Hi all,
I have a problem with the plate solving in Sharpcap.
All is set as it should, I request a goto with Stellarium, center the target to the sensor, sync position, and launch a plate solving & recenter but I always get a slight offset applied.
The offset is always the same, function to the target location.
It's not backlash.
I made some research and find something interesting about JNOW and J2000 from ASCOM driver, but impossible to find a setting.
Attached is the log during the "bug" if needed.
Any idea ?
Thanks
Onstep ASCOM, Stellarium, Sharpcap and plate solving
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
Onstep ASCOM, Stellarium, Sharpcap and plate solving
- Attachments
-
- Log_2024-03-10T00_02_33-7704.log
- (792.39 KiB) Downloaded 15 times
Re: Onstep ASCOM, Stellarium, Sharpcap and plate solving
I founded a setting in Stellarium that allows to use JNOW.
In telescope settings.
Problem solved.
In telescope settings.
Problem solved.
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Onstep ASCOM, Stellarium, Sharpcap and plate solving
Hi,
yes, that will sort it - most telescope mount drivers run in JNOW, so if they are sent J2000 co-ordinates there will be a small offset. SharpCap will correct for this automatically when the co-ordinates are entered via SharpCap or you pick a target from the SharpCap catalog, but can't do that when the movement is coming from Stellarium or similar.
cheers,
Robin
yes, that will sort it - most telescope mount drivers run in JNOW, so if they are sent J2000 co-ordinates there will be a small offset. SharpCap will correct for this automatically when the co-ordinates are entered via SharpCap or you pick a target from the SharpCap catalog, but can't do that when the movement is coming from Stellarium or similar.
cheers,
Robin