Hi,
I want to know if it is possible to perform a sensor analysis for gains of my interest only. I know I can add gains to the performed analysis, with the SharpCap.SelectedCamera.SetGainsOfInterestForSensorAnalysis([]) command, but is there also a command to perform an analysis only for gains a, b, c and d?
Sensor Analysis for specific gains only
- admin
- Site Admin
- Posts: 13483
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sensor Analysis for specific gains only
Hi,
no, unfortunately not - SharpCap will do a pre-measurement of the camera gain response and pick a roughly evenly spread range of gain values to test. To those it will add values each side of the camera HCG/LCG switchover point if known. You can add to those values, but not override or remove the default ones.
cheers,
Robin
no, unfortunately not - SharpCap will do a pre-measurement of the camera gain response and pick a roughly evenly spread range of gain values to test. To those it will add values each side of the camera HCG/LCG switchover point if known. You can add to those values, but not override or remove the default ones.
cheers,
Robin