I have the older SV305 (Non Pro) SVBony camera that used to work natively in SharpCap a couple years ago. With the very latest version(s) of SharpCap it is not detected Natively and even when it is detected its only using a specific older version of the SVBony Drivers (Ver 1.3.6 from around Aug 2020) and can only use Direct Show.
I have come to the point where I want to install an older version of SharpCap but I also want to keep using the latest 64 bit version for my ZWO 533 camera.
I am expecting the old SV305 is unlikely to work in SharpCap latest version and yes I have tried latest SV Bony drivers - in fact I have tried most of them (the older versions are being flagged as virus ridden by Bit Defender).
So - I would like to install and older probably 32 bit version of SharpCap and I would like to know if there are any issues having the latest 4.1 64 bit version installed at the same time with a 32 Bit version?
Cheers
SVBony SV305 (Older Non Pro) not natively detected
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi again,
I decided to install the 32 bit versions figuring they would go to (x86) folder so less chance of conflict. I found out where the native stops working.
Version 4.1 32 bit is a no go for any version.
Version 4.0 32 bit Build 8682 released 14 Feb 2022 works with SV305 in native mode. Yippee.
Version 4.0 32 bit Build 8695 released 21 Feb 2022 does not, and the notes indicate SVBony SDK updated. So I believe that SDK update breaks the SV305 native support.
Now:
1. Will V4.0 64 Bit co-exist nicely with V4.1 latest build?
2. As an alternative to installing old software, Is it possible to include the older SDK in latest build and switch between them depending on which camera is detected or a user setting - or something?
Cheers
I decided to install the 32 bit versions figuring they would go to (x86) folder so less chance of conflict. I found out where the native stops working.
Version 4.1 32 bit is a no go for any version.
Version 4.0 32 bit Build 8682 released 14 Feb 2022 works with SV305 in native mode. Yippee.
Version 4.0 32 bit Build 8695 released 21 Feb 2022 does not, and the notes indicate SVBony SDK updated. So I believe that SDK update breaks the SV305 native support.
Now:
1. Will V4.0 64 Bit co-exist nicely with V4.1 latest build?
2. As an alternative to installing old software, Is it possible to include the older SDK in latest build and switch between them depending on which camera is detected or a user setting - or something?
Cheers
-
admin
- Site Admin
- Posts: 13448
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi,
can you first check that you have the latest version of the SVBony Windows system driver installed? An old version of that could give the sort of problems that you are seeing.
The latest download can be found here : https://www.svbony.com/support-software-driver/ - click 'Windows' on the left, then the camera driver is the top download.
Let me know if that helps,
cheers,
Robin
can you first check that you have the latest version of the SVBony Windows system driver installed? An old version of that could give the sort of problems that you are seeing.
The latest download can be found here : https://www.svbony.com/support-software-driver/ - click 'Windows' on the left, then the camera driver is the top download.
Let me know if that helps,
cheers,
Robin
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Robin
I had SVBony driver 1.3.6 installed as per details provided in my first two posts (other driver versions do not work at all - both older and newer).
I downloaded the latest version of the driver from SVBony's website, this is version 1.12.1 released 30 Nov 2023. I uninstalled 1.3.6 and installed 1.12.1 and checked 4.0 32 bit Build 8682 as it was still installed, and it still worked.
Then I upgraded to SharpCap 4.0.9571 32 bit, now the SV305 will not work (be detected natively) and the Direct Show version is not working either (not even detected). 4.1 64 bit latest version also does not detect the SV305 camera.
So using latest SVBony drivers, Latest SharpCap (64 bit) does not work, and the last release of SharpCap 4.0 32 bit also does not work with the SV305 camera.
Note I am running Win 10 64 bit.
Cheers
Phil
I had SVBony driver 1.3.6 installed as per details provided in my first two posts (other driver versions do not work at all - both older and newer).
I downloaded the latest version of the driver from SVBony's website, this is version 1.12.1 released 30 Nov 2023. I uninstalled 1.3.6 and installed 1.12.1 and checked 4.0 32 bit Build 8682 as it was still installed, and it still worked.
Then I upgraded to SharpCap 4.0.9571 32 bit, now the SV305 will not work (be detected natively) and the Direct Show version is not working either (not even detected). 4.1 64 bit latest version also does not detect the SV305 camera.
