Hi ,,,
i was trying the Sensor Analysis on my new ZWO asi 183mc pro, so i Start the Sensor Analysis procedure but i can not finish it , it takes for ever i do not know what i do ??:
so if anyone can help me on this problem
sam
Sensor Analysis problem with asi 183mc Pro
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sensor Analysis problem with asi 183mc Pro
Hi,
at what stage does it get stuck? (What are the messages showing and what exposure /gain are set). One problem is that if the initial light level is too low then some steps can requre very long exposure (several seconds), so the whole procedure can take a long time. Sometimes you have to set the light level so the initial exposure is about 1-2ms to avoid this problem.
Robin
at what stage does it get stuck? (What are the messages showing and what exposure /gain are set). One problem is that if the initial light level is too low then some steps can requre very long exposure (several seconds), so the whole procedure can take a long time. Sometimes you have to set the light level so the initial exposure is about 1-2ms to avoid this problem.
Robin
Re: Sensor Analysis problem with asi 183mc Pro
Dear Robinadmin wrote: ↑Thu May 17, 2018 6:00 pm Hi,
at what stage does it get stuck? (What are the messages showing and what exposure /gain are set). One problem is that if the initial light level is too low then some steps can require very long exposure (several seconds), so the whole procedure can take a long time. Sometimes you have to set the light level so the initial exposure is about 1-2ms to avoid this problem.
Robin
the stage that get stuck in the 3 part ( after uncover for the dark's ) , for the exposure and gain i set the default , can you please demonstrate for me procedure , i am using the new color cool (zwo asi 183mc pro), and what do you Recommend for the camera setting would like to to use the Smart Histogram for image deep sky objects
1-what is the best driver for using with ZWO ???
2- Do i do Debayer for the image ??
Waiting for you support
Best Regards
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sensor Analysis problem with asi 183mc Pro
What driver should you use? The one nearest the top of the menu - see https://docs.sharpcap.co.uk/2.9/#Cameras
Should you use debayer for sensor analysis? Yes, so that the code knows which colour pixels are which (on colour cameras it does the analysis on only the green pixels, but needs to know which are the green pixels, so debayer must be set correctly).
Please see this video tutorial for info on using the sensor analysis - viewtopic.php?f=35&t=801 - if you are still stuck then please include a screenshot of where you get stuck.
thanks,
Robin
Should you use debayer for sensor analysis? Yes, so that the code knows which colour pixels are which (on colour cameras it does the analysis on only the green pixels, but needs to know which are the green pixels, so debayer must be set correctly).
Please see this video tutorial for info on using the sensor analysis - viewtopic.php?f=35&t=801 - if you are still stuck then please include a screenshot of where you get stuck.
thanks,
Robin
Re: Sensor Analysis problem with asi 183mc Pro
Dear Robinadmin wrote: ↑Fri May 18, 2018 7:29 pm What driver should you use? The one nearest the top of the menu - see https://docs.sharpcap.co.uk/2.9/#Cameras
Should you use debayer for sensor analysis? Yes, so that the code knows which colour pixels are which (on colour cameras it does the analysis on only the green pixels, but needs to know which are the green pixels, so debayer must be set correctly).
Please see this video tutorial for info on using the sensor analysis - viewtopic.php?f=35&t=801 - if you are still stuck then please include a screenshot of where you get stuck.
thanks,
Robin
Thank you
to by clear up on the drives, do i use ASCOM driver or DirectShow cameras , for DirectShow camera driver there two one by ZWO
regards
sam
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sensor Analysis problem with asi 183mc Pro
Hi Sam,
neither ASCOM or DirectShow - the camera should appear in a 'ZWO ASI Cameras' section near the top of the menu like this
If you are not seeing that section the you probably need to update your ZWO driver and/or SharpCap to the very latest version.
thanks,
Robin
neither ASCOM or DirectShow - the camera should appear in a 'ZWO ASI Cameras' section near the top of the menu like this
If you are not seeing that section the you probably need to update your ZWO driver and/or SharpCap to the very latest version.
thanks,
Robin