Hi Konrad,
I deliberately bitshift 10,12 and 14 bit images from all types of camera up to the full 16 bit range. If I didn't do that I would be overwhelmed with new camera owners complaining that the images they have just saved are all 'black'...
If you look closely at the 16 bit data, you will find that the lowest 4 bits will all be zero
cheers,
Robin
Problem with Basler dart camera
- admin
- Site Admin
- Posts: 13448
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Problem with Basler dart camera
Hi,
I looked into the ROI movement on Basler cameras, and it seems to work (at least for the model I have here). It might be worth testing with Basler Pylon to check that the X Offset and Y Offset controls in the 'AOI Controls' section of Pylon work as expected once a smaller size is selected. You need to turn off 'Center X' and 'Center Y' as they override the position, but SharpCap does that automatically.
cheers,
Robin
I looked into the ROI movement on Basler cameras, and it seems to work (at least for the model I have here). It might be worth testing with Basler Pylon to check that the X Offset and Y Offset controls in the 'AOI Controls' section of Pylon work as expected once a smaller size is selected. You need to turn off 'Center X' and 'Center Y' as they override the position, but SharpCap does that automatically.
cheers,
Robin