So using latest SVBony drivers, Latest SharpCap (64 bit) does not work, and the last release of SharpCap 4.0 32 bit also does not work with the SV305 camera.
Note I am running Win 10 64 bit.
Cheers
Phil
-
admin
- Site Admin
- Posts: 13448
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Phil,
OK, that's all starting to get a bit odd.
Can you test the status of the camera and its drivers using USBTreeViewer please? You can download this useful tool from : https://www.uwe-sieber.de/usbtreeview_e.html
Once running, it shows you lots of details about the USB devices plugged into your system, and the display of ports, hubs and devices on the left updates live as you connect/disconnect things. If you run USBTreeView and then plug in your camera, you should see 'SVBONY USB Camera' appear somewhere in the tree of devices on the left as it is plugged in. Then you can click on that and the right hand side gives you a report on the device, the drivers it is using and all sorts of other stuff.
For my SV305C, I get the info below - it will be interesting to see if yours has any significant differences.
cheers,
Robin
OK, that's all starting to get a bit odd.
Can you test the status of the camera and its drivers using USBTreeViewer please? You can download this useful tool from : https://www.uwe-sieber.de/usbtreeview_e.html
Once running, it shows you lots of details about the USB devices plugged into your system, and the display of ports, hubs and devices on the left updates live as you connect/disconnect things. If you run USBTreeView and then plug in your camera, you should see 'SVBONY USB Camera' appear somewhere in the tree of devices on the left as it is plugged in. Then you can click on that and the right hand side gives you a report on the device, the drivers it is using and all sorts of other stuff.
For my SV305C, I get the info below - it will be interesting to see if yours has any significant differences.
cheers,
Robin
Code: Select all
=========================== USB Port1 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 5-8-2-1
Properties : 0x00
IsUserConnectable : no
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no
ConnectionIndex : 1
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : SVBONY USB Camera
Device Path 1 : \\?\USB#VID_F266&PID_9A0A#a&1613e908&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Device Path 2 : \\?\USB#VID_F266&PID_9A0A#a&1613e908&0&1#{805510a6-54dc-4d9e-8f93-929a4bab6670}
Kernel Name : \Device\USBPDO-24
Device ID : USB\VID_F266&PID_9A0A\A&1613E908&0&1
Hardware IDs : USB\VID_F266&PID_9A0A&REV_0000 USB\VID_F266&PID_9A0A
Driver KeyName : {6bdd1fc6-810f-11d0-bec7-08002be2092f}\0001 (GUID_DEVCLASS_IMAGE)
Driver : \SystemRoot\System32\Drivers\SVBCameraDevice64.sys (Version: 6.1.7600.16385 Date: 2023-11-30)
Driver Inf : C:\windows\inf\oem41.inf
Legacy BusType : PNPBus
Class : Image
Class GUID : {6bdd1fc6-810f-11d0-bec7-08002be2092f} (GUID_DEVCLASS_IMAGE)
Service : SVBONY
Enumerator : USB
Location Info : Port_#0001.Hub_#0010
Location IDs : PCIROOT(0)#PCI(0201)#PCI(0000)#PCI(0C00)#PCI(0000)#USBROOT(0)#USB(8)#USB(2)#USB(1), ACPI(_SB_)#ACPI(PCI0)#ACPI(GPP7)#ACPI(UP00)#ACPI(DP60)#ACPI(XH00)#ACPI(RHUB)#ACPI(POT8)#USB(2)#USB(1)
Container ID : {7298162e-b3e9-11ee-8586-806e6f6e6963}
Manufacturer Info : SVBONY
Capabilities : 0x80 (SurpriseRemovalOK)
Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
HcDisableSelectiveSuspend: 0
EnableSelectiveSuspend : 0
SelectiveSuspendEnabled : 0
EnhancedPowerMgmtEnabled : 0
IdleInWorkingState : 1
WakeFromSleepState : 1
Power State : D2 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
+++++++++++++++++ Registry USB Flags +++++++++++++++++
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\F2669A0A0000
osvc : REG_BINARY 00 00
---------------- Connection Information ---------------
Connection Index : 0x01 (1)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01
Device Address : 0x0C (12)
Is Hub : 0x00 (no)
Device Bus Speed : 0x02 (High-Speed)
Number Of Open Pipes : 0x01 (1 pipe to data endpoints)
Pipe[0] : EndpointID=2 Direction=IN ScheduleOffset=0 Type=Bulk
Data (HexDump) : 01 00 00 00 12 01 00 02 00 00 00 40 66 F2 0A 9A ...........@f...
