After successful C3/C1x update for short exposures, I´m back with one old issue yet. It is overflow of the values in bright area, when in binning mode 2x2 and more. There is no problem in firmware or DLL itself, because when teh same DLL is used in our SW, all is OK.
You have to take in account, so in binning mode, returned values are pure sum (not average) and bith depth is increased accordingly. You probably only crop the data to 12 bit range ?
Moravian C1-XXXX, smaller cameras with gXusb.dll in SDK
- admin
- Site Admin
- Posts: 13497
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Moravian C1-XXXX, smaller cameras with gXusb.dll in SDK
Hi,
yes, that sounds like the most likely cause, but... do we know if that is the same behaviour for all cameras, or do I have to have some sort of condition which applies less shift for some cameras in binning mode and not others?
cheers,
Robin
yes, that sounds like the most likely cause, but... do we know if that is the same behaviour for all cameras, or do I have to have some sort of condition which applies less shift for some cameras in binning mode and not others?
cheers,
Robin
Re: Moravian C1-XXXX, smaller cameras with gXusb.dll in SDK
I think so this apply to all small CMOS cameras, supported by gXusb.dll. The latest, based on cXusb.dll are OK. But can ask manufacturer.