped frames : 101 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:32:27.689846 #32 Dropped frames : 155 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:32:53.183616 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:32:53.210800 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Debug 21:21:35.129814 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 21:21:35.131593 #31 =='Grab Thread' (New Thread)
Debug 21:21:35.131702 #31 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 21:21:35.166822 #31 Switching ZWO camera into video mode, exposure is now 50ms in void SharpCap.Cameras.ASI.ASICameraProxy.EnterCorrectMode()
Info 21:21:35.168657 #32 =='ASI Grab Thread' (New Thread)
Debug 21:21:35.168732 #32 Started void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc() in void SharpCap.Cameras.ASI.ASICameraProxy.MyGrabThreadProc()
Debug 21:21:35.170108 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 21:21:35.170947 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 21:21:35.172082 #32 Paged memory check based on total memory of 12014Mb, available of 4630Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172266 #32 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172353 #32 Assigning 2048Mb to non-pool memory and 2048Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Info 21:21:35.172436 #32 Paged memory check based on total memory of 12014Mb, available of 4630Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.172482 #32 Paged memory enabled at 2048Mb for Frame Cache and 2048Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 21:21:35.173216 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:21:35.177678 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls, CancellationToken cancellationToken)
Info 21:21:35.246932 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:21:35.272286 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC Pro~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Debug 21:21:35.272978 #1 Local sensor analysis data not found at C:\Users\turtle\AppData\Roaming\SharpCap\SensorCharacteristics\ZWO ASI533MC~RAW8.bin in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.TryLoad(string file, bool decryptIfEncrypted)
Info 21:21:35.308170 #1 Loading library sensor characteristics from C:\Program Files\SharpCap 4.1 (64 bit)\SensorLibrary.bin:ZWO ASI533MC~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 21:21:35.308318 #1 Library sensor data loaded for ZWO ASI533MC Pro, RAW8, in SensorCharacteristics SharpCap.CameraAnalysis.SensorCharacteristics.Load(string cameraType, string sensor, string colourSpace, string cameraMode, bool speculative)
Info 21:21:35.332402 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason) in void SharpCap.Base.CaptureProviderBase<T>.StartPreview(PreviewChangeReason reason)
Debug 21:21:35.341901 #1 Ended (Profile applied) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 21:21:35.367389 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Debug 21:21:35.859476 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 21:21:35.860706 #1 Started new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:21:35.862073 #1 Ended new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app) in new SharpCap.ViewModels.MountViewModel(IMount model, IApplication app)
Debug 21:21:35.864814 #1 Started new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Debug 21:21:35.865324 #1 Ended new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app) in new SharpCap.ViewModels.FocuserViewModel(IFocuser adaptor, IUIProvider uiProvider, IApplication app)
Info 21:21:35.895649 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:21:35.902319 #1 Generating sequencer code for Auto-Connecting Hardware status :
in ScriptBlock SharpCap.MiniWizards.MiniWizardModel.CreateScript(bool liveCompile)
Info 21:21:35.913287 #1 The sequence being run is :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Debug 21:21:35.984867 #1 Sequencer : Starting : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:35.993673 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:35.997238 #1 Sequencer : Starting : Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.131554 #34 =='ASCOM UI Thread for Focuser' (New Thread)
Info 21:21:36.131695 #34 Connecting to focuser : Celestron Focuser Driver in void SharpCap.Models.Focuser.set_Connected(bool value)
Debug 21:21:36.132342 #34 Started IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Debug 21:21:36.132843 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:21:36.133401 #34 Started new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:21:36.133477 #34 Creating ASCOM Focuser of type ASCOM.Celestron.Focuser ('Celestron Focuser Driver') in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Info 21:21:36.481193 #34 Created ASCOM Focuser Celestron Focuser (ASCOM Focuser Driver for Celestron Telescope.), Version=6.1, InterfaceVersion=3, Info=ASCOM driver for Celestron focuser. Connected through the Mount and HC. Version: 6.1 in Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)+() => { }
Debug 21:21:36.484036 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocusAdaptor(string id, string name)
Debug 21:21:36.487317 #34 Ended new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name) in new Sharpcap.FocuserProxy.ASCOM.FocuserWrapper(string id, string name)
Debug 21:21:36.487457 #34 Ended IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id) in IFocuserProxy SharpCap.FocuserFinder.GetFocuser(string id)
Info 21:21:36.489093 #34 Configuring focuser overshoot compensation with overshoot of 200, approch inwards is False in void SharpCap.Models.OvershootProxy.SetupParameters()
Error 21:21:36.513836 #34 Error connecting to external device. : Exception of type 'DriverException' : Access to the port 'COM4' is denied.