00 00 01 02 00 01 01 02 00 0C 00 01 00 00 00 01 ................
00 00 00 07 05 82 02 00 02 00 00 00 00 00 ..............
--------------- Connection Information V2 -------------
Connection Index : 0x01 (1)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes)
Usb200 : 1 (yes)
Usb300 : 0 (no)
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00
Data (HexDump) : 01 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.00)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0xF266
idProduct : 0x9A0A
bcdDevice : 0x0000
iManufacturer : 0x01 (String Descriptor 1)
iProduct : 0x02 (String Descriptor 2)
iSerialNumber : 0x00 (No String Descriptor)
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 40 66 F2 0A 9A 00 00 01 02 .......@f.......
00 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x0019 (25 bytes)
bNumInterfaces : 0x01 (1 Interface)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x00 (No String Descriptor)
bmAttributes : 0xA0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x00 (no)
D5: Remote Wakeup : 0x01 (yes)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0xFA (500 mA)
Data (HexDump) : 09 02 19 00 01 01 00 A0 FA 09 04 00 00 01 FF 00 ................
00 00 07 05 82 02 00 02 00 .........
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0xFF (Vendor Specific)
bInterfaceSubClass : 0x00
bInterfaceProtocol : 0x00
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 01 FF 00 00 00 .........
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x82 (Direction=IN EndpointID=2)
bmAttributes : 0x02 (TransferType=Bulk)
wMaxPacketSize : 0x0200 (max 512 bytes)
bInterval : 0x00 (never NAKs)
Data (HexDump) : 07 05 82 02 00 02 00 .......
----------------- Device Qualifier Descriptor -----------------
Error : ERROR_GEN_FAILURE
-------------------- String Descriptors -------------------
String descriptors are not available (because the device is in low power state)
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Robin
Here is my output:
Cheers
Phil
Here is my output:
Cheers
Phil
Code: Select all
=========================== USB Port4 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 2-4
Properties : 0x01
IsUserConnectable : yes
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no
ConnectionIndex : 0x04 (Port 4)
CompanionIndex : 0
CompanionHubSymLnk : USB#ROOT_HUB30#4&2d27cbbc&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
CompanionPortNumber : 0x14 (Port 20)
-> CompanionPortChain : 2-20
========================== Summary =========================
Vendor ID : 0xF266 (Unknown Vendor)
Product ID : 0x9A0A
USB Version : 2.0
Port maximum Speed : High-Speed (Companion Port 2-20 is doing the SuperSpeed)
Device maximum Speed : High-Speed
Device Connection Speed : High-Speed
Self powered : no
Demanded Current : 500 mA
Used Endpoints : 2
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : SVBONY USB Camera
Device Path 1 : \\?\USB#VID_F266&PID_9A0A#5&11eef136&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Device Path 2 : \\?\USB#VID_F266&PID_9A0A#5&11eef136&0&4#{805510a6-54dc-4d9e-8f93-929a4bab6670}
Kernel Name : \Device\USBPDO-6
Device ID : USB\VID_F266&PID_9A0A\5&11EEF136&0&4
Hardware IDs : USB\VID_F266&PID_9A0A&REV_0000 USB\VID_F266&PID_9A0A
Driver KeyName : {6bdd1fc6-810f-11d0-bec7-08002be2092f}\0002 (GUID_DEVCLASS_IMAGE)
Driver : \SystemRoot\System32\Drivers\SVBCameraDevice64.sys (Version: 6.1.7600.16385 Date: 2023-06-02 Company: Windows (R) Win 7 DDK provider)
Driver Inf : C:\Windows\inf\oem48.inf
Legacy BusType : PNPBus
Class : Image
Class GUID : {6bdd1fc6-810f-11d0-bec7-08002be2092f} (GUID_DEVCLASS_IMAGE)
Service : SVBONY
Enumerator : USB
Location Info : Port_#0004.Hub_#0001
Address : 4
Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(4), ACPI(_SB_)#ACPI(PCI0)#ACPI(XHC_)#ACPI(RHUB)#ACPI(HS04)
Container ID : {f005d305-027a-11ef-90f5-30e37af675fb}
Manufacturer Info : SVBONY
Capabilities : 0x84 (Removable, SurpriseRemovalOK)
Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
IdleInWorkingState : 1
WakeFromSleepState : 1
Power State : D2 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
+++++++++++++++++ Registry USB Flags +++++++++++++++++
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\F2669A0A0000
osvc : REG_BINARY 00 00
---------------- Connection Information ---------------
Connection Index : 0x04 (Port 4)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01 (Configuration 1)
Device Address : 0x05 (5)
Is Hub : 0x00 (no)
Device Bus Speed : 0x02 (High-Speed)
Number of open Pipes : 0x01 (1 pipe to data endpoints)
Pipe[0] : EndpointID=2 Direction=IN ScheduleOffset=0 Type=Bulk wMaxPacketSize=0x200 bInterval=0
Data (HexDump) : 04 00 00 00 12 01 00 02 00 00 00 40 66 F2 0A 9A ...........@f...
