I have acquired on a speculative basis one of the above but I can't find any current instructions for its use under Windows 10 etc nova don't seem to be around now so am a bit of a loss. The camera has the original USB software stich circa 20i6 it looks like.
Can anyone advise on on how to simply get the camera up and running please under Sharpcap?
Thanks
iNova NBB-CX Colour Camera
-
admin
- Site Admin
- Posts: 13347
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: iNova NBB-CX Colour Camera
Hi,
if it is going to work then the steps will be
* Install Windows System driver for camera - hopefully on your CD, since although I have an archive of iNova drivers, they are all PLA/PLB/PLC
* Install SharpCap 32 bit (not 64, since iNova never produced a working 64 bit SDK)
* Plug camera in
* Run SharpCap.
If SharpCap detects your camera as an iNova camera then you have a decent chance of it working. Unfortunately unless any errors are relatively basic, there is not much I can do to fix issues as iNova seems to have gone.
Please note that I am planning to remove iNova support from the next version of SharpCap (4.1), however you will be able to continue using SharpCap 4.0
cheers,
Robin
if it is going to work then the steps will be
* Install Windows System driver for camera - hopefully on your CD, since although I have an archive of iNova drivers, they are all PLA/PLB/PLC
* Install SharpCap 32 bit (not 64, since iNova never produced a working 64 bit SDK)
* Plug camera in
* Run SharpCap.
If SharpCap detects your camera as an iNova camera then you have a decent chance of it working. Unfortunately unless any errors are relatively basic, there is not much I can do to fix issues as iNova seems to have gone.
Please note that I am planning to remove iNova support from the next version of SharpCap (4.1), however you will be able to continue using SharpCap 4.0
cheers,
Robin