Stack Trace: at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.514518 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.515230 #34 Connecting Focuser : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied.
Stack Trace: at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 634
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.515318 #34 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.515397 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)
Error 21:21:36.531564 #34 Async Connect to Celestron Focuser Driver failed : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.531682 #34 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.531775 #34 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.536176 #1 Running step Connect the currently selected focuser : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.536304 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.536413 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.536891 #1 Sequencer stack at error is: FOCUSER CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.537258 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 21:21:36.537400 #1 Sequencer : Error : 'Access to the port 'COM4' is denied.' while running step Connect the currently selected focuser in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.537882 #1 Sequencer : Info : 'Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 21:21:36.539082 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.539224 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at TRet System.Dynamic.UpdateDelegates.UpdateAndExecute2<T0, T1, TRet>(CallSite site, T0 arg0, T1 arg1)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void ASCOM.Com.DriverAccess.Focuser.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/Focuser.cs:line 86
at void Sharpcap.FocuserProxy.ASCOM.FocusAdaptor.set_Connected(bool value)+() => { } in C:/Documents/Source Code/SharpCap/src/Sharpcap.FocuserProxy.ASCOM/FocusAdaptor.cs:line 294
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.539351 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 21:21:36.539499 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540109 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540457 #1 Sequencer : Starting : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.540750 #1 Sequencer : Starting : Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.574182 #36 =='ASCOM UI Thread for Mount' (New Thread)
Info 21:21:36.574199 #36 Connecting to mount : Celestron Telescope Driver in void SharpCap.Models.Mount.set_Connected(bool value)
Info 21:21:36.574956 #36 Creating mount proxy to control Celestron Telescope Driver in IMountProxy SharpCap.Models.Mount.CreateProxy()
Debug 21:21:36.575716 #36 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:21:36.575786 #36 Creating ASCOM Telescope mount of type ASCOM.Celestron.Telescope ('Celestron Telescope Driver') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 21:21:36.584881 #36 Created ASCOM Telescope mount Celestron (ASCOM Celestron Telescope Driver.), Version=6.1, InterfaceVersion=3, Info=ASCOM.Celestron.Telescope, 6.1.7350.35105
Chris Rowland
Copyright © 2020 Chris Rowland
ASCOM Telescope driver for Celestron in SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)+() => { }
Debug 21:21:36.585040 #36 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Error 21:21:36.592525 #36 Error connecting to external device. : Exception of type 'DriverException' : Access to the port 'COM4' is denied.
Stack Trace: at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Error 21:21:36.592632 #36 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName)
Info 21:21:36.592909 #36 Destroying mount proxy which was a generatedProxy_2 for Celestron Telescope Driver in void SharpCap.Models.Mount.CleanupProxy()
Debug 21:21:36.593950 #36 Started void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose() in void SharpCap.MountProxy.ASCOM.MountWrapper.Dispose()
Error 21:21:36.598646 #36 Async Connect to Celestron Telescope Driver failed : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied.