00 00 01 02 00 01 01 02 00 05 00 01 00 00 00 01 ................
00 00 00 07 05 82 02 00 02 00 00 00 00 00 ..............
--------------- Connection Information V2 -------------
Connection Index : 0x04 (4)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes, port supports USB 1.1)
Usb200 : 1 (yes, port supports USB 2.0)
Usb300 : 0 (no, port not supports USB 3.0) -> but Companion Port 2-20 does
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Device is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Device is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Device is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Device is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00
Data (HexDump) : 04 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.0)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0xF266 (Unknown Vendor)
idProduct : 0x9A0A
bcdDevice : 0x0000
iManufacturer : 0x01 (String Descriptor 1)
iProduct : 0x02 (String Descriptor 2)
iSerialNumber : 0x00 (No String Descriptor)
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 40 66 F2 0A 9A 00 00 01 02 .......@f.......
00 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x0019 (25 bytes)
bNumInterfaces : 0x01 (1 Interface)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x00 (No String Descriptor)
bmAttributes : 0xA0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x00 (no)
D5: Remote Wakeup : 0x01 (yes)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0xFA (500 mA)
Data (HexDump) : 09 02 19 00 01 01 00 A0 FA 09 04 00 00 01 FF 00 ................
00 00 07 05 82 02 00 02 00 .........
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00 (Interface 0)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0xFF (Vendor Specific)
bInterfaceSubClass : 0x00
bInterfaceProtocol : 0x00
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 01 FF 00 00 00 .........
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x82 (Direction=IN EndpointID=2)
bmAttributes : 0x02 (TransferType=Bulk)
wMaxPacketSize : 0x0200 (max 512 bytes)
bInterval : 0x00 (never NAKs)
Data (HexDump) : 07 05 82 02 00 02 00 .......
----------------- Device Qualifier Descriptor -----------------
Error : ERROR_GEN_FAILURE (because the device is in low power state)
-------------------- String Descriptors -------------------
String descriptors are not available (because the device is in low power state)
-
admin
- Site Admin
- Posts: 13448
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Phil,
OK, all looking pretty reasonable there - I think that the bulk of the differences from mine are either related to USB port numbers (not significant) or because you have yours plugged into a USB3 port (again, shouldn't make a difference). It looks like the driver is loaded correctly and the same hardware identifiers too, so SharpCap should detect it OK in theory.
Next thing is to check the SharpCap log to see if there is anything unusual happening during the camera detection on startup - make sure you have the latest SharpCap 4.1 and with the camera plugged in, run SharpCap. Once SharpCap is finished loading up, go to Help menu, then Show Log, then copy all the text in the log at that point and post it here. If there are any 'Warning' or 'Error' lines that might be an indicator of something going wrong with camera detection.
thanks,
Robin
OK, all looking pretty reasonable there - I think that the bulk of the differences from mine are either related to USB port numbers (not significant) or because you have yours plugged into a USB3 port (again, shouldn't make a difference). It looks like the driver is loaded correctly and the same hardware identifiers too, so SharpCap should detect it OK in theory.
