Hi Robin,
I just purchased a new cooled camera and it added the cooling information to the status bar below.
By adding this info, it truncated part of the right side my frame progress.
How do I adjust the scale/ font size so all info is displayed?
Thanks much,
John
How to adjust scale of status bar
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: How to adjust scale of status bar
Hi John,
you can't adjust the font size, sorry.
I do try to keep things so that everything will show correctly with following screen settings :
1280 width, 100% windows font sizing
I think that is probably a realistic minimum for modern systems. It could be that I have been tweaking things and not spotted that this is no longer correct, so I will chect. It would be interesting to know your screen resolution and windows font size settings so I can test your particular configuration.
cheers,
Robin
you can't adjust the font size, sorry.
I do try to keep things so that everything will show correctly with following screen settings :
1280 width, 100% windows font sizing
I think that is probably a realistic minimum for modern systems. It could be that I have been tweaking things and not spotted that this is no longer correct, so I will chect. It would be interesting to know your screen resolution and windows font size settings so I can test your particular configuration.
cheers,
Robin
-
- Posts: 56
- Joined: Sat Oct 01, 2022 6:02 pm
Re: How to adjust scale of status bar
Hi Robin,
My scale was set for 150%.
Reduced it to 125% and everything is A ok.
Thanks very much,
John
My scale was set for 150%.
Reduced it to 125% and everything is A ok.
Thanks very much,
John
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: How to adjust scale of status bar
Hi John,
good to hear that the font size helped. I have also tweaked things a bit for today's release to try to pretty much get everything in view on a 1280 wide screen. It looks like I made things too wide when I added disk space to the info being shown a month or two back
You might be able to go back to 150% fonts with the new update...
cheers,
Robin
good to hear that the font size helped. I have also tweaked things a bit for today's release to try to pretty much get everything in view on a 1280 wide screen. It looks like I made things too wide when I added disk space to the info being shown a month or two back
You might be able to go back to 150% fonts with the new update...
cheers,
Robin