Robin
Don't know if this is a SC bug or camera (Zwo ASI071MC Pro) specific.
When the USB gets disconnected (for whatever reason), SC tries to reconnect a few times and then gives a empty screen with the notice bar on top.
When then the camera is reconnected and opened again in SC, all used settings and connections are enabled again.
Except the Cooler Power: it stays at 0 and cooling is not doing anything, despite Cooling is set to On.
Only after closing SC and starting it again, Cooler Power is working again.
See attached log file of the first time.
Tested same scenario 2 times after that and same results.
Menno
Cooler Power not switched on after USB disconnect
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
Cooler Power not switched on after USB disconnect
- Attachments
-
- Log_2024-05-13T22_49_18-4628.zip
- (13.83 KiB) Downloaded 37 times
Meade LX200 8" f/10 ACF OTA / Ioptron CEM25EC / Zwo ASI071MC Pro / Zwo ASI482MC
-
admin
- Site Admin
- Posts: 17545
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Cooler Power not switched on after USB disconnect
Hi Menno,
I have an 071C, so I can have a play with that to see if I can work out what is going on. A first guess is that flipping the cooler to 'Off' and then back to 'On' may fix things without needing to restart - I have seen that sort of issue pop up before.
cheers,
Robin
I have an 071C, so I can have a play with that to see if I can work out what is going on. A first guess is that flipping the cooler to 'Off' and then back to 'On' may fix things without needing to restart - I have seen that sort of issue pop up before.
cheers,
Robin