Stack Trace: at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 634
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at IMountInterceptionProxy SharpCap.MountProxy.ASCOM.MountWrapper.get_ConnectedMount() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 923
at void SharpCap.MountProxy.ASCOM.MountWrapper.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 408
at void SharpCap.MountProxy.ASCOM.RefreshMountProxy.EnsureConnected() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/RefreshMountProxy.cs:line 518
at object RuntimeMethodHandle.InvokeMethod(object target, Void** arguments, Signature sig, bool isConstructor)
at object System.Reflection.MethodBaseInvoker.InvokeWithNoArgs(object obj, BindingFlags invokeAttr) in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.598762 #36 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.598854 #36 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Base.Interfaces.FakeAsyncConnectable<T>.DoInTask(Action a, CancellationToken cancellationToken, string action)+(?) => { }
Error 21:21:36.599812 #1 Running step Connect the currently selected mount : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.599946 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Error 21:21:36.600065 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.600278 #1 Sequencer stack at error is: MOUNT CONNECT while running IGNORE ERRORS FROM ONERROR RUN "" while running SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Info 21:21:36.600392 #1 The script being run was :
SEQUENCE
IGNORE ERRORS FROM ONERROR RUN ""
FOCUSER CONNECT
END IGNORE ERRORS
IGNORE ERRORS FROM ONERROR RUN ""
MOUNT CONNECT
END IGNORE ERRORS
END SEQUENCE in void SharpCap.Sequencer.SequencerContext.OnStepError(ISequencerStep step, Exception exception)
Debug 21:21:36.600503 #1 Sequencer : Error : 'Access to the port 'COM4' is denied.' while running step Connect the currently selected mount in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.600821 #1 Sequencer : Info : 'Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Warning 21:21:36.601320 #1 Ignoring error from sequencer that occurred inside Ignore Errors Step : Exception of type 'FailedToConnectException' : Access to the port 'COM4' is denied. () in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.601456 #1 Inner Exception : ASCOM.DriverException: Access to the port 'COM4' is denied.
---> System.UnauthorizedAccessException: Access to the port 'COM4' is denied.
--- End of inner exception stack trace ---
at void ASCOM.Com.DriverAccess.DynamicAccess.CheckDotNetExceptions(string memberName, Exception e) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 278
at bool ASCOM.Com.DriverAccess.DynamicAccess.TrySetMember(SetMemberBinder binder, object value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/DynamicAccess.cs:line 105
at object CallSite.Target(Closure, CallSite, object, bool)
at void ASCOM.Com.DriverAccess.ASCOMDevice.set_Connected(bool value) in J:/ASCOMLibrary/ASCOM.Com/ASCOM.Com.DriverAccess/BaseClass/ASCOMDevice.cs:line 47
at void SharpCap.MountProxy.ASCOM.MountInterceptionProxy.set_Connected(bool value) in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 264
at void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()+() => { } in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 150
at void SharpCap.Base.ExtensionMethods.WrapFailedToConnectException(object o, Action a, string deviceName) in C:/Documents/Source Code/SharpCap/src/SharpCap.Base/ExtensionMethods.cs:line 629 in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Warning 21:21:36.601586 #1 Inner Exception : System.UnauthorizedAccessException: Access to the port 'COM4' is denied. in async Task SharpCap.Sequencer.Steps.IgnoreErrorsStep.ExecuteImplAsync(ISequencerContext context, CancellationToken cancellationToken)
Debug 21:21:36.601766 #1 Sequencer : Info : 'Ignoring error and continuing sequence : Access to the port 'COM4' is denied.' while running step Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.602048 #1 Sequencer : Completed : Ignore any errors when running these steps in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Debug 21:21:36.604137 #1 Sequencer : Completed : in void SharpCap.Sequencer.SequencerContext.OnProgress(string e)
Info 21:21:36.605162 #1 The sequence is now finished. in async Task SharpCap.Sequencer.SequencerContext.RunAsync(ScriptBlock script)
Info 21:21:40.980837 #32 Dropped frames : 1 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:40.980880 #32 Dropped frames : 1 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:46.088487 #32 Dropped frames : 2 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:46.088557 #32 Dropped frames : 2 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:21:47.692919 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:21:47.748635 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:08.340582 #4 =='.NET TP Worker' (New Thread)