Next thing is to check the SharpCap log to see if there is anything unusual happening during the camera detection on startup - make sure you have the latest SharpCap 4.1 and with the camera plugged in, run SharpCap. Once SharpCap is finished loading up, go to Help menu, then Show Log, then copy all the text in the log at that point and post it here. If there are any 'Warning' or 'Error' lines that might be an indicator of something going wrong with camera detection.
thanks,
Robin
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Robin
I will get that to you soon.
Interestingly, I bought a new SV305Pro for the increased speed hopefully for better lucky imaging. SharpCap 4.1 latest detected it first up - it is a USB3 camera, so maybe that makes a difference.
I could try a USB2 hub to see if that works I guess.
I do have a case open with SVBony - I think I will point them to this thread.
Cheers
Phil
I will get that to you soon.
Interestingly, I bought a new SV305Pro for the increased speed hopefully for better lucky imaging. SharpCap 4.1 latest detected it first up - it is a USB3 camera, so maybe that makes a difference.
I could try a USB2 hub to see if that works I guess.
I do have a case open with SVBony - I think I will point them to this thread.
Cheers
Phil
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi Robin
Here are the logs. I plugged the old SV305 in and then started SharpCap.
Looks like the SV305 is not being detected by the SVBonyDeviceEnumerator code.
Phil
Here are the logs. I plugged the old SV305 in and then started SharpCap.
Looks like the SV305 is not being detected by the SVBonyDeviceEnumerator code.
Phil
Code: Select all
Info 17:35:41.283831 #1 Starting SharpCap v4.1.12100.0 (X64, 64 bit) at 2024-04-30T17:35:41.2456869+10:00 in void SharpCap.Program.Main()
Info 17:35:41.303711 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 17:35:41.362814 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:35:41.390030 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 17:35:41.392797 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 17:35:41.459288 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 17:35:41.465427 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:35:41.468654 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:35:41.651002 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.651199 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.651335 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.651473 #1 Added device enumerator of type AltairDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.651771 #1 Added device enumerator of type SVBonyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.651894 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.654660 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 17:35:41.668331 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 17:35:41.668499 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.668662 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669172 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669286 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669388 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669491 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669615 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669710 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669808 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.669905 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.670055 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.670160 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.670255 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.670400 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:35:41.751208 #1 Application object created for SharpCap Pro (v4.1.12100, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 17:35:41.752129 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 17:35:41.753950 #1 UI culture is en-AU in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 17:35:41.841670 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 17:35:41.908106 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 17:35:42.020092 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:35:42.194116 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 17:35:42.198894 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 17:35:42.210196 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:35:42.210523 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:35:42.210726 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 17:35:42.211144 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:35:42.218019 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Debug 17:35:42.578537 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 17:35:42.579033 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 17:35:42.803367 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 17:35:43.053392 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 17:35:43.212435 #25 =='Enumerate Basler Devices' (New Thread)
Info 17:35:43.212516 #25 Problem enumerating Basler devices - the Pylon SDK is probably not installed (or is the wrong version) (External component has thrown an exception.) in IEnumerable<ICameraInfo> SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetEnumeratedDevices()
Info 17:35:43.291671 #17 =='.NET ThreadPool Worker' (New Thread)
Info 17:35:43.291750 #17 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 17:35:43.478102 #12 =='LogInfo Thread' (New Thread)
Info 17:35:43.478179 #12 AvailablePhysicalMemory: 25167Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478268 #12 AVSoftware: Bitdefender Antivirus in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478353 #12 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478435 #12 Culture: en-AU in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478517 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478598 #12 GCMemory: 20Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478679 #12 GraphicsCard: Intel(R) HD Graphics 630, v22.20.16.4708 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478764 #12 InstallationId: f8d39a0c-390e-444d-a67c-1f3b5eeaedc0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478844 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.478924 #12 OSEdition: Microsoft Windows 10.0.19045 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479005 #12 OSFullVersion: 10.0.19045 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479088 #12 OSProductType: 0x6 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479169 #12 OSVersion: Microsoft Windows NT 10.0.19045.