Would it be possible to use the annotation catalogs that you have provided and those I have installed for this Goto feature?
Don
Goto Co-ordinates in Tools
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Goto Co-ordinates in Tools
Hi Don,
isn't this already there? Press the 'More...' button next to the short list of targets to select from a much longer list that I think includes your custom targets too.
cheers,
Robin
isn't this already there? Press the 'More...' button next to the short list of targets to select from a much longer list that I think includes your custom targets too.
cheers,
Robin
Re: Goto Co-ordinates in Tools
Clicked on More and Select a Target window opened and after a bit an error window came up asking if I wanted to wait for SC or Close etc.
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Goto Co-ordinates in Tools
Hi,
I think the problem is too many targets in your custom lists. It tries to load them up and then put them into a list that you can filter and sort, and it is taking too long.
Could you share your custom catalog files with me - I will use them to test to try to find a way to make this usable with a large number of custom items.
cheers,
Robin
I think the problem is too many targets in your custom lists. It tries to load them up and then put them into a list that you can filter and sort, and it is taking too long.
Could you share your custom catalog files with me - I will use them to test to try to find a way to make this usable with a large number of custom items.
cheers,
Robin
Re: Goto Co-ordinates in Tools
The file that was too large was mag17. The smaller file mag16 loads ok.
files are in cloudy nights forum:
https://www.cloudynights.com/topic/8069 ... p=11671699
Don
files are in cloudy nights forum:
https://www.cloudynights.com/topic/8069 ... p=11671699
Don
Re: Goto Co-ordinates in Tools
The PGC file that was too large was mag17. The smaller file mag16 loads ok.
files are in cloudy nights forum:
https://www.cloudynights.com/topic/8069 ... p=11671699
Don
files are in cloudy nights forum:
https://www.cloudynights.com/topic/8069 ... p=11671699
Don
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Goto Co-ordinates in Tools
Thanks Don, I will give it a try and see what can be done.
cheers,
Robin
cheers,
Robin
- admin
- Site Admin
- Posts: 13350
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Goto Co-ordinates in Tools
Hi Don,
I had a look at this and see the same sort of freezes, although on my machine it needs the mag18 database before the problem becomes really bad. I have some tweaks that improve the performance by at least a factor of 2 on large lists that I will be putting into the next SharpCap 4.1 beta update. For me, that makes the mag17 list pretty usable and the mag18 one usable if you are patient (as it is slow updating)
cheers,
Robin
I had a look at this and see the same sort of freezes, although on my machine it needs the mag18 database before the problem becomes really bad. I have some tweaks that improve the performance by at least a factor of 2 on large lists that I will be putting into the next SharpCap 4.1 beta update. For me, that makes the mag17 list pretty usable and the mag18 one usable if you are patient (as it is slow updating)
cheers,
Robin