Info 21:22:08.340618 #4 Dropped frames : 5 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:08.340696 #4 Dropped frames : 3 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:15.525011 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:15.606235 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:22:22.399322 #32 Dropped frames : 8 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:22:22.399390 #32 Dropped frames : 8 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:23:10.089711 #13 Dropped frames : 15 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:23:10.089785 #13 Dropped frames : 17 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:24:23.088999 #20 =='.NET TP Worker' (New Thread)
Info 21:24:23.089019 #20 Dropped frames : 26 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:24:23.089070 #20 Dropped frames : 38 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:27:06.839975 #20 Dropped frames : 49 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:27:06.840079 #20 Dropped frames : 79 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:30:23.504187 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:30:23.535463 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:04.309316 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:04.320816 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:31:20.489422 #13 =='.NET TP Worker' (New Thread)
Warning 21:31:20.489446 #13 Possible dispatcher overload/UI Freeze. Background priority not run for 5.0s since 2:31:15 AM. Dispatcher queue length is 5, currently 0 in progress. Dispatcher disable count : 1 in async Task SharpCap.UISwitcher+DispatcherWatchDog.MonitorDispatcher()
Info 21:31:29.513502 #28 =='Display Update' (New Thread)
Warning 21:31:29.513723 #28 Obtaining lease on WriteableBitmap took 271ms in WriteableBitmapWriteLease SharpCap.Base.WPFFrameDisplay.GetWriteableBitmapLease(Size size, PixelFormat pixelFormat)
Info 21:32:27.689803 #32 Dropped frames : 101 of type ZWOTimeout in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:32:27.689846 #32 Dropped frames : 155 of type ZWOFromSDK in void SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, int count)
Info 21:32:53.183616 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 21:32:53.210800 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.UrlLaunchAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Re: Exception error
I thought I had worked it out, but I came outside and it wouldn't connect to mount or focuser. I need more iinstructions please...
-
admin
- Site Admin
- Posts: 15520
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Exception error
Hi,
there are a couple of things of interest in those logs...
1) The failure to connect to the mount comes with the error message 'Access to COM4 is denied'
I suspect that this means that some other software (another copy of SharpCap?) is still running and using the COM4 port that the mount is connected to, meaning that the new copy of SharpCap cannot access the mount. Usually finding and closing the other software will fix this issue. If that fails, try a reboot of the PC.
2) Near the bottom of the log, you start to get lots of messages about dropped/lost frames from your ZWO camera
This is worth keeping an eye on - it means that the camera has stopped responding properly to the software properly. This can be just random, or it could indicate something like a problem with the USB cabling that causes communications problems with the camera. If you have USB connection issues with one device then maybe similar issues could also be affecting communications with the mount. Worth checking that your USB cables are not in poor shape and to remove any extensions/hubs for a test (each device with a single cable of less than 2.5m straight back to the PC).
cheers,
Robin
there are a couple of things of interest in those logs...
1) The failure to connect to the mount comes with the error message 'Access to COM4 is denied'
I suspect that this means that some other software (another copy of SharpCap?) is still running and using the COM4 port that the mount is connected to, meaning that the new copy of SharpCap cannot access the mount. Usually finding and closing the other software will fix this issue. If that fails, try a reboot of the PC.
2) Near the bottom of the log, you start to get lots of messages about dropped/lost frames from your ZWO camera
This is worth keeping an eye on - it means that the camera has stopped responding properly to the software properly. This can be just random, or it could indicate something like a problem with the USB cabling that causes communications problems with the camera. If you have USB connection issues with one device then maybe similar issues could also be affecting communications with the mount. Worth checking that your USB cables are not in poor shape and to remove any extensions/hubs for a test (each device with a single cable of less than 2.5m straight back to the PC).