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479250 #12 Path: C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v11.8\bin;C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v11.8\libnvvp;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Program Files\PuTTY\;C:\Program Files\Arduino CLI\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v10.1\bin;C:\Program Files\NVIDIA Corporation\Nsight Compute 2022.3.0\;C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR;C:\Program Files\WinMerge;C:\Users\phili\AppData\Local\Microsoft\WindowsApps;;C:\Users\phili\AppData\Local\Programs\Microsoft VS Code\bin;C:\Program Files (x86)\Nmap;C:\Astro Programs\GraXpert\ in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479333 #12 ProcessMemory: 278Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479413 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479494 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479574 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479655 #12 SharpCapVersion: 4.1.12100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479750 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479831 #12 SystemMemory: 32618Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479911 #12 TimeUTC: 2024-04-30T07:35:41.4668765Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.479992 #12 TimeZone: E. Australia Standard Time (UTC + 10:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.480074 #12 WindowsMediaVersion: 12.0.19041.3636 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.480154 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:35:43.557090 #22 =='.NET ThreadPool Worker' (New Thread)
Debug 17:35:43.557134 #22 Alpaca discovery completed in 1986ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 17:35:44.149641 #1 BaslerDeviceEnumerator detected no devices in 157.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.150221 #1 QHYDeviceEnumerator detected no devices in 1085.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.150485 #1 ASIDeviceEnumerator detected no devices in 80.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.150726 #1 AltairDeviceEnumerator detected no devices in 90.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.150954 #1 SVBonyDeviceEnumerator detected no devices in 34.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.151210 #1 SxDeviceEnumerator detected no devices in 4.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.151449 #1 PointGreyDeviceEnumerator detected no devices in 608.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.151679 #1 AstCamPanDeviceEnumerator detected no devices in 76.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.151904 #1 AstroAsisDeviceEnumerator detected no devices in 14.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.152224 #1 CelestronDeviceEnumerator detected no devices in 267.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.152470 #1 MoravianDeviceEnumerator detected no devices in 78.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.152700 #1 AtikDeviceEnumerator detected no devices in 201.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.152943 #1 P1DeviceEnumerator detected no devices in 14.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.153168 #1 ToupTekDeviceEnumerator detected no devices in 204.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.153402 #1 OgmaDeviceEnumerator detected no devices in 138.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.153710 #1 MeadeDeviceEnumerator detected no devices in 138.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.153936 #1 MallincamDeviceEnumerator detected no devices in 156.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.154948 #1 Detected Camera: SVBONY SV305 (DirectShow Cameras, ) in 98.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.155520 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 319.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.155855 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 319.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.156119 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 319.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.156366 #1 Detected Camera: SVBONY Camera (ASCOM Cameras, ) in 319.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.156762 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.157099 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 6.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.157369 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 6.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:35:44.158065 #1 Camera scan completed in 1104ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 17:35:44.168417 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 17:35:44.251708 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.253689 #1 Found device ZWO FilterWheel (1) in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.253907 #1 Found device ZWO FilterWheel (2) in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.254098 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.254261 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.255751 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.334452 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.335192 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.410448 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.415208 #1 Found device ASI Mount in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.415888 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.430002 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.430759 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.431037 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.431247 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.465376 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.466381 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.495349 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.496254 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.496408 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.526674 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.527589 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:35:44.570589 #1 SharpCap startup complete in 3324ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 17:35:52.295983 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 17:35:52.346976 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
-
philinbris
- Posts: 41
- Joined: Sat Sep 26, 2020 10:43 pm
Re: SVBony SV305 (Older Non Pro) not natively detected
Hi again
In contrast - here are the logs from the new SV305PRO camera.
Cheers
Phil
In contrast - here are the logs from the new SV305PRO camera.
