Hi,
I've got the Meade LPI-G Advanced monochrome camera and I use it in ASCOM mode.
I am trying to use it along with the Manual ZWO filter wheel and see the live stack while created, for example:
1. Start with one minute with the Red filter and see the stack in Red.
2. Pause and start one minute with the Green filter and watch the images continue to stack with the previous red stack (the stacked image will become somewhat Brown).
3. Pause and start the third minute of stacking minute with the Bluen filter and watch the images continue to stack with the previous 'brawn' stack.
After minutes I hoped to have the RGB stack.
However as the Maed LPI-G is a grayscale camera, I only see Grayscale images. Is there a way to see the combined RGB image, live?
Thanks,
Ehud.
Live RGB stack using a Color wheel
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Live RGB stack using a Color wheel
Hi,
no, sadly this feature doesn't exist yet (although at some point in the future I would like to add it).
cheers,
Robin
no, sadly this feature doesn't exist yet (although at some point in the future I would like to add it).
cheers,
Robin
Re: Live RGB stack using a Color wheel
Thanks Robin.
I believe in Live results rather than post-processing' and am looking forward to being able to do live stacking using a color wheel!
I believe in Live results rather than post-processing' and am looking forward to being able to do live stacking using a color wheel!