cheers,
Robin
Re: Exception error
1:50:22.615667 #1 Starting SharpCap v4.1.13332.0 (X64, 64 bit) at 2025-06-19T21:50:22.5935504-05:00 in void SharpCap.Program.Main()
Info 21:50:22.632052 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 21:50:22.664964 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.682690 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 21:50:22.684315 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 21:50:22.720930 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 21:50:22.725132 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.726585 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.898814 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.898947 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.899022 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.902866 #1 Added device enumerator of type AltairViaTTDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.906660 #1 Added device enumerator of type MergedDeviceEnumerator2`2 in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.906754 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.908649 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 21:50:22.913382 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 21:50:22.913474 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913543 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913866 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913944 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.914010 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.914075 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.917323 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.920549 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.923776 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.926950 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930081 #1 Added device enumerator of type BosmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930191 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930254 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930312 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930369 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:23.381380 #1 Application object created for SharpCap Pro (v4.1.13332, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 21:50:23.384931 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:50:23.385778 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 21:50:23.386725 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 21:50:23.469239 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:50:23.520597 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 21:50:23.595822 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.751026 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:50:23.753080 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:50:23.759127 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.759421 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.759570 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 21:50:23.759693 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.768826 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Info 21:50:23.899554 #12 =='LogInfo Thread' (New Thread)
Info 21:50:23.899726 #12 AvailablePhysicalMemory: 4707Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899839 #12 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899899 #12 CPU: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899949 #12 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899997 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900046 #12 GCMemory: 62Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900094 #12 GraphicsCard: Intel(R) Iris(R) Xe Graphics, v31.0.101.5333 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900153 #12 InstallationId: f44c3133-13bd-4882-98fe-442358e46b2e in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900203 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900249 #12 OSEdition: Microsoft Windows 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900297 #12 OSFullVersion: 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900356 #12 OSProductType: 0x3 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900400 #12 OSVersion: Microsoft Windows NT 10.0.26100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900462 #12 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Users\turtle\AppData\Local\Microsoft\WindowsApps; in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900515 #12 ProcessMemory: 142Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900565 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900609 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900653 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900696 #12 SharpCapVersion: 4.1.13332.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900744 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900795 #12 SystemMemory: 12014Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900842 #12 TimeUTC: 2025-06-20T02:50:22.7256858Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900889 #12 TimeZone: Central Daylight Time (UTC + -05:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900933 #12 WindowsMediaVersion: 12.0.26100.4202 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900972 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Debug 21:50:24.112637 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:50:24.113000 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:50:24.366437 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:50:24.486118 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:50:24.499294 #26 =='Enumerate Basler Devices' (New Thread)
Info 21:50:24.499480 #26 Basler Pylon not found in PATH, not attempting to discover Basler cameras in Assembly SharpCap.Cameras.Basler.BaslerDeviceEnumerator.TryLoadPylon()
Info 21:50:24.518237 #10 =='.NET TP Worker' (New Thread)
Info 21:50:24.518320 #10 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Error 21:50:24.528772 #26 Enumerating Basler Devices : Exception of type 'FileNotFoundException' : Could not load file or assembly 'Basler.Pylon, Version=1.2.0.0, Culture=neutral, PublicKeyToken=e389355f398382ab'. The system cannot find the file specified.