Cheers
Phil
Code: Select all
Info 17:41:07.380538 #1 Starting SharpCap v4.1.12100.0 (X64, 64 bit) at 2024-04-30T17:41:07.3431625+10:00 in void SharpCap.Program.Main()
Info 17:41:07.400339 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Debug 17:41:07.460479 #1 Started void SharpCap.Program.RunApp(CommandLineArgs args) in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:41:07.487863 #1 Win 10 Creators update (or higher) detected, setting DPI AWARE V2 in void SharpCap.UISwitcher.SetupDPIAwareness()
Info 17:41:07.490659 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 17:41:07.540298 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 17:41:07.545349 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:41:07.547128 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 17:41:07.730824 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.731035 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.731180 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.731340 #1 Added device enumerator of type AltairDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.731647 #1 Added device enumerator of type SVBonyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.731792 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.738286 #1 Probing for camera providers : C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.Cameras.PointGrey.dll in void SharpCap.Base.InterfaceFactory<TInter, TAttr>.ScanDll(string filename)
Info 17:41:07.745429 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvidersByReflection(string dllName)
Info 17:41:07.745580 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.745698 #1 Added device enumerator of type AstroAsisDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746289 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746424 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746538 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746659 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746794 #1 Added device enumerator of type ToupTekDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.746905 #1 Added device enumerator of type OgmaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747013 #1 Added device enumerator of type MeadeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747122 #1 Added device enumerator of type MallincamDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747288 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747403 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747508 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.747617 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 17:41:07.833497 #1 Application object created for SharpCap Pro (v4.1.12100, 64 bit) in new SharpCap.Models.Application(IDisableableWindow parentWindow, bool skipAdvancedCaptureProviders, IPlateSolveFactory plateSolveFactory)
Info 17:41:07.834586 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 17:41:07.836347 #1 UI culture is en-AU in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 17:41:07.937104 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs, Stopwatch swStartup)
Info 17:41:08.005245 #1 Changing night mode to True in void SharpCap.UI.NightModeBase.set_Enabled(bool value)
Debug 17:41:08.119202 #1 Started new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:41:08.283632 #1 Requesting creation of None transform in object SharpCap.Models.Transform.CreateInUIThread()
Info 17:41:08.286498 #1 Created None transform in object SharpCap.Models.Transform.CreateInUIThread()+() => { }
Info 17:41:08.296692 #1 Preview host created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:41:08.297246 #1 Creating control form in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:41:08.297520 #1 Control Form created in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Debug 17:41:08.297742 #1 Ended new SharpCap.New.MainWindow(SharpCapViewModel viewModel) in new SharpCap.New.MainWindow(SharpCapViewModel viewModel)
Info 17:41:08.306467 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Debug 17:41:08.660173 #1 Started void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 17:41:08.660575 #1 Ended void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e) in void SharpCap.New.MainWindow.MainWindow_OnLoaded(object sender, RoutedEventArgs e)
Debug 17:41:08.868132 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 17:41:08.976596 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 17:41:09.138470 #26 =='Enumerate Basler Devices' (New Thread)
Info 17:41:09.138554 #26 Problem enumerating Basler devices - the Pylon SDK is probably not installed (or is the wrong version) (External component has thrown an exception.) in IEnumerable<ICameraInfo> SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetEnumeratedDevices()
Info 17:41:09.199701 #17 =='.NET ThreadPool Worker' (New Thread)
Info 17:41:09.199813 #17 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll' or one of its dependencies: The specified module could not be found. (0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 17:41:09.639779 #22 =='.NET ThreadPool Worker' (New Thread)
Debug 17:41:09.639817 #22 Alpaca discovery completed in 1993ms in void SharpCap.Base.AlpacaFinder._disco_DiscoveryCompleted(object sender, EventArgs e)
Info 17:41:09.848309 #12 =='LogInfo Thread' (New Thread)
Info 17:41:09.848380 #12 AvailablePhysicalMemory: 25103Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848469 #12 AVSoftware: Bitdefender Antivirus in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848558 #12 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz with 8 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848639 #12 Culture: en-AU in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848719 #12 CurrentDirectory: C:\Program Files\SharpCap 4.1 (64 bit) in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848803 #12 GCMemory: 20Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848883 #12 GraphicsCard: Intel(R) HD Graphics 630, v22.20.16.4708 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.848962 #12 InstallationId: f8d39a0c-390e-444d-a67c-1f3b5eeaedc0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849042 #12 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849122 #12 OSEdition: Microsoft Windows 10.0.19045 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849202 #12 OSFullVersion: 10.0.19045 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849283 #12 OSProductType: 0x6 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849363 #12 OSVersion: Microsoft Windows NT 10.0.19045.