SharpCap latest version ...

Anything that doesn't fit into any of the other forums
User avatar
Real14
Posts: 46
Joined: Sat May 26, 2018 6:46 pm

SharpCap latest version ...

#1

Post by Real14 »

... why is it so slow?

Hi,

I upgraded to the last version 4.1.9418.0 -+ 21/04/2025

and have the feeling it has become slow compared to the older versions...

Anybody else?

regards Rainer
regards Rainer

Observatorio Real de 14
22° North 101° West
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: SharpCap latest version ...

#2

Post by Gfischer »

Same here. My laptop is an old i3 processor. I think my machine is the limiting factor. I re installed older version and all is well.
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: SharpCap latest version ...

#3

Post by admin »

Hi,

unfortunately the amount of change between 4.1.9185 and the latest versions is immense, so I can't investigate what might be causing any slowdown between those two versions without a detailed description of which functions of SharpCap seem to have slowed down and which do not. I have already seen the suggestion from George of a recent slowdown which might be connected with changes to star detection in the last couple of versions - I will try to look at the timings for star detection in the old vs new code to see if there is a real effect there or not.

cheers,

Robin
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: SharpCap latest version ...

#4

Post by Gfischer »

Thanks for looking into this Robin, let me know if you need a Guinea pig. My laptop is as slow as they get.
User avatar
Real14
Posts: 46
Joined: Sat May 26, 2018 6:46 pm

Re: SharpCap latest version ...

#5

Post by Real14 »

Hi,

Following points so far are slow and have not yet tested everything

-Connecting a camera with filter wheel and focuser

-changing camera from MONO8 to MONO16

-live stream of images, what I see in the preview does not correspond to the real camera speed

-changing from one Custom ROI to another custom ROI
regards Rainer

Observatorio Real de 14
22° North 101° West
Robert
Posts: 3
Joined: Fri Nov 04, 2022 4:00 pm

Re: SharpCap latest version ...

#6

Post by Robert »

Hi,

I went back and progressively uninstalled/installed the past few months of SharpCap 64-bit versions. I tested switching from RAW8 to RAW16.

Based on the results, the "slow down" for me started with version 4.1.13285.0 dated 4/21/2025. Before that, I saw no noticeable slow down.
Also, the latest version 4.1.13295.0 dated 4/30/2025 seems to have fixed the problem.

Hope this helps.

Clear skies, Robert
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: SharpCap latest version ...

#7

Post by Gfischer »

Robin,
The new sc version works great much quicker.
The fwhm is still reading higher than it used to. When doing focus I get around 3.0. When live stacking it varies from 6.0 to 12.0. I noticed the variance is higher at lower altitudes. Probably due to the bad light pollution near the horizon combined with worse seeing. Sometimes I turn off the filter when live stacking, the readings are high but stars are tight and in focus. What ever you did to this last version the program runs great.

Thank you
George
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: SharpCap latest version ...

#8

Post by admin »

Hi folks,

glad to hear that the newer version (13295) is fine - I still have no idea what happened to 13285 to make it different (slow, unreliable, odd version number showing, etc). Hoping it doesn't happen again!

The FWHM should be more accurate than it used to be due to a better estimation of the background level around the star - estimate the background too low and you see a lot of outlying brightness from the star and get an FWHM that is too high. Estimate the background too high and you only identify the core as being part of the star and get an FWHM that is too low. My testing on the new code gave values that were less sensitive to image brightness changes and more in line with other applications, but of course there are an infinite number of different possible astro images with stars in and I only tested a small sample. If you are getting results that you feel are wrong, I'd suggest trying an FWHM measurement in another application to see how much the two values differ by - if it's a lot then let me know (and send me some sample images).

cheers,

Robin
Gfischer
Posts: 323
Joined: Thu Jun 22, 2023 4:20 pm

Re: SharpCap latest version ...

#9

Post by Gfischer »

Robin,
I set focus about 3.0 fwhm. I then livestacked the linked image. I turned off filter due to the near the top fwhm readings. I checked the fwhm of this image in Siril and its about the 5.0 range. Maybe the livestacking process is cusing this?

https://www.dropbox.com/scl/fo/dr2atv1a ... ryqep&dl=0
User avatar
admin
Site Admin
Posts: 17584
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: SharpCap latest version ...

#10

Post by admin »

Hi George,

thanks for sharing - unfortunately that FITS file looks as though it is the live stacked image rather than a raw camera frame - all the measurements of FWHM you see during live stacking will be coming from raw camera frames, so I can't really learn much by investigating the stacked image.

cheers,

Robin
Post Reply