Robin-
I tried using Beta 4.1.10856 64 bit today but received a command string error regarding connecting to my OnStep mount (ascom driver 1.0.23). I have been using the 4.0.9562 (64 bit) release with no issues and when tried today connected without a hitch. Unfortunately I did not save that error message. I saw that there is a newer ascom driver for OnStep (1.0.31), so I downloaded and installed it. It connects perfectly to 4.0.9562 (64 bit) and also connects to NINA. However, I get an error message when using Beta 4.1.10856. This time I saved the error messages screen shots (yay!). I will attach the screenshots and the log file below. I did not have the focuser connected so the log file shows an error for that also. The focuser is not a problem.
I have restarted my laptop and the mount several times since updating the ascom driver with no change.
Thanks for your attention,
Chuck
Beta 4.1.10856 64 bit will not connect to OnStep mount
Beta 4.1.10856 64 bit will not connect to OnStep mount
- Attachments
-
- Log_2023-06-30T13_05_30-13468.log
- (113.73 KiB) Downloaded 27 times
-
- screenshot_20230630_130432.png (125.21 KiB) Viewed 323 times
-
- screenshot_20230630_130031.png (74.39 KiB) Viewed 323 times
Re: Beta 4.1.10856 64 bit will not connect to OnStep mount
Robin--
Ooops!.. Looks like you worked on this and found the issue an hour ago. I had not read the post as it mentioned bluetooth in the subject, but the error messages appear identical. I will wait for Mondays release and report results.
Thanks,
Chuck
Ooops!.. Looks like you worked on this and found the issue an hour ago. I had not read the post as it mentioned bluetooth in the subject, but the error messages appear identical. I will wait for Mondays release and report results.
Thanks,
Chuck
Re: Beta 4.1.10856 64 bit will not connect to OnStep mount
Robin-
SharpCap 4.1 Beta 64 bit is now recognizing and connecting to my OnStep mount again as of v.4.1.10872 (released 7/3/2023).
Thanks,
Chuck
SharpCap 4.1 Beta 64 bit is now recognizing and connecting to my OnStep mount again as of v.4.1.10872 (released 7/3/2023).
Thanks,
Chuck