Stack Trace: at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumerateDevicesImpl()
at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices() in C:/Documents/Source Code/SharpCap/src/SharpCap.Cameras.Basler/BaslerDeviceEnumerator.cs:line 162 in void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices()
Info 21:50:24.795604 #25 =='.NET TP Worker' (New Thread)
Debug 21:50:24.795629 #25 Alpaca discovery completed in 2002ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 21:50:25.499728 #1 BaslerDeviceEnumerator detected no devices in 41.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.500002 #1 QHYDeviceEnumerator detected no devices in 1008.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503553 #1 Detected Camera: ZWO ASI533MC Pro (ZWO ASI Cameras, 0C1B050509020900) in 35.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503778 #1 AltairViaTTDeviceEnumerator detected no devices in 16.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503879 #1 MergedDeviceEnumerator2`2 detected no devices in 14.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503981 #1 SxDeviceEnumerator detected no devices in 10.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504080 #1 PointGreyDeviceEnumerator detected no devices in 352.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504179 #1 AstCamPanDeviceEnumerator detected no devices in 16.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504295 #1 AstroAsisDeviceEnumerator detected no devices in 12.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504411 #1 CelestronDeviceEnumerator detected no devices in 74.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504532 #1 MoravianDeviceEnumerator detected no devices in 33.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504636 #1 AtikDeviceEnumerator detected no devices in 14.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504738 #1 P1DeviceEnumerator detected no devices in 4.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504882 #1 ToupTekDeviceEnumerator detected no devices in 50.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505006 #1 OgmaDeviceEnumerator detected no devices in 3.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505113 #1 MeadeDeviceEnumerator detected no devices in 10.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505227 #1 MallincamDeviceEnumerator detected no devices in 17.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505333 #1 BosmaDeviceEnumerator detected no devices in 12.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505568 #1 Detected Camera: Integrated Webcam (DirectShow Cameras, ) in 16.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505852 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505962 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506055 #1 Detected Camera: ASCOM JustAHub Camera (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506146 #1 Detected Camera: ASCOM OmniSim Camera (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506242 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506379 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506502 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506601 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506991 #1 Camera scan completed in 1020ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:50:25.511478 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:25.546079 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547158 #1 Found device ASCOM JustAHub Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547281 #1 Found device ASCOM OmniSim FilterWheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547373 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547462 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.548255 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.583858 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.584094 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.656058 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657699 #1 Found device ASI ST4 Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657843 #1 Found device Celestron Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657934 #1 Found device CPWI in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658023 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658111 #1 Found device ASCOM OmniSim Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658199 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658290 #1 Found device ASCOM Dome Control in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658378 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658465 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658550 #1 Found device Generic Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658636 #1 Found device Pipe diagnostic tool in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658722 #1 Found device POTH Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658808 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.685575 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686437 #1 Found device ZWO CAA in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686561 #1 Found device ASCOM OmniSim Rotator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686651 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.717338 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718154 #1 Found device ASCOM OmniSim Switch in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718281 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718372 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.733089 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.733884 #1 Found device ASCOM OmniSim CoverCalibrator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.734028 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.750220 #1 SharpCap startup complete in 3156ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:50:25.759233 #1 Opening default/previous camera on startup. in async Task SharpCap.UI.MainWindowSupport.OnFirstTickAsync()
Info 21:50:25.766494 #1 Changing camera from none to ZWO ASI533MC Pro in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 21:50:25.813512 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.814138 #1 Plate solver detection : AstroTortilla - Not detected in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.814870 #1 Plate solver detection : All Sky Plate Solver - Not found at C:\Users\turtle\AppData\Local\Astrometry in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815102 #1 Plate solver detection : Ansvr - Not found at C:\Users\turtle\AppData\Local\cygwin_ansvr in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815297 #1 Plate solver detection : Cygwin/Astrometry based - Not found at C:\cygwin in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815672 #1 Plate solver detection : Astap (manual location) - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815897 #1 Plate solver detection : Astap (auto-detect) - Not found at c:\Program Files (x86)\Astap\Astap.exe in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.825545 #1 Capture Event : OpeningDevice in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:25.827373 #1 OpeningDevice event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:50:25.829249 #1 Opening device : ZWO ASI533MC Pro (via ZWO ASI Cameras) in void SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag, ISensorDataProvider sensorDataProvider)