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849445 #12 Path: C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v11.8\bin;C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v11.8\libnvvp;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Program Files\PuTTY\;C:\Program Files\Arduino CLI\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v10.1\bin;C:\Program Files\NVIDIA Corporation\Nsight Compute 2022.3.0\;C:\Program Files\NVIDIA Corporation\NVIDIA NvDLISR;C:\Program Files\WinMerge;C:\Users\phili\AppData\Local\Microsoft\WindowsApps;;C:\Users\phili\AppData\Local\Programs\Microsoft VS Code\bin;C:\Program Files (x86)\Nmap;C:\Astro Programs\GraXpert\ in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849532 #12 ProcessMemory: 272Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849613 #12 ProcessorCount: 8 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849693 #12 SharpCapBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849773 #12 SharpCapExecutablePath: C:\Program Files\SharpCap 4.1 (64 bit)\SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849852 #12 SharpCapVersion: 4.1.12100.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.849933 #12 SoftwareRendering: False in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.850013 #12 SystemMemory: 32618Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.850092 #12 TimeUTC: 2024-04-30T07:41:07.5466355Z in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.850172 #12 TimeZone: E. Australia Standard Time (UTC + 10:00:00) in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.850253 #12 WindowsMediaVersion: 12.0.19041.3636 in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:09.850410 #12 SharpCap is able to detect/report crashes caused by external code and camera SDKs in void SharpCap.LogSystemInfo.ThreadProc()
Info 17:41:10.019345 #1 BaslerDeviceEnumerator detected no devices in 159.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.019793 #1 QHYDeviceEnumerator detected no devices in 1034.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.020021 #1 ASIDeviceEnumerator detected no devices in 80.7ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.020243 #1 AltairDeviceEnumerator detected no devices in 95.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.021038 #1 Detected Camera: SVBONY SV305PRO (SVBony Cameras, 01230A16D10B1653EE2310180011) in 50.0ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.021349 #1 SxDeviceEnumerator detected no devices in 4.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.021569 #1 PointGreyDeviceEnumerator detected no devices in 574.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.021783 #1 AstCamPanDeviceEnumerator detected no devices in 78.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.021986 #1 AstroAsisDeviceEnumerator detected no devices in 18.5ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.022195 #1 CelestronDeviceEnumerator detected no devices in 260.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.022399 #1 MoravianDeviceEnumerator detected no devices in 140.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.022607 #1 AtikDeviceEnumerator detected no devices in 170.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.022809 #1 P1DeviceEnumerator detected no devices in 12.8ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.023011 #1 ToupTekDeviceEnumerator detected no devices in 178.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.023220 #1 OgmaDeviceEnumerator detected no devices in 126.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.023532 #1 MeadeDeviceEnumerator detected no devices in 124.6ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.023738 #1 MallincamDeviceEnumerator detected no devices in 80.2ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.024135 #1 Detected Camera: SVBONY SV305PRO (DirectShow Cameras, ) in 79.4ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.024462 #1 Detected Camera: ASI Camera (1) (ASCOM Cameras, ) in 519.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.024721 #1 Detected Camera: ASI Camera (2) (ASCOM Cameras, ) in 519.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.024920 #1 Detected Camera: Camera V3 simulator (ASCOM Cameras, ) in 519.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.025118 #1 Detected Camera: SVBONY Camera (ASCOM Cameras, ) in 519.1ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.025405 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in 0.3ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.025665 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in 8.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.025874 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in 8.9ms in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator, TimeSpan timeSpan)
Info 17:41:10.026426 #1 Camera scan completed in 1049ms in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 17:41:10.035467 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 17:41:10.142945 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.147090 #1 Found device ZWO FilterWheel (1) in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.147531 #1 Found device ZWO FilterWheel (2) in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.147879 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.148249 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.151703 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.227051 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.227304 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.294353 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.298545 #1 Found device ASI Mount in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.299097 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.299675 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.301109 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.301662 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.302168 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.349833 #1 Loading Hardware Proxies from SharpCap.RotatorProxy.ASCOM.RotatorFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.351399 #1 Found device Rotator Simulator .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.384737 #1 Loading Hardware Proxies from SharpCap.SwitchProxy.ASCOM.SwitchFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.388036 #1 Found device ASCOM SwitchV2 Simulator Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.388686 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.428386 #1 Loading Hardware Proxies from SharpCap.CoverProxy.ASCOM.CoverFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.430033 #1 Found device ASCOM CoverCalibrator Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 17:41:10.491068 #1 SharpCap startup complete in 3147ms in void SharpCap.UI.MainWindowSupport.OnShown(IWindowOrForm parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 17:41:11.905261 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()
Info 17:41:11.960272 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.ExecuteAsync()