Can we please get a kill switch for the "simple sequence"? When I image the planets, I usually set it up to record say 50 runs. Not a problem if everything works out, but a pain in the hole if the clouds roll in after 10. If I click cancel, it will only cancel the current one, then automatically start the next one. So I have to click the cancel button 40 times!!!! This is REALLY annoying!
Thanks!
Kill switch
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
- admin
- Site Admin
- Posts: 13370
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Kill switch
Hi,
if you don't have time to press the 'Cancel' button while waiting for the next in the sequence to run, then pressing and holding the <ESC> button will do the trick. See https://docs.sharpcap.co.uk/4.1/#!2!Stop%20Capture
cheers,
Robin
if you don't have time to press the 'Cancel' button while waiting for the next in the sequence to run, then pressing and holding the <ESC> button will do the trick. See https://docs.sharpcap.co.uk/4.1/#!2!Stop%20Capture
cheers,
Robin
Re: Kill switch
I must have missed that, I did go looking! Thanks! This one was driving me nuts