Debug 21:50:25.829906 #1 Started void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Debug 21:50:25.830906 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Info 21:50:25.831784 #1 Started void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 21:50:25.832198 #1 Started void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagDa
Info 21:50:22.632052 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 21:50:22.664964 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.682690 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 21:50:22.684315 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 21:50:22.720930 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 21:50:22.725132 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.726585 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 21:50:22.898814 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.898947 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.899022 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.902866 #1 Added device enumerator of type AltairViaTTDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.906660 #1 Added device enumerator of type MergedDeviceEnumerator2`2 in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.906754 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.908649 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 21:50:22.913382 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 21:50:22.913474 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913543 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913866 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.913944 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.914010 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.914075 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.917323 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.920549 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.923776 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.926950 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930081 #1 Added device enumerator of type BosmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930191 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930254 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930312 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:22.930369 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 21:50:23.381380 #1 Application object created for SharpCap Pro (v4.1.13332, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 21:50:23.384931 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:50:23.385778 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 21:50:23.386725 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 21:50:23.469239 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 21:50:23.520597 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 21:50:23.595822 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.751026 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 21:50:23.753080 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 21:50:23.759127 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.759421 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.759570 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 21:50:23.759693 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 21:50:23.768826 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Info 21:50:23.899554 #12 =='LogInfo Thread' (New Thread)
Info 21:50:23.899726 #12 AvailablePhysicalMemory: 4707Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899839 #12 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899899 #12 CPU: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899949 #12 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.899997 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900046 #12 GCMemory: 62Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900094 #12 GraphicsCard: Intel(R) Iris(R) Xe Graphics, v31.0.101.5333 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900153 #12 InstallationId: f44c3133-13bd-4882-98fe-442358e46b2e in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900203 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900249 #12 OSEdition: Microsoft Windows 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900297 #12 OSFullVersion: 10.0.26100 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900356 #12 OSProductType: 0x3 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900400 #12 OSVersion: Microsoft Windows NT 10.0.26100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900462 #12 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Users\turtle\AppData\Local\Microsoft\WindowsApps; in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900515 #12 ProcessMemory: 142Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900565 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900609 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900653 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900696 #12 SharpCapVersion: 4.1.13332.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900744 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900795 #12 SystemMemory: 12014Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900842 #12 TimeUTC: 2025-06-20T02:50:22.7256858Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900889 #12 TimeZone: Central Daylight Time (UTC + -05:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900933 #12 WindowsMediaVersion: 12.0.26100.4202 in void SharpCap.LogSystemInfo.ThreadProc()
Info 21:50:23.900972 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Debug 21:50:24.112637 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:50:24.113000 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 21:50:24.366437 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:50:24.486118 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:50:24.499294 #26 =='Enumerate Basler Devices' (New Thread)
Info 21:50:24.499480 #26 Basler Pylon not found in PATH, not attempting to discover Basler cameras in Assembly SharpCap.Cameras.Basler.BaslerDeviceEnumerator.TryLoadPylon()
Info 21:50:24.518237 #10 =='.NET TP Worker' (New Thread)
Info 21:50:24.518320 #10 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Error 21:50:24.528772 #26 Enumerating Basler Devices : Exception of type 'FileNotFoundException' : Could not load file or assembly 'Basler.Pylon, Version=1.2.0.0, Culture=neutral, PublicKeyToken=e389355f398382ab'. The system cannot find the file specified.
