Hi,
I use typically three cameras - an OSC for imaging, one for guiding, and another as a finder. But switching from one to another, SharpCap seems to only have one set of settings which it tries to apply, notably:
- zoom,
- crosshairs (on/off and position),
- exposure,
- gain,
- colour balance.
Is it possible to make it remember the settings when switching from one camera to another and back again ? Its kind of tedious having to reset zoom, gain and exposure every time, especially.
Save settings for each camera ?
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13349
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Save settings for each camera ?
Hi,
you can have completely separate sets of SharpCap settings by using the /instance command line option. See this recent thread for info on how it works and how to create the shortcuts with the command line parameter applied : viewtopic.php?p=38324#p38324
cheers,
Robin
you can have completely separate sets of SharpCap settings by using the /instance command line option. See this recent thread for info on how it works and how to create the shortcuts with the command line parameter applied : viewtopic.php?p=38324#p38324
cheers,
Robin
Re: Save settings for each camera ?
That's a pretty clunky way to do it. Hmmm.
well so be it, pity.
well so be it, pity.