With every new object I do a "Plate Solve Only" followed with a "Deep Sky Image Annotation".
Therefore I must click twice at the Tools button to select the 2 actions.
Is it possible to have a new Tool action which combinates both actions?
Thanks in advance considering this.
Greetings.
Plate Solve Only & Deep Sky Image Annotation
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
Plate Solve Only & Deep Sky Image Annotation
Roel
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
- admin
- Site Admin
- Posts: 13479
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Plate Solve Only & Deep Sky Image Annotation
Hi Roel,
I'm not really keen on adding another tool menu item for that combination, but if you do 'Deep Sky Image annotation' first from the tools menu then you can kick off the plate solve by either
* Double clicking on the image while annotation is active
* Using the 'Plate Solve' buttons at the bottom of the annotation results window.
cheers,
Robin
I'm not really keen on adding another tool menu item for that combination, but if you do 'Deep Sky Image annotation' first from the tools menu then you can kick off the plate solve by either
* Double clicking on the image while annotation is active
* Using the 'Plate Solve' buttons at the bottom of the annotation results window.
cheers,
Robin