Stack Trace: at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumerateDevicesImpl()
at void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices() in C:/Documents/Source Code/SharpCap/src/SharpCap.Cameras.Basler/BaslerDeviceEnumerator.cs:line 162 in void SharpCap.Cameras.Basler.BaslerDeviceEnumerator.EnumDevices()
Info 21:50:24.795604 #25 =='.NET TP Worker' (New Thread)
Debug 21:50:24.795629 #25 Alpaca discovery completed in 2002ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 21:50:25.499728 #1 BaslerDeviceEnumerator detected no devices in 41.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.500002 #1 QHYDeviceEnumerator detected no devices in 1008.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503553 #1 Detected Camera: ZWO ASI533MC Pro (ZWO ASI Cameras, 0C1B050509020900) in 35.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503778 #1 AltairViaTTDeviceEnumerator detected no devices in 16.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503879 #1 MergedDeviceEnumerator2`2 detected no devices in 14.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.503981 #1 SxDeviceEnumerator detected no devices in 10.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504080 #1 PointGreyDeviceEnumerator detected no devices in 352.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504179 #1 AstCamPanDeviceEnumerator detected no devices in 16.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504295 #1 AstroAsisDeviceEnumerator detected no devices in 12.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504411 #1 CelestronDeviceEnumerator detected no devices in 74.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504532 #1 MoravianDeviceEnumerator detected no devices in 33.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504636 #1 AtikDeviceEnumerator detected no devices in 14.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504738 #1 P1DeviceEnumerator detected no devices in 4.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.504882 #1 ToupTekDeviceEnumerator detected no devices in 50.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505006 #1 OgmaDeviceEnumerator detected no devices in 3.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505113 #1 MeadeDeviceEnumerator detected no devices in 10.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505227 #1 MallincamDeviceEnumerator detected no devices in 17.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505333 #1 BosmaDeviceEnumerator detected no devices in 12.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505568 #1 Detected Camera: Integrated Webcam (DirectShow Cameras, ) in 16.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505852 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.505962 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506055 #1 Detected Camera: ASCOM JustAHub Camera (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506146 #1 Detected Camera: ASCOM OmniSim Camera (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506242 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 312.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506379 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506502 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506601 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 21:50:25.506991 #1 Camera scan completed in 1020ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 21:50:25.511478 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:25.546079 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547158 #1 Found device ASCOM JustAHub Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547281 #1 Found device ASCOM OmniSim FilterWheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547373 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.547462 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.548255 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.583858 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.584094 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.656058 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657699 #1 Found device ASI ST4 Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657843 #1 Found device Celestron Telescope Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.657934 #1 Found device CPWI in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658023 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658111 #1 Found device ASCOM OmniSim Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658199 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658290 #1 Found device ASCOM Dome Control in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658378 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658465 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658550 #1 Found device Generic Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658636 #1 Found device Pipe diagnostic tool in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658722 #1 Found device POTH Hub in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.658808 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.685575 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686437 #1 Found device ZWO CAA in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686561 #1 Found device ASCOM OmniSim Rotator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.686651 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.717338 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718154 #1 Found device ASCOM OmniSim Switch in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718281 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.718372 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.733089 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.733884 #1 Found device ASCOM OmniSim CoverCalibrator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.734028 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 21:50:25.750220 #1 SharpCap startup complete in 3156ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 21:50:25.759233 #1 Opening default/previous camera on startup. in async Task SharpCap.UI.MainWindowSupport.OnFirstTickAsync()
Info 21:50:25.766494 #1 Changing camera from none to ZWO ASI533MC Pro in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 21:50:25.813512 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.814138 #1 Plate solver detection : AstroTortilla - Not detected in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.814870 #1 Plate solver detection : All Sky Plate Solver - Not found at C:\Users\turtle\AppData\Local\Astrometry in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815102 #1 Plate solver detection : Ansvr - Not found at C:\Users\turtle\AppData\Local\cygwin_ansvr in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815297 #1 Plate solver detection : Cygwin/Astrometry based - Not found at C:\cygwin in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815672 #1 Plate solver detection : Astap (manual location) - Not configured in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.815897 #1 Plate solver detection : Astap (auto-detect) - Not found at c:\Program Files (x86)\Astap\Astap.exe in bool SharpCap.ImageProcessing.PlateSolving.CombinedPlateSolveFactory.CheckInstalledImpl()
Info 21:50:25.825545 #1 Capture Event : OpeningDevice in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 21:50:25.827373 #1 OpeningDevice event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 21:50:25.829249 #1 Opening device : ZWO ASI533MC Pro (via ZWO ASI Cameras) in void SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag, ISensorDataProvider sensorDataProvider)
Debug 21:50:25.829906 #1 Started void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Debug 21:50:25.830906 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow, ISensorDataProvider sensorDataProvider)
Info 21:50:25.831784 #1 Started void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 21:50:25.832198 #1